Availability
Showing In Stock Items. Show All 29 Items.
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$12.53
—
$19.23
Classic Tube automatic transmission vent lines are designed to replace your OEM vent lines. They are pre-bent, formed, and ready to install with fittings for a direct bolt-on fit. The vent lines are available in steel or stainless steel to fit your specific vehicle's needs.
Not Yet Reviewed
$14.99
Summit Bucks
Sonnax Line pressure booster kits allow you to shift aggressively and then feel the tranny grab the clutches with more power when it changes gear. The larger boost valves and matching regulator springs raise line pressure progressively as higher pressure is commanded. These kits modify the sensor signal, which causes the computer to create a pressure increase. They're installed between the pressure sensor and vehicle harness using OE-style sealed connectors; no modifications are needed to the transmission.
( 14 )
$17.12
Howe remote bleeder kits allow you to bleed your hydraulic throwout bearing from outside the bellhousing--making clutch bleeding easy. The kit includes one 36 in. long and one 22 in. long braided stainless line along with fittings to fit in place of the bleeder screw on either style of a Howe hydraulic throw-out bearing.
( 12 )
$10.99
In high performance and racing applications, it's important to avoid restriction and maintain line pressure by keeping a good supply of clean, fresh fluid to the pump. Summit™ Hi-Flow race transmission filter kits eliminate the restrictive factory-style filter element and instead use a low restriction brass screen that allows maximum flow and filtration which is the key to consistency, performance, and long life. We recommend these for all high performance applications that utilize a full-manual or trans-brake valve body.
( 9 )
$18.99
If you're having trouble with your hydraulic clutch releasing, there's a good chance you may have air in the system. Bleeding your clutch line can be done more easily with Russell hydraulic clutch speed bleeder assemblies. These are a replacement for your original bleeder valve, with a spring-loaded one-way ball and check valve design. When opened, this unique setup allows the old fluid and air out, and then closes automatically between pumps to prohibit the old air and fluid from re-entering the line. It's a real time-saver!
( 10 )
$15.95
Auto Metal Direct pivot ball studs are part of AMD's extensive line of OE-quality replacement parts made to help you get your car or truck back into top condition. AMD pivot ball studs are accurately-machined reproductions that are the correct length and heat-treated for hardness. They feature a black oil finish and, where applicable, include factory-style integral rubber seals.
( 27 )
$13.99
—
$16.99
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$13.40
—
$14.67
On Sale
Get a classic look without breaking the bank! The Scott Drake line of reproduction transmission fluid dipsticks is manufactured from quality materials, ensuring a proper fit.
( 18 )
$21.37
$19.23
Summit Bucks
Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear
( 4 )
$18.83
If your transmission isn't performing properly, then you may need one of these TransGo automatic transmission boost valves. They are available in different diameters that provide increased line pressure so that your transmission will work correctly when used under conditions other than what the factory intended. Get the correct pressure with TransGo automatic transmission boost valves and you'll increase your transmission's reliability.
( 29 )
$15.74
—
$18.64
Keep your differential serviced with Yukon Gear & Axle pilot bearing retainers. They're available in aluminum and steel models to work with hundreds of 8 in. and 9 in. axle applications. Yukon offers a full line of top-quality small parts to keep the big parts operating at premium levels. Tap in your Ford pilot bearings in with retainers from Yukon Gear & Axle.
( 5 )
$11.99
Summit Bucks
The Sonnax automatic transmission reverse servo spacers provide a simple, low-cost way to add durability to the GM 4L80-E and 4L85-E transmissions and eliminates the need to retrofit early design reverse servo pistons into late units. Due to a design change in 1996, it had been found that the reverse servo piston commonly breaks because it is stressed more than early servos. Installation of Sonnax reverse servo spacers reduce piston stress by increasing the contact area between the aluminum piston and spacer and incorporating a cushion spring washer. The new contact area is over two times the original and the pressure between the piston and the spacer is reduced by 60 percent. The reverse servo spacer kits easily install during assembly and does not require machining or other modifications. Excessively high line pressure in 'Reverse' is directly related to boost valve wear and cross-leaks into the EPC oil circuit. For maximum durability, inspect and replace the boost valve with one of the Sonnax 4L80-E boost valve kits (sold separately). Product features and benefits: * Increased contact area reduces pressure between apply pin and piston by 60 percent * Added Belleville spring washer reduces shock on piston * No machining necessary, drop-in components * Maximum durability for minimal cost
Not Yet Reviewed
$12.91
Summit Bucks
In listed GM transmissions, severe wear of the TCC regulator valve bore from the OE valve allows regulated converter apply pressure to exhaust. This is a primary cause for a TCC-related 1870 slip code and overheated converters. Exhausting apply pressure also diminishes line pressure, which results in burnt clutches. Excessive wear at the isolator valve bore reduces TCC apply pressure. Sonnax isolator sleeve kits (77754-ISO) in combination with Sonnax TCC regulator valve kit 77754-03K or 77754-04K allow you to restore hydraulic integrity of the apply circuit. Sleeves are manufactured from highly wear-resistant aluminum to provide full support for the valve and prevent side loading. Includes retaining ring and sleeve.
Not Yet Reviewed
$12.96
Summit Bucks
Stop leaks while reviving line pressure and torque converter clutch (TCC) operation by installing Sonnax O-ringed end plug kits. OE end plugs prevent critical pressure loss by capping the bore while also functioning as a valve stop. Trust the Sonnax O-ringed end plug kits designed for your application to help you cross the finish line!
Not Yet Reviewed
$10.67
No matter what decade your Jeep rolled off the assembly line, it goes without saying that you shift gears early and often. When your clutch linkage components begin to show their age, Crown Automotive offers a large selection of replacements--such as adjusters, springs, pedal rods, yokes, clevises, bellcrank bearings, and bushing clips. These parts are precision-manufactured from quality materials to provide the correct fit and function for specific models.
( 1 )
$10.99
—
$16.99
Pro-X offers a full line of clutch components, all made by leading OE manufacturers from the finest materials. Pro-X Racing Parts' complementary clutch cover gaskets complete their line of components with precision-cut, high-quality pieces that deliver the ultimate sealing. Choose the gaskets designed for your off-road machine.
Not Yet Reviewed
$10.99
—
$18.99
Clearance
Centric Premium clutch master cylinders match or exceed original equipment parts in quality, configuration and fitment. The Centric Parts line of clutch slave cylinders is the most complete in the automotive aftermarket. Cylinders are complete and are manufactured under the highest quality standards by OEM and OES manufacturers.
( 1 )
$27.99
$19.50
TransGo automatic transmission shift kits include the needed items to restore proper function to your valve body with much improved drivability and durability. A wonderful addition to your OEM classic vehicle. Features and benefits: * Raises overall line pressure * Calibration for a higher speed manual low * Crisp shift performance and more durability
( 5 )
$10.43
Summit Bucks
Need to solve your slow-moving servo? Sonnax servo return springs are your answer. Available in several spring rates makes tuning your transmission easier than ever. Made from high quality materials, these springs will provide consistent performance you can trust.
( 3 )
$15.14
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
