Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Differentials, Axles & Rear-End Parts
Showing In Stock Items. Show All 16 Items.
Scott Drake Rear-End Vent Hose Kits
Scott Drake rear-end vent hose kits allow the rear-end of your classic ride to breathe. Their vent hose kits run from the brake junction block up to the body and include attaching hardware.
( 4 )
$16.01
The Right Stuff Flex Hose Breather Bolts
The Right Stuff flex hose breather bolts are small, simple screw-in breathers designed to be used with your flex hose. They test all their products for endurance, compatibility, quality, and material consistency. Order The Right Stuff flex hose breather bolts for your differential vent application.
Not Yet Reviewed
$16.99
ARB Air Line Service Kits
ARB air line service kits—never adventure without them! These Air Locker air line trail repair kits are designed for a quick and easy fix while away from the shop. ARB air line trail service kits contain: * Two 5mm (blue air line) splice connector * 6.75 ft. of air line * Two air line support tubes * Two 5mm ferules * Bulkhead O-ring (seal housing)
( 1 )
$39.95
ARB Air Locker Replacement Parts
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 20 )
$39.95
Longacre Billet Rear-End Breather Kits
Do you need a convenient way to vent transmissions, rear-end differentials, and other components? These Longacre billet rear-end breather kits include a vent, hardware, and hose for a complete installation. They're easy to mount to tubing with their simple clamp-on design and no welding is required.
( 4 )
$61.99
Clearance
Spicer Drivetrain Products Axle Vent Bladder Kits
Spicer Drivetrain Products axle vent bladder kits protect your axle and the environment whether you are off-road or on the track. As oil and vapor expand in your carrier, the axle vent bladder captures any oil blow-out and returns it to the axle, delivering optimal protection for your vehicle. Spicer Drivetrain Products axle vent bladder kits also extend axle life and helps you avoid costly repairs caused by debris or water entering the axle or running the differential low on oil.
Not Yet Reviewed
$374.99
$90.50
Scott Drake Differential Vents
Scott Drake differential vents will replace your old vents and help your axle equalize atmospheric pressure, keeping excessive debris from contaminating the differential. These steel vents are strongly made for years of use; they screw into the threaded hole in the axle, while also securing the brake line and hose.
( 17 )
$19.46
Trail-Gear Creeper Breathers
Trail-Gear creeper breathers are designed to prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They will expand and contract to accommodate an increase or decrease in housing pressure. TG breather kits include one housing fitting, clamp, and bellow. Installation takes just a few minutes, with no hoses to route.
( 10 )
$39.99
Spicer Drivetrain Products Trac-Lok Differentials
Spicer Drivetrain Products Trac-Lok differentials provide improved traction capability without requiring switches, wires, sensors, air hoses, or manual input from the driver. During a slip event, they automatically send approximately three times more torque to the high-traction wheel end, then returns to normal wheel-end differentiation as conditions change in order to deliver maximum vehicle handling. Automatic engagement, enhanced traction, and lightweight, Spicer Trac-Lok differential carriers ensure unparalleled performance for your vehicle.
( 1 )
$715.99
—
$1,322.99
Currie Turn 9 Housing and Axle Packages
Currie Turn 9 hosing and axle packages are complete, ready to bolt-in assemblies built to match the vehicles stock axle width, pinion offset, suspension mounting locations, and wheel bolt pattern for a straightforward hassle-free installation. Included standard features: * Currie Turn 9 housing features high-strength fabricated 4130 chromoly steel center section with internal tube gussets and CNC-machined face flange, with 3 in. diameter chromoly axle tubes, all joined with strong, attractive welds to deliver superior strength and durability * Torque arm mount—fabricated, heavy-duty mount provides OEM fitment for compatibility with stock or aftermarket torque arms * Heavy-duty, laser-cut suspension brackets installed on the housing, matching the stock OE locations and fitment for a direct bolt-in fit * CNC-machined billet housing ends with provisions for internal or external axle oil seals * Currie Performance 31-spline 1541 alloy axles with tapered axle bearings * Bearing retainers assure positive bearing retention and full seal engagement Please note: These packages require a 9 in. third member assembly and compatible brake package to complete the rear-end, and will require assembly of components prior to installation.
Not Yet Reviewed
$1,900.00
Trail-Gear Tacoma Solid Axle Swap C Kits
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
On Sale
Artec Industries APEX Rear Axle Trusses
Artec Industries APEX rear axle trusses bring a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. Their key feature is their unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight (vs using a thicker material top) and eliminating long weld seams--which can be lead to extra weld warping of the axle, longer install times, and inconsistency. The peaked structure strengthens the area between the coil perches and over the differential forming a solid structure where its typically most weak. Artec APEX rear axle trusses are the epitome of low cost, easy and quick to weld, simple, strong, and complete solutions for making your factory Jeep axle take more abuse than originally intended. Additional features: * CNC precision laser cut in-house from 3/16 in. mild steel * CNC precision bent in-house for great fitment * Lightweight yet strong solution--less than 10 lbs. * Designed used 3D models directly from Dana Corp and Jeep * 70 percent less welding needed than previous truss designs--less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction, but rigidity and strength * Contours the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock axles * Clearance cuts for e-locker plug removal and axle breather hose * Low-profile design, tight to the differential, allows usage in vehicles with only slight lift
( 1 )
$131.99
—
$175.99
$105.59
—
$140.79
Trail-Gear Trail-Link 3-Link Tacoma Solid Axle Swap C Kits
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Dorman Differential Vents
We all respond to pressure in different ways. Dorman differential vents equalize the atmospheric pressure in your vehicle's differentials. Vents deteriorate over time and can often get clogged, requiring replacement. These Dorman vents are constructed from high-quality materials and are manufactured to strict engineering quality standards. Prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out with Dorman differential vents.
( 8 )
$7.99
