Availability
Showing In Stock Items. Show All 36 Items.
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 196 )
$405.99
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$25.99
—
$30.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 22 )
$176.14
—
$192.96
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 151 )
$16.99
—
$56.99
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.
( 210 )
$12.99
—
$17.99
Moog Super Strength U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals and a grease fitting make for easy maintenance. In addition, the Super Strength U-joints have an exclusive microshield coating to protect against rust and corrosion. They are available in greasable and non-greasable styles for more than a dozen positions--in universal and vehicle-specific applications.
( 225 )
$16.99
—
$25.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$14.99
—
$19.99
On Sale
When it's time for a rebuild or to swap the transmission out for a 5-speed, Scott Drake slip yokes are the best bet for your Mustang. These yokes are specifically designed for your vehicle and will provide exceptional service. When it's time to rebuild or strengthen your yoke, go with the company synonymous with Ford--get Scott Drake slip yokes.
( 9 )
$149.95
Spicer Select solution is simple: to provide quality-built universal joints that are backed by the Dana name you know and trust. Spicer Select U-joints feature journal crosses that are manufactured from high-quality forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. These universal joints are engineered for exceptional fit and easy installation to maximize up-time. To keep your vehicle performing at its best, choose Spicer Select U-Joints by Dana.
( 1 )
$15.99
—
$39.99
Yukon Gear & Axle differential pinion yokes offer precise fit and strength for many applications. The yokes are manufactured from cast steel, forged steel, billet steel, and aluminum—and are available for fitment on dozens of specific axle applications. Choose the high performance strength of Yukon Gear & Axle differential pinion yokes for your build.
( 84 )
$94.99
—
$341.99
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$590.93
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$32.99
—
$107.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$955.34
—
$2,180.25
Dorman driveshaft bolts are strong mating points, securing the driveshaft to the axle flange. It is recommended that when servicing the driveshaft that you replace these one-time use parts. Dorman bolts are durable in design and feature a hardened steel construction for increased durability, along with a black oxide coating for extra protection against corrosion.
( 6 )
$14.99
These Steeda driveshaft spacers eliminate the need to have custom shafts made for length deficiencies of 3/8 in. to 11/16 in. They greatly reduce the chance of slip yoke failure by maintaining proper engagement. These parts were developed by Steeda Hardcore for the Renegade Mustang to fit a C4 transmission. Steeda manufactures these spacers from billet aluminum for a lower rotational mass and they are anodized for a long-lasting finish. The kits include Grade 10.9 hardware and are laser-engraved with the Steeda logo to ensure high quality.
( 11 )
$84.95
Machined from steel, Motive Gear universal joint U-bolt kits have a unique design that provides more bearing surface for the universal joint bearing cap. These bearing retainer bolts are available to fit most of the popular U-joint sizes and yokes. Choose the style that's compatible with your vehicle's axle model.
( 4 )
$12.99
Yukon Gear & Axle U-joint straps keep your driveshaft in place. These bearing retainer straps are available to fit most of the popular U-joint sizes and yokes. Choose the style that's compatible with your vehicle's axle model.
( 30 )
$22.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of the SKF Bearing U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards.
( 1 )
$15.99
—
$19.99
ACDelco Gold universal joints help transmit power from the transmission to the rear or front differential through the driveshaft or prop shaft. They allow for vertical movement of the shaft during its rotation. ACDelco Gold universal joints are premium aftermarket replacement components, manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 1 )
$24.99
—
$36.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$292.99
—
$1,042.99
Dorman pinion yokes are direct replacements for a proper fit and trouble-free performance. Engineered from cast iron for long-lasting durability, their driveshaft pinion yokes include high-quality seals constructed from a combination of rubber, metal, and plastic to prevent lubricant from leaking. These quality Dorman pinion yokes deliver no-hassle installation with headache-free operation.
( 5 )
$40.99
—
$199.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
