Availability
Showing In Stock Items. Show All 18 Items.
Prevent front driveline issues on your lifted truck with the BDS transfer case indexing ring kits. At 6 in. of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate vibrations. BDS T-case index ring kits have optimal spline engagement and are dual-drilled to allow positioning for compatibility with a range of lift heights. Rounding out each kit is a billet aluminum driveshaft spacer and all the hardware needed to complete the installation. Key features: * Indexing rings eliminate front driveline vibrations * Proper clearance prevents cross-member interference * Heavy-duty steel construction for maximum strength * Designed with optimal spline engagement to prevent transmission to transfer case damage
( 1 )
$193.95
—
$568.95
Advance Adapters Atlas transfer case adapters provide the fit, form, and function to help bolt a transmission onto your vehicle. They feature high-quality materials and strict design requirements that meet or exceed OE specifications—critical to ensuring an easy installation and dependable operation. Choose the Advance transfer case adapter recommended for your transmission application.
( 6 )
$221.63
—
$248.41
Most transmission and transfer case boots get put through the ringer. If your old boots are deteriorated or torn up, replace them with Crown Automotive shifter boots. These rubber boots are fashioned identically to the originals, down to the bolt holes. Crown Automotive shifter boots bring OE style and performance to your ride.
( 35 )
$23.99
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,299.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$139.99
RT Off-Road offers axle shift fork kits for Dana 30 front axle applications. These complete replacement kits include a steel shift fork, disconnect housing gasket, clips, snap rings, and hardware (disconnect housing bolts) to perform the upgrade. The axle disconnect shift fork is designed to fit into the heart of the vacuum disconnect mechanism, which provides a sturdy replacement for the factory component on select Jeeps and submodels.
( 1 )
$31.99
Trail-Gear offers transfer case flanges that will allow Toyota owners to run a driveshaft in 1310 Series or 1350 Series, single joint, or double Cardan. Converting things over to the American-style components will make it easier to have a driveshaft made to fit from just about any driveshaft shop. Plus, if you are one of the people who are running big tires and dual cases, you can finally upgrade to the 1350 series and avoid breaking driveshafts. Trail-Gear transfer case flanges are made from forged SAE 5140 chromoly steel with drilled bolt patterns and are available in models with or without a dust shield.
Not Yet Reviewed
$59.99
Rough Country transfer case drop kits allow for better driveshaft angles reducing driveline vibration. They offer easy bolt-on installation and include hardware. Select the kit designed for your vehicle.
Not Yet Reviewed
$39.95
—
$69.95
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$143.99
Advance Adapters transfer case adapters will save you a lot of time and headaches. They allow you to retain the stock location of your transfer case for a quicker, easier transmission swap. The adapters are made from high-quality materials for excellent durability.
( 94 )
$267.71
—
$287.18
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$23.99
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,366.99
Skyjacker transfer case indexing rings are designed to re-clock the transfer case in a better position. They will allow you to use your factory front driveshaft without making any modifications. A required transfer case seal adapter is sold separately.
Not Yet Reviewed
$297.50
—
$391.13
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
