Availability
Showing In Stock Items. Show All 36 Items.
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$118.99
—
$228.99
It's always a plus when we get something that exceeds our normal expectations. Many off-road enthusiasts buy Trail-Gear Creepy Twin transfer case shifters in order to drive in 2WD low—not realizing how much easier the twin sticks make it to shift in and out of 4-low. Access to 2WD low comes in extremely handy in tight switchbacks and other places on the trail where gear reduction is necessary, but 4WD isn't. These shifters are built to impress, with polished cast aluminum bases, black wavy heat-treated 1020 steel shifters, chromoly internal crosspin, and two shift knobs—one for 4.70 and the other for 2WD/4WD. Creepy Twin shifters also feature a splash-resistant oil breather, O-ring seal around each lever, and shifter gasket. To allow independent operation of the shift rails, you'll need to remove the interlock pin from the transfer case. Make 4-wheeling easier with Trail-Gear Creepy Twin transfer case shifters.
( 4 )
$299.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "A" kits contain the parts you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "A" conversions include shift rails, fork, fork tube, and roll pins.
( 2 )
$199.99
Get a grip! Be kind to your hands and replace your broken, loose, or flimsy knobs with quality replacement parts from Crown Automotive. Their transfer case shift knobs will complement your project. Whether it's a restoration or a rebuild, Crown can help complete your gearshift setup.
( 5 )
$16.99
Gain independent control of your transfer box with Advance Adapters twin-stick shifters. They provide the construction, materials, and parts you need for dependability and installation ease. Advance Adapters twin-stick shifters make transfer case shifting easier and provide other gear selections like 2WD or 4WD, high or low, and rear or front-wheel drive.
( 2 )
$201.28
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "C" kits are the most complete packages for those of you running a dual T-case setup. These kits contain all new parts and are machined to accept 4.7 input gears. Trail-Gear Top Shift "C" conversions include everything you need—even a twin stick—to accomplish your conversion properly. These kits include: * Shift rails * Shift fork * Shift fork tube * Roll pins * Twin stick shift kit * T-case block off plate * Gaskets
Not Yet Reviewed
$379.99
Trail-Gear offers transfer case rebuild kits for a variety of applications, including many Toyota and Suzuki trucks from the 1970s, '80s, and '90s. Kits contain all minor gaskets, seals, and bearings for Toyota gear-driven transfer cases from 1979-95. Only top-quality Toyota OEM gaskets are used. Bearings include SKF, NSK, NACHI, and KOYO. Does not include flange nuts, or needle bearings.
Not Yet Reviewed
$349.99
—
$499.99
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,299.99
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 17 )
$17.99
Summit Bucks
ACDelco GM Genuine Parts transfer case adapter gaskets are manufactured to be exact replacements for your vehicle. With these GM Genuine Parts replacements you can rest assured of premium quality, as well as peace of mind that the fit, form, and function meet their high standards and yours.
Not Yet Reviewed
$9.99
OMIX-ADA twin stick transfer case shifters are designed to allow for easier transfer case shifting and other gear selection options, like 2WD low and front-wheel drive. They feature quality, durable components matched to your specific transfer case model.
( 5 )
$159.99
Abuse and general wear and tear over time will take its toll on your hubs. Mile Marker hub service kits provide the correct parts for maintaining their locking hubs and getting your vehicle back on the trails. Most of these kits include new hardware, snap rings, and O-rings designed to bring new life to your hubs. Freshen up your hubs with Mile Marker hub service kits.
( 5 )
$29.00
If you're experiencing standard-issue clip failure, Crown Automotive transfer case shifter clips will get you back in gear. Your square brackets that the shift lever fits over can break over time. If you have a shifter that is loose or wobbly, these Crown parts could make a big difference.
( 1 )
$7.99
Crown Automotive transfer case shift linkage repair kits are available to stop the thumping or creaking noise which you may have heard coming from the transmission tunnel area on acceleration, or while driving over bumpy roads. The bushings and boots can wear out, or the rubber gasket tears on the end. This allows the torque shaft to travel back and forth too much, causing one of the links to tap on the bracket on the tub. These kits come complete to solve that annoying rattle.
( 3 )
$16.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$139.99
Maintain proper driveline angles on your truck, SUV, or Jeep by installing a BDS transfer case drop kit. These new kits utilize one-piece, heavy-duty steel brackets or tube spacers, E-coated for durability and corrosion resistance, to drop the T-case to reposition the output shaft on lifted applications. The transfer case drop kit is sometimes required if you experience a slight driveline vibration. Choose the kit designed for your vehicle.
Not Yet Reviewed
$20.95
Crown Automotive transfer case shifter isolators are ideal replacement parts. They are designed and built to OEM specs for excellent fit and reliable performance.
( 2 )
$5.99
Crown Automotive shift rod poppet springs keep the shift rail in place. These Jeep manual transmission synchronizer springs are quality components from a trusted name in Jeep replacement parts. Verify attributes for proper fitment and transfer cases noted above.
( 1 )
$2.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$1.99
—
$90.99
Dorman wheel hub fasteners are designed to secure your hub assembly to the wheel. This wheel hub mounting hardware serves as a direct replacement and is made from high-quality steel for durability and corrosion resistance to offer a complete, convenient repair. For OE automotive repairs, look to Dorman.
( 14 )
$7.99
These gears allow you to replace the input gear in your transfer case gear set or install your gear box in a case with a different input. Made from heat-treated and carburized SCM415 alloy steel these gears are built to last.
Not Yet Reviewed
$199.99
Get rock-crawling control with the addition of Trail-Gear reduction gears. Lower case gears can provide the enhanced trail performance you want, and these reduction gears are precision-ground and micro-polished to do just that—at an affordable price. Gears, gaskets, seals, and possibly more (depending on the gear set chosen) are available, as well as a choice of spline configurations. Keep your rig in high performance with Trail-Gear low-range climbing reduction gears.
( 7 )
$599.99
Trail-Gear dual case adapter couplers are designed to work with OEM and Trail-Gear input gear splines. These high-strength splined couplers are made from heat-treated and carburized SCM415 alloy steel and used to upgrade your rear input from 21-spline to 23-spline, or to replace a worn coupler. These dual case adapter couplers are available in 21- or 23-spline (please count the input splines on your rear case input shaft) and may not work with other manufacturer's aftermarket gears. The 26-spline models are designed to fit 2.7 manual transmission style adapters only! Choose the dual case adapter couplers in the model designed for fitment on your application.
Not Yet Reviewed
$159.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
