Availability
Spicer Drivetrain Products offers the most advanced driveshaft technology, delivering peak performance for your vehicle. From stub shafts and carrier bearings, to support washers and more, Spicer essential driveshaft components can help maintain light and commercial vehicles, off-highway, military, industrial, and performance applications. Order the replacement parts recommended for your vehicle.
( 11 )
$1.50
—
$354.99
Summit Bucks
Sonnax Mustang flanged yokes are for the builders of Mustang driveshafts who want to upgrade from a 1330 U-joint. Those builders have long had to make due with purchasing an extra adapter flange to allow installation of a 1350 flange yoke. Now, with Sonnax flange yokes, the days of sourcing an extra adapter are over. Sonnax yokes are forged and precision-machined to accept a 1350 U-joint while maintaining compatibility with the OE 3.5 in. bolt circle.
( 4 )
$137.91
Classic Performance carries replacement carrier bearings to maintain driveshaft support. If you have altered your ride height, you've possibly increased the wear and tear on your carrier bearings. Classic Performance offers OEM rubber and heavy-duty polyurethane choices to restore proper performance.
( 10 )
$33.99
—
$128.99
These Steeda driveshaft spacers eliminate the need to have custom shafts made for length deficiencies of 3/8 in. to 11/16 in. They greatly reduce the chance of slip yoke failure by maintaining proper engagement. These parts were developed by Steeda Hardcore for the Renegade Mustang to fit a C4 transmission. Steeda manufactures these spacers from billet aluminum for a lower rotational mass and they are anodized for a long-lasting finish. The kits include Grade 10.9 hardware and are laser-engraved with the Steeda logo to ensure high quality.
( 11 )
$84.95
Sierra Marine heavy-duty U-joints include both straight and 90-degree grease fittings. These universal joints are direct-fit units providing the same performance. Service and maintain your watercrafts with Sierra Marine.
Not Yet Reviewed
$20.99
—
$119.99
Yukon Super Joints give you the ultimate in competition-tough front axle U-joints. To maintain their performance, they offer a line of top-quality small parts. Yukon Gear & Axle Super Joint rebuild kits include four caps, four zerk fittings, four O-rings, and four full circle snap rings to service one joint.
Not Yet Reviewed
$154.99
—
$163.99
Crown Automotive driveshaft components are available for maintaining many driveshaft applications when replacement hardware is needed. Order the parts designed for fitment on your make and model.
( 3 )
$7.99
D.I.D is the #1 chain manufacturer in the world and their chains are used by factory race teams. Super non-O-ring chains are D.I.D's highest-quality non-O-ring chains in overall combined performance. Maintain your super non-O-ring chain with D.I.D Racing Chain super non-O-ring master links that have strength comparable to that of the other links that make up the factory-assembled chain body. They are available in a variety of chain sizes.
( 1 )
$3.99
—
$4.99
Clearance
Strange 2-piece driveshaft couplers will ease your transmission maintenance. These units collapse by removing the splined lock collar, leaving your engine and rear-end undisturbed. They are offered in two lengths and a choice of materials. Choose either through-hardened Hy-Tuf ultra-strength alloy steel and aluminum lock collars splined for maximum contact area, or their special case-hardened couplers for roller bearing extension housings. Removing and maintaining your transmission is easier when you use Strange 2-piece driveshaft couplers.
Not Yet Reviewed
$374.99
$287.50
—
$374.99
Longfield offers U-joint rebuild kits to maintain a variety of Dana applications. Designed to rebuild your Longfield 300M U-joints, these kits include U-joint caps with brass bushings pressed in, cap grease seals, and C-clip retaining rings for one joint.
Not Yet Reviewed
$114.11
Clearance
Sunstar standard steel sprockets are long-lasting sprockets designed for exceptional fit and performance. They are constructed from 1045 high carbon steel with an exclusive heat treatment for added strength and durability. These sprockets also receive a special treatment to aid in resisting rust and corrosion. Sunstar has supplied the global market with the deepest range of sprocket options since 1946, and their standard steel sprockets are another example of their leading-edge design, testing, and technology. Always gear-up with Sunstar standard steel sprockets to maintain a top-performing bike.
