Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Differentials, Axles & Rear-End Parts
Showing In Stock Items. Show All 30 Items.
ARB Air Locker Replacement Parts
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 19 )
$39.95
Summit Racing™ Street-Strip Performance Clutch Kits
Summit Racing™ offers Street-Strip Performance clutch kits for hundreds of cars, trucks, and vans. They're ideal for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. These kits provide a heavier pedal effort than stock, along with improved holding capacity, making them excellent high performance replacement clutches. Order the size and options recommended for your vehicle. Additional details: * Can accommodate up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity * Kits include a pressure plate, disc, throwout bearing (unless specified otherwise), and alignment tool
( 6 )
$315.99
—
$474.99
Cardone New CV Drive Axles
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 93 )
$30.50
—
$168.99
Scott Drake Differential Vents
Scott Drake differential vents will replace your old vents and help your axle equalize atmospheric pressure, keeping excessive debris from contaminating the differential. These steel vents are strongly made for years of use; they screw into the threaded hole in the axle, while also securing the brake line and hose.
( 17 )
$19.46
Dorman Differential Vents
We all respond to pressure in different ways. Dorman differential vents equalize the atmospheric pressure in your vehicle's differentials. Vents deteriorate over time and can often get clogged, requiring replacement. These Dorman vents are constructed from high-quality materials and are manufactured to strict engineering quality standards. Prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out with Dorman differential vents.
( 8 )
$4.99
—
$7.99
ARB Differential Breather Kits
ARB differential breather kits are important to vent air pressure in drivetrain assemblies, and they eliminate the shortcomings of your factory breathers—especially when driving through water crossings. ARB units are high-flow, zero backpressure, zero vacuum breather systems. Each features a high-flow air filter within a central manifold that will allow up to four drivetrain assemblies to be vented to one central location--ideally somewhere on the vehicle that will be above the water level at all times. ARB differential breather kits are intended to replace your factory breathers and contain enough fittings and tubing to connect at least two drivetrain assemblies. Additional features and benefits include: * Axle breather manifold is machined from billet aluminum and anodized, making it lightweight and resistant to the elements * The manifolds have four axle breather ports, allowing for 1-4 breather lines to be connected * Very compact design, allowing them to be installed in virtually any location * The kits come with self-tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 in.) bolt or stud, which is the common size in most vehicle engine bays * The air filters are the ARB compressor air filters, which are splash-resistant with washable high-flow sintered bronze filter cartridges * 8mm polyethylene tubing is flexible, oil-resistant, water-resistant, and heat-resistant * 8mm tubing has been selected over the standard 6mm tubing to improve the airflow and reduce the chance of oil blockages in long breather lines * 8mm push-in fittings make installation simple and fast * Kits include anodized aluminum manifold with 5 ports (breather lines and air filter) and 2 mounting holes, air filter assembly, fittings, plugs, polyethylene tubing, screws, and cable ties
( 4 )
$89.95
Trail-Gear Creeper Breather Bellows
Trail-Gear Creeper Breather bellows prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They expand and contract to accommodate the increase or decrease in housing pressure. These TG replacements are made from flexible EVA copolymer plastic, just like the originals, and will fit onto 1/4 in. O.D. tube or barbed fitting (not included).
( 1 )
$16.99
Trail-Gear Creeper Axle Ball Gussets
Trail-Gear Creeper axle ball gussets beef up your knuckle balls. Big tires, bumpy terrain, and aggressive driving can take their toll. TG Creeper gusset kits reinforce the knuckle balls to prevent the outer knuckle ends from bending and damaging your solid axle. Kits include unpainted upper gussets with holes for mounting shocks, lower gussets, and steering stop gussets. Knuckle down, not under, to the pressures of rocky trails with the added support and strength of Trail-Gear Creeper axle ball gussets.
( 1 )
$99.99
Trail-Gear Creeper Breathers
Trail-Gear creeper breathers are designed to prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They will expand and contract to accommodate an increase or decrease in housing pressure. TG breather kits include one housing fitting, clamp, and bellow. Installation takes just a few minutes, with no hoses to route.
( 10 )
$39.99
Motive Gear Crush Sleeves
Do you need to install new crush sleeves? Motive Gear offers differential crush sleeves for controlled preload. You can depend on their steel collars to slip in between the bearings and keep the pressure on as you tighten down the pinion nut. If you're replacing a pinion seal or setting up your differential, use Motive Gear crush sleeves for preload control.
