Availability
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
Moser Engineering profiled spools are the lightest and most efficient steel performance upgrade spools offered. These differential carrier components will also extend the life of your rear-end by reducing deflection in the case and eliminating the possibility of side gear failure. Order the profiled spool recommended for your axle model.
Not Yet Reviewed
$370.00
The next generation of Artec Industries trusses are here! This low-profile truss design takes the years of race and recreational abuse of first generation trusses—and adds additional strength and functionality. Most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more up travel or those building low center of gravity vehicles. Order the model recommended for your application.
Not Yet Reviewed
$319.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$188.99
—
$1,039.99
Insufficient carrier bearing pre-load can result in premature bearing failure and ring and pinion failure in all differentials, and possible oil/air leakage issues in an air locker differential. ARB differential carrier shim installation drivers are professional service tools for installing/servicing common shim pre-loaded differentials. Most common Salisbury-style axle assemblies require the pre-load shims to be tapped into place to achieve the required pre-load during set-up. Tapping shims into a tight space from a single point on the outside edge of the shim can cause damage to the shim, rendering it useless, resulting in extra cost and labor. ARB's shim drivers are comprised of six different sized steel profiles designed to evenly distribute the installation force around the outside edge of a differential shim as it is tapped into place, allowing thinner shims to be inserted into tighter places than would otherwise be possible.
( 1 )
$85.00
SKF Bearings differential carrier bearing races are available for a wide range of applications and meet or exceed requirements for most applications. They incorporate logarithmic roller raceway profiles with an ultra-smooth surface finish for efficient and quiet operation. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety. For more than 100 years, the world's engineers, technicians, and mechanics have turned to SKF Bearings for the best possible solutions, shouldn't you?
Not Yet Reviewed
$8.99
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$17.95
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
—
$219.95
Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
Artec Industries patent pending 14-bolt rear Apex short axle trusses feature a stronger design, lighter weight and are much easier to install. The key feature that sets them apart from the other brands is their unique peaked-shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous truss versions with long weld seams can lead to extra weld warping of the axle, longer install times and can be inconsistent. Without long seams to weld, the 14-bolt rear Apex short axle trusses can be dropped directly on to the axle, and then these trusses can be welded to the axle faster. Additional part features: * Designed using 3-D models directly from Ford and Jeep for an amazing fit and clearance with surrounding components * CNC precision-cut in-house from 3/16 in. mild steel for a lightweight yet strong solution * Patent pending Apex peaked top design provides more rigidity than a flat top truss design * CNC precision bent in-house for a great fitment * Installation is simple; literally drop the truss in place on the axle and it's ready to weld, no puzzle piece assembling * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Truss is low-profile allowing link joints to be mounted with ideal geometry—about 9 in. from the axle centerline * Truss is designed to fit in between leaf springs or can be used as a base for mounting link suspension mounts * 2-piece design means smaller packaging and less shipping costs along with easy installation Important note: Requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this item. Every axle varies slightly, and some fabrication may be required.
( 1 )
$219.99
These Yukon Gear & Axle locking hubs feature all-steel construction, including chromoly internals, for the ultimate in durability and strength. They will not disengage under high-torque applications and default to the locked position under use. Engagement comes from just a 1/3-turn of the all-steel, low-profile bezel that offers improved ground clearance. The Yukon Gear & Axle locking hubs feature a proprietary coating on the locking gears for decreased friction and long life.
( 15 )
$434.99
—
$753.99
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$369.99
—
$429.99
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
—
$324.99
All Balls Racing complete 6-ball heavy-duty CV axles are designed and built as rugged OEM replacements with the current industry-standard of six ball bearings. They're engineered to handle the increasingly rough terrain and abuse you put your ATV/UTV through on a frequent basis. All Balls Racing complete 6-ball heavy-duty CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * 6-ball bearing * Chromoly steel * Stronger than OEM * 30 percent stronger than the competition * 50 percent longer lasting than the competition * High performance molybdenum grease reduces heat and friction * Precision-machined for precise OEM fitment * Black laminate coating with a gloss finish to resist rust and corrosion * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 4 )
$180.45
—
$244.10
Artec Industries JK APEX front axle trusses introduce a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. The key feature that sets the APEX truss apart is its unique peaked shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous versions with long weld seams have led to extra weld warping of the axle, longer install times, and can be inconsistent. This peaked structure not only applies to the axle tube between the coil perches, but extends underneath the coil perches as well—forming a complete truss from end to end of the axle, an industry first in an OEM axle application. The JK APEX truss has been tested and proved to hold up to both extreme applications and daily driving. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
Make your animal of an axle even better with Artec Industries AAM 11.5 rear axle trusses. These heavy-duty truss systems reinforce your American Axle Manufacturing axle to take on serious abuse, while also providing a flat surface to mount your upper links. The 3/8 in. thick truss top and 1/4 in. thick gussets incorporate a unique design to strengthen both the axle and the link mounting surface. Artec trusses feature a low-profile so your link joints can be mounted with the ideal geometry, and they allow for a selection of pinion angles. Support your AAM 11.5 rear axle with Artec Industries trusses.