( 2 )
$81.99
$16.50
—
$89.99
D.I.D Racing Chain is the #1 chain manufacturer in the world and their chains are used by factory race teams. D.I.D 520 ATV X-ring racing chains are designed exclusively for the severe demands of ATV racing. Maintain your ATV X-ring chain with D.I.D Racing Chain ATV X-ring master links that have strength comparable to that of the other links that make up your factory-assembled chain body.
( 1 )
$9.99
Clearance
Sunstar Powerdrive countershaft sprockets are long-lasting sprockets designed for exceptional durability and reliability. They are constructed from case-hardened chromoly steel and are specially treated to resist rust and corrosion. Sunstar has supplied the global market with the deepest range of sprocket options since 1946, and their Powerdrive countershaft sprockets are another example of their leading-edge design, testing, and technology. Always gear-up with Sunstar Powerdrive countershaft sprockets to maintain a top-performing bike.
( 1 )
$30.99
$15.50
—
$62.99
HardDrive offers carbon tooth sprockets for a wide range of applications, including many Harley-Davidson© street bikes from 1984 and up. These replacements feature an aluminum carrier that's 70 percent lighter than steel, along with a durable, long-lasting carbon steel tooth ring. Forging rivets into the sprocket provides exceptional strength. A hub adapter ring provides installation on 1984-99 and 2000-22 type hubs, while maintaining surface engagement between sprocket and wheel. The sprockets have an anodized black carrier with black zinc passivation and clearcoat finish. They're available in different tooth counts.
Not Yet Reviewed
$115.16
HardDrive offers rear steel sprockets for a wide range of applications, including many Harley-Davidson street bikes from 1984 and up. These replacements are CNC-machined from carbon steel that is specifically engineered for gears, sprockets, and shafts. Each part is hardened for maximum impact and wear resistance. Steel sprockets are used in conversions from belt to 530 chain—and come flat. The sprockets are available in multiple tooth counts. Additional details: * Some alignment spacing will be required and best used in conjunction with the HardDrive transmission sprockets that provide multiple offsets * Hub adapter ring provides installation on 1984-99 and 2000-22 type hubs, while maintaining surface engagement between sprocket and wheel * Sprockets comes in a black zinc passivation coating with a clearcoat finish
Not Yet Reviewed
$92.66
Sierra Marine offers gimbal bearings to fit a variety of MC-1, R, MR, and Alpha, Gen II, Bravo I/II/III and other watercraft models. These specialty ball bearings/races are used in boat engine driveshafts to help maintain alignment. The stock replacements meet or exceed OE quality. The bearings are fit-specific; be sure to match up part numbers to ensure a proper fit.
Not Yet Reviewed
$69.99
—
$149.99
Maintain your Jr. Dragster's performance with JR Race Car 7 in. reverse driven hardware kits. Kits include: * Three 1/4 in. wide jackshaft spacers * One 3/4 in. jackshaft locking collar * One 3/16 in. x 2 1/2 in. key
Not Yet Reviewed
$23.47
On Sale
Quicksilver Black Max propellers offer good overall performance and value. While Black Max aluminum propellers are standard equipment on most boats with Mercury, Mariner, and MerCruiser power, they are perfect replacements for all engine brands through the use of the Quicksilver Flo Torq II hub system. The Black Max is recommended for use on boats with up to 250 hp and with a top speed of less than 50 mph. The high-quality casting and durable high-gloss Phantom Black finish make it easy to maintain and repair.
Not Yet Reviewed
$198.99
$179.09
On Sale
For good overall performance and value, the Black Diamond is your prop. While Quicksilver Black Diamond propellers are standard equipment on most boats with Mercury Mariner Mercruiser power, they are perfect replacements for all engine brands using the Quicksilver Flo Torq II hub system. Black Diamond propellers are recommended for use on boats with up to 250 hp and with a top speed of less than 50 mph. The high-quality casting and durable high-gloss Phantom Black finish make them easy to maintain and repair. Choose the Black Diamond 3-blade aluminum propeller designed for your marine engine.
Not Yet Reviewed
$78.93
—
$592.60
$71.04
—
$533.34
On Sale
Quicksilver Nemesis propellers feature the most aggressive geometry available in an aluminum propeller. They have more cup for best-in-class acceleration and holding, a tenacious grip in turns and their high-rake, reduced diameter design helps maintain top-end speed. Nemesis 4-blade propellers will provide a 16 to 25 percent faster acceleration and superior holding with no penalty in top speed vs. a comparable 3-blade aluminum propeller. Select the Quicksilver Nemesis preferred for your engine.