( 12 )
$2.99
—
$20.99
Richmond Gear Crush Sleeves
Preload control--Richmond Gear crush sleeves will prevent your pinion bearings from being preloaded too tightly and prevent the pinion nut from loosening up. These steel sleeves will keep the pressure consistent between bearings. Not too much, not too little; get preload just right using Richmond Gear crush sleeves.
( 2 )
$2.99
—
$3.99
Ratech Smart Sleeve Crush Sleeves
Ratech Smart Sleeve crush sleeves are a vast improvement over current crush sleeve designs. Ratech's patent-pending design maintains a consistent thrust pressure over the entire length change of the spacer. This results in a better cycle duty than that of solid spacers and shim packs.
( 43 )
$11.99
—
$92.99
Ratech Crush Sleeves
These Ratech crush sleeves are designed to compress as the pinion gear nut is tightened. They are also designed to compress without losing holding pressure, ensuring proper gear setup.
( 28 )
$4.99
—
$30.99
Spicer Drivetrain Products Axle Vent Fittings
Axle tube vent fittings act as a pressure-release valve for the differential, allowing expanding air to escape as the axle heats up and lets air in as it cools, equalizing internal pressure to prevent seal damage and leaks. Spicer Drivetrain Products axle vent fittings will equalize pressure preventing seal failure, leaks, and contamination. Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Not Yet Reviewed
$5.99
Crown Automotive Automatic Transmission Pans
A quality pan is essential for the performance of any automatic transmission. They serve as a reservoir for your fluid, which provides lubrication, cooling, and transmission fluid pressure. Crown Automotive offers a line of replacement automatic transmission pans built to withstand the rigors of many Jeep and Mopar vehicles. The steel pans have a protective black finish, and they are available in basic stock applications, or in deep pan style kits with additional components. Don't let old or leaky fluid pans lead to erratic shifting and decrease the lifespan of your automatic transmission.
( 4 )
$39.99
RESTOPARTS® Supplied Differential Vents
RESTOPARTS® Supplied offers differential vents, engineered to help prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out. Through the years, your vehicle's OE vents can become distorted or damaged. Keep your differential breathing in and exhaling right with these quality differential vents from RESTOPARTS®.
( 3 )
$16.99
CA Rear-End Vents
Rear-end vents on a Corvette, also known as axle vents, release pressurized air from the axle to prevent oil leaks and keep the axle in suitable working order, so it's important to keep the vents in good condition. CA rear-end vents are engineered to meet or exceed OEM specifications. They will efficiently maintain the performance of your seals, allowing pressure to escape and keeping contaminants out.
Not Yet Reviewed
$4.99
Keyser Manufacturing Crush Collars
Keyser Manufacturing crush collars are designed to compress as the pinion gear nut is tightened, maintaining pressure outward against the inner and outer pinion bearings. These steel sleeves are crushed upon final differential assembly and keep bearing pressure consistent in the bearing cups—ensuring proper gear setup. Order the collars recommended for your axle model application.
Not Yet Reviewed
$2.99
Cardone Remanufactured CV Drive Axles
Cardone remanufactured CV drive axles have neoprene boots ensuring excellent ozone resistance, which eliminates cracking, a leading cause of boot failure. Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing. High-quality grease withstands high-temperature and pressure extremes, which extends joint life. High-tech grinding machines maintain the original design of the outer housing, race, and cage to guarantee reliable performance. Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles. Their threads are chased to ensure proper fit when the axle nut is installed.
( 1 )
$38.50
—
$106.99
COMP Cams Hi-Tech Pushrods
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$17.95
Clearance
ATP Front Axle Disconnect Assemblies
ATP front axle disconnect assemblies save you time and money! Original gearbox units are prone to failure, and the time you spend searching for new or remanufactured units will be wasted, as complete assemblies are no longer available from the dealer. ATP front axle disconnect assemblies are all newly manufactured and thoroughly pre-lubricated with an excellent anti-wear and extreme-pressure performance grease. You could buy internal replacement parts and a housing—if available—at a big price, and then spend more of your time rebuilding, but why? ATP front axle disconnect assemblies eliminate the need for rebuilding and offer superior mechanical stability. If you repair 4x4 vehicles, you'll eventually need one of these ATP axle actuator assemblies. They're available in configurations for a variety of applications.
( 2 )
$122.99
$38.50
—
$548.99
Summit Bucks
Eaton Detroit Truetrac Differentials
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 506 )
$716.99
—
$859.99
