Availability
Showing In Stock Items. Show All 11 Items.
Sierra Marine trim cylinder kits are designed for use in Mercruiser Alpha Gen II stern drives. These repair kits are for use with the front and rear trim cylinder. For more than 50 years, Sierra Marine has been unmatched in quality and backed by rigorous engineering, testing, and manufacturing standards to produce the best parts in the marine industry. Sierra Marine's commitment to excellence ensures the highest degree of confidence where it counts the most: out on the water. Order the kit for your application needs.
Not Yet Reviewed
$880.99
—
$1,095.99
Need reinforcement? Artec Industries Ford 9 in. front axle trusses support and strengthen your front-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. No matter if your 9 in. housing is slightly offset or centered, the fit is still universal--simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle. Artec Industries trusses bolster your Ford 9 in. front axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$219.99
What is your suspension built on? Artec Industries 8.8 in. modular axle trusses provide the supportive framework and a good foundation for success. Manufactured from precision CNC-cut and bent 1/4 in. mild steel and reinforced with interlocking 1/4 in. thick gussets, these 8.8 in. trusses beef up your axles and the link mounting surface for maximum strength. They have a low-profile design, allowing link joints to be mounted with ideal geometry—and they're shorter, so you can mate them with factory or Artec leaf spring perches. Trusses include trim-to-fit bridges that tie into a flange off the pinion of the axle and fortify the might of the whole truss. Build a system designed to take serious abuse; start with 8.8 in. modular axle trusses from Artec Industries.
( 5 )
$259.99
—
$439.99
Artec Industries APEX rear axle trusses bring a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. Their key feature is their unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams--which can be lead to extra weld warping of the axle, longer install times, and inconsistency. The peaked structure strengthens the area between the coil perches and over the differential forming a solid structure where its typically most weak. Artec APEX rear axle trusses are the epitome of low cost, easy and quick to weld, simple, strong, and complete solutions for making your factory Jeep axle take more abuse than originally intended. Additional features: * CNC precision laser cut in-house from 3/16 in. mild steel * CNC precision bent in-house for great fitment * Lightweight yet strong solution--less than 10 lbs. * Designed used 3D models directly from Dana Corp and Jeep * 70 percent less welding needed than previous truss designs--less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction, but rigidity and strength * Contours the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock axles * Clearance cuts for e-locker plug removal and axle breather hose * Low-profile design, tight to the differential, allows usage in vehicles with only slight lift
( 1 )
$175.99
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 27 )
$209.95
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
