Availability
Showing In Stock Items. Show All 22 Items.
Low Range Off-Road e-locker electrical switches make it easy for you. These simple back-lit locker-specific rocker switches efficiently operate e-locker motors, as LROF can attest to as they have used DPDT (Double Pole Double Throw) switches for years on these lockers and they work great. Plus, they make your dash look clean. Offered with front locker or rear locker marking, select the switch needed. Specifications: * DPDT ON/OFF/ON momentary switch * Single independently wired incandescent light * No rear barrier between terminals * Rated 20 amps at 12 V Please note: Switches are meant to be wired independently from the factory wiring. They are not meant for use with the factory e-locker controller.
Not Yet Reviewed
$31.87
Get the right traction with Standard Motor Products 4WD selector switches. These 4WD dash mount OE replacement switches keep your rig ready for on and off-road adventures. Standard's robust switches are built with high-grade materials to meet your stringent demands. You're ready to travel on path or pavement, in wet or dry conditions, when you replace your old 4WD selector switches with new ones from Standard Motor Products.
( 5 )
$133.99
—
$876.99
On Sale
In late 1980s to mid 90s, Jeep used a vacuum actuator to shift the transfer case and corresponding front axles in and out of 2WD, and high or low 4WD. Crown Automotive 4WD front axle actuators will replace faulty vacuum switches to improve your vehicle's get-up-and-go, no matter the terrain.
( 8 )
$33.99
—
$174.99
$30.59
—
$157.49
On Sale
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
—
$2,799.95
$1,104.96
—
$2,379.96
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,129.99
—
$1,802.99
$858.50
—
$1,621.79
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
Spicer Drivetrain Products Trac-Lok differentials provide improved traction capability without requiring switches, wires, sensors, air hoses, or manual input from the driver. During a slip event, they automatically send approximately three times more torque to the high-traction wheel end, then returns to normal wheel-end differentiation as conditions change in order to deliver maximum vehicle handling. Automatic engagement, enhanced traction, and lightweight, Spicer Trac-Lok differential carriers ensure unparalleled performance for your vehicle.
( 1 )
$683.99
—
$1,302.99
On Sale
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$12.99
—
$88.99
$11.69
—
$80.09
On Sale
Clearance
Need traction? Zip! You've got it with Yukon Gear & Axle Zip lockers! With on-demand traction, these lockers offer an air-operated design that allows you to switch from an open differential to 100 percent lockup when you need it. Theses Yukon Zip lockers are the ultimate in driver selectability for the right traction, on-road and off. Built from forged cases with 4320 chromoly internals for added strength, they work with a variety of air-delivery systems and are assembled in the USA. Do you need gripping power--now? You have the control with Yukon Gear & Axle Zip lockers.
( 1 )
$1,243.99
—
$1,571.99
$956.50
—
$1,336.19
Richmond Gear has you covered with any replacement parts that you may need. From backup switches to shifters, tons of parts are available for the service and maintenance of your Richmond Gear transmissions.
( 9 )
$2.99
On Sale
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$5.99
—
$98.99
$5.39
—
$89.09
PEM Racing's quick-change differential yoke fasteners, along with PEM quick-change rear-ends, offer several advantages for racers and hot rodders, particularly in terms of flexibility and performance tuning. By adjusting the final drive ratio, drivers can match their car's gearing to the specific demands of the track, maximizing traction and acceleration. The ability to change gear ratios on-the-fly allows racers to maximize power delivery and acceleration where it's most needed for a particular track or event. Hot rodders can easily switch from freeway-friendly gearing to more aggressive ratios for stoplight-to-stoplight runs or quarter-mile passes.
Not Yet Reviewed
$2.99
On Sale
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need Crown Automotive pinion bearing cups. They're designed and built to OE specs for easy fitment and reliable service on stock axles. Always remember to purchase new bearings, too. When replacing the ring and pinion, use Crown pinion bearing cups for the right fit every time.
Not Yet Reviewed
$13.99
—
$16.99
$12.59
—
$15.29
Clearance
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$18.99
$12.50
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$1,206.99
—
$1,670.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
