Availability
Showing In Stock Items. Show All 152 Items.
B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.
( 13 )
$4,049.95
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$449.95
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 9 )
$288.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$625.95
—
$1,049.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$44.95
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 88 )
$72.55
—
$126.95
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.95
—
$176.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$205.95
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,065.99
—
$3,041.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$749.95
—
$999.95
TransGo automatic transmission reprogramming kits are designed with performance in mind. Most, but not all models contain additional features like Gear Command that allows you to hold manual low to any speed, and shift back to low at any speed. They are great for strip cars or 4x4 rock crawlers needing to select low and not have it upshift. Most TransGo automatic transmission reprogramming kits can be tuned for HD (Heavy Duty) use by following the recommendations in the kits.
( 38 )
$232.86
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 46 )
$128.99
—
$292.99
ACDelco offers transmission bellhousings for a wide range of vehicles from the 1990s and up. Built from aluminum, these GM-recommended replacements deliver the quality and durability of original equipment, plus a factory fit and solid performance. The bellhousings are available for nearly two dozen transmission models. Order the unit designed for your application.
( 8 )
$240.99
—
$263.99
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 368 )
$384.95
—
$399.95
ACDelco GM Genuine Parts flexplates are designed, engineered, and tested to rigorous standards and backed by General Motors. They're true OE parts that will replace your originals with the same fit and performance, and are updated to integrate new materials and technologies. Order the flexplate model recommended for your vehicle.
( 7 )
$128.99
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$169.95
—
$256.95
ACDelco GM Genuine Parts automatic transmission clutch housings are a factory-recommended replacement component. They will provide the same performance, durability, and service life you expect from General Motors. Order the clutch housing designed for your vehicle application.
( 3 )
$190.99
—
$424.99
Properly secure your flywheel with these flywheel bolts from Chevrolet Performance. These high-quality bolts feature steel construction with a durable black oxide finish.
( 5 )
$4.99
Clearance
ACDelco Gold automatic transmission fluid filters can help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. On-time maintenance can extend your transmission's life and keep it operating efficiently. Perform service with ACDelco Gold automatic transmission fluid filters.
( 49 )
$25.99
—
$45.99
These TransGo lockup valve kits contain new parts to maximize torque converter life in high-mileage OEM transmissions. They will help your transmission to operate more efficiently and improve overall reliability.
( 6 )
$46.43
ACDelco automatic transmission tailhousings fit your vehicle to deliver the same OE performance, durability, and service life as their original counterparts. They provide factory form for an easier install and a repair that stays on budget. Each of these transmission case rear extensions includes the correct seal for a tight connection. Dozens of models are available for vehicles from the 1990s and up. Order the tailhousing recommended for your application.
( 12 )
$99.99
—
$147.99
Dorman transmission pans are the perfect OE replacements for those rust-prone parts. Some things just don't last forever. So, when it's time to replace your transmission pan, look to Dorman for the qualities, fit, and function you need to keep your vehicle on the road. Check and service your parts often and replace them with Dorman.
( 87 )
$56.95
—
$114.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