Not Yet Reviewed
$200.71
$180.64
The Renthal 1XR 104mm retaining chainrings' main benefits are their superior chain retention due to their alternating narrow/wide tooth profile, high durability from 7075 T6 aluminum construction, and excellent mud clearance from specially designed grooves and tooth shaping. These features work together to keep the chain securely in place, reduce wear, and ensure performance in varied conditions. Select the Renthal 1XR 104mm retaining chainring that's compatible with your bike's application. Additional features and benefits: * Made from strong 7075 T6 aluminum, the ring is CNC-machined and hard anodized for a durable surface finish, and an I-Beam cross-section is used to maximize stiffness and strength with minimal weight * Superior chain retention and durability for single-ring (1X) mountain bike drivetrains, especially in harsh conditions * Narrow/wide tooth profile—the alternating tooth widths interlock with the chain to prevent it from dropping, even in rough terrain * Chainring includes mud evacuation grooves and reduced shoulders between teeth to shed dirt and mud, maintaining performance and preventing "chain suck" in wet or muddy conditions * Improved efficiency and ride quality—the design provides security without any loss of pedaling efficiency and riders report a solid and direct feel when pedaling
Not Yet Reviewed
$69.26
—
$75.11
Renthal 1XR 94mm retaining chainrings provide superior chain retention, enhanced durability, and excellent mud clearance. Their alternating narrow/wide tooth profile securely holds the chain, while the design features like machined channels and mud grooves prevent mud and debris buildup, ensuring consistent performance and longevity. Select the 94mm retaining chainring designed to fit your specific SRAM crankset. Additional features and benefits: * Made from CNC-machined 7075 T6 aluminum, and hard-anodized for a durable surface finish * The 94mm BCD (bolt circle diameter) is designed for specific SRAM cranksets, allowing for a one-by (1X) drivetrain conversion * The alternating tooth widths, with their specific interlocking profile, keep the chain on the ring securely, reducing the risk of drops * The tall, square tooth-profile is designed to maintain retention levels, even as the teeth wear down * The narrow/wide design maintains efficiency, and the use of high-quality aluminum with an I-Beam cross-section ensures a strong and stiff chainring without excess weight * Special features like a machined channel extending down the narrow teeth, mud evacuation grooves between the teeth, and a profiled front on the wider teeth help clear mud and grime efficiently, preventing buildup that can cause chain derailment or premature wear
Not Yet Reviewed
$69.26
Renthal 1XR 96mm retaining chainrings offer superior chain retention, exceptional durability, and excellent mud clearance through their narrow-wide tooth profile and intricate design. They feature a CNC-machined 7075 T6 aluminum construction with specific tooth profiles to interlock tightly with the chain, while a special I-Beam cross-section provides strength and stiffness with low weight. These features result in a chainring that holds the chain securely in all conditions and lasts longer, even in challenging, muddy environments. Select the application needed. Additional features and benefits: * Made from CNC-machined 7075 T6 aluminum, and hard-anodized for a durable surface finish * The 96mm BCD (bolt circle diameter) is designed for specific SRAM cranksets, allowing for a one-by (1X) drivetrain conversion * The alternating tooth widths, with their specific interlocking profile, keep the chain on the ring securely, reducing the risk of drops * The tall, square tooth-profile is designed to maintain retention levels, even as the teeth wear down * The narrow/wide design maintains efficiency, and the use of high-quality aluminum with an I-Beam cross-section ensures a strong and stiff chainring without excess weight * Special features like a machined channel extending down the narrow teeth, mud evacuation grooves between the teeth, and a profiled front on the wider teeth help clear mud and grime efficiently, preventing buildup that can cause chain derailment or premature wear
Not Yet Reviewed
$69.26
Mopar Replacement crosspins and shafts are direct-fit OEM replacements that will provide the matching fit and function of your originals. Mopar differential cross shafts are manufactured from quality materials, and are the smart choice in maintaining the best performance of your Chrysler, Dodge, or Jeep vehicle.
Not Yet Reviewed
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