Not Yet Reviewed
$399.99
All Balls Racing complete 8-ball extreme-duty CV axles are designed for more aggressive applications. They'll take on the rough terrain and abuse you put your ATV/UTV through on a frequent basis. These CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * Eight precision ball bearings deliver smoother operation and increased joint strength * Larger chromoly axle shaft * 35 percent larger bearing cages and races * Increased load capacity * 10 to 40 percent stronger the OE and competitor axles * Last up to 12 times longer * Precision-machined for precise OEM fitment * Black oxide coating with a matte finish that covers both joints for ultimate rust and corrosion protection * High performance molybdenum grease reduces heat and friction * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 1 )
$193.49
—
$259.30
Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.
Not Yet Reviewed
$131.99
—
$259.99
Artec Industries JK APEX front axle ultimate armor kits furnish everything you need to make your axle the strongest it can be. These packages include an APEX front axle truss, heavy-duty front LCA brackets, heavy-duty shock brackets, inner C-gussets, and APEX heavy-duty tracbar bracket. Armor kits are available for a variety of specific Jeep applications, in both stock and raised track bar height models. How is the ultimate armor kit better than the regular armor kit? This kit includes entire replacement LCA brackets and shock brackets, whereas the regular armor kit just adds a skid plate to the factory LCA brackets. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA brackets, shock brackets, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Gussets and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$406.99
—
$439.99
Artec Industries APEX rear axle trusses bring a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. Their key feature is their unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams--which can be lead to extra weld warping of the axle, longer install times, and inconsistency. The peaked structure strengthens the area between the coil perches and over the differential forming a solid structure where its typically most weak. Artec APEX rear axle trusses are the epitome of low cost, easy and quick to weld, simple, strong, and complete solutions for making your factory Jeep axle take more abuse than originally intended. Additional features: * CNC precision laser cut in-house from 3/16 in. mild steel * CNC precision bent in-house for great fitment * Lightweight yet strong solution--less than 10 lbs. * Designed used 3D models directly from Dana Corp and Jeep * 70 percent less welding needed than previous truss designs--less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction, but rigidity and strength * Contours the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock axles * Clearance cuts for e-locker plug removal and axle breather hose * Low-profile design, tight to the differential, allows usage in vehicles with only slight lift
( 1 )
$131.99
—
$175.99
When you've exceeded he limits of your Dodge 60 front axles, Artec Industries has the solution--heavy-duty trusses. Built from 3/8 in. thick mild steel truss tops with 1/4 in. mild steel ram mounts and gussets, these trusses are precision CNC-cut and bent for maximum strength. They are low-profile and span the entire length of your axle for complete reinforcement. Larger tires and aggressive driving ... maybe it's time to support your Dodge 60 front axles with trusses from Artec Industries.
Not Yet Reviewed
$359.99
More strength is a good thing! Artec Industries Dana 60 rear axle trusses beef up your axles to handle all kinds of abuse. They're built from 3/8 in. thick truss tops with 1/4 in. thick gussets to strengthen both the axle and the link mounting surface. The trusses span the entire length of the axle with their low-profile design that allows link joints to be mounted with ideal geometry. Install complete reinforcement that bolsters your axle's performance—Dana 60 rear axle trusses from Artec Industries.
Not Yet Reviewed
$389.99
A better fit to make your axle stronger and sleeker—Artec Industries Chevy 60 front axle trusses fortify your axle and are less likely to interfere with other vehicle components. Artec trusses are built with 3/8 in. thick mild steel tops and 1/4 in. mild steel ram mount and gussets. They feature a low-profile design and span the full length of your axle for complete reinforcement of the tubes against abuse. Enhance your rig's muscle with the support of Artec Industries Chevy 60 front axle trusses.
( 1 )
$324.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
