Availability
Showing In Stock Items. Show All 28 Items.
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 48 )
$198.99
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$500.02
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$627.68
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$755.33
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$819.16
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 8 )
$230.99
—
$238.99
Replace your worn-out concentric slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The concentric slave cylinder (CSC) combines the clutch release bearing and the slave cylinder to an integrated unit. As a result, the release fork between the clutch release bearing and the slave cylinder as well as the respective bearing points are not required. Assembly takes place directly on the transmission. All Sachs concentric slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model designed for your application needs.
Not Yet Reviewed
$97.99
Replace your worn-out clutch master cylinder with affordable Sachs Stock Replacement parts. The clutch master cylinder, or clutch pump, is the main type of hydraulic clutch operating system. This simple hydraulic principle is used to transmit the required force from the clutch pedal to the slave cylinder. As part of the clutch system, this part is connected on one side to the clutch pedal via a lever mechanism. The other end is connected via a hose to the slave cylinder, which moves the clutch. These vital components allow the driver to manipulate the clutch pedal correctly, always with less effort than would be needed if this part were not present in the vehicle. Sachs clutch master cylinders are built to OEM specifications to offer the same fit, form, and function as the factory OE part to help you restore your vehicle back to its proper operation. Select the Sachs Stock Replacement clutch master cylinder for your application.
( 1 )
$41.99
Beck/Arnley clutch master cylinders are high-quality, direct-fit OE replacement master cylinders. They will restore proper clutch operation while extending clutch life. These direct replacement parts meet or exceed OEM specifications.
( 8 )
$67.99
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
Not Yet Reviewed
$485.99
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$275.99
Centric Premium clutch master cylinders match or exceed original equipment parts in quality, configuration and fitment. The Centric Parts line of clutch slave cylinders is the most complete in the automotive aftermarket. Cylinders are complete and are manufactured under the highest quality standards by OEM and OES manufacturers.
( 1 )
$75.99
Clutch master cylinders should be the first thing checked when you experience shifting problems with your vehicle's manual transmission. Centric Brakes offers a wide range of premium clutch master cylinder replacements, constructed to meet the highest standards outlined by OES and OEM manufacturers. They're a direct fit and (where applicable) come with complete reservoirs, floats, switches, and aluminum casting body design. Centric Brakes premium clutch master cylinders match the factory fitment, quality, and configuration—and will get you flying through gears as you're moving down the road. Order the model recommended for your application.
Not Yet Reviewed
$35.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$206.99
—
$252.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$85.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
