Availability
Detroit Speed offers a variety of differential bung fittings, such as drain plug and filler neck style bungs. These weld-in plumbing accessories are made of steel and are designed to factory specs to ensure proper fit and performance. Order the style and size needed for your application.
Not Yet Reviewed
$16.95
—
$21.95
Summit Bucks
ACDelco GM Genuine Parts multi-purpose threaded plugs are manufactured to be an exact replacement for your GM vehicle. GM original equipment parts give you peace of mind that the fit, form and function is of the highest standards. Get the same original equipment replacement parts from the same source as General Motors with ACDelco.
( 1 )
$10.99
If you have ever experienced a damaged line on the trail, you know how frustrating it can be. These special Trail-Gear air line repair fittings allow you to cut out the damaged section and splice the line in just seconds. Simply cut the line and push into the fitting. To remove the line from repair fitting, simply press in the lock collar and remove. A great item to keep in your toolbox! Designed to fit 5mm ARB air line.
Not Yet Reviewed
$29.99
Designed by WEHR Machining, these aluminum differential vents have an AN stem and nut to install easily into the existing differential or other gear-housing vent holes. They accept a 1/2 in. filter element.
( 1 )
$25.79
—
$35.99
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 17 )
$17.00
—
$31.00
ARB air line service kits—never adventure without them! These Air Locker air line trail repair kits are designed for a quick and easy fix while away from the shop. ARB air line trail service kits contain: * Two 5mm (blue air line) splice connector * 6.75 ft. of air line * Two air line support tubes * Two 5mm ferules * Bulkhead O-ring (seal housing)
( 1 )
$39.95
On Sale
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$14.99
—
$49.99
$12.74
—
$42.49
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$274.95
—
$789.95
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
—
$301.99
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
—
$2,799.95
Allstar Performance offers a selection of power steering reservoirs in lightweight aluminum for race vehicles. They have universal-fit tanks with baffle in the return fitting to prevent foaming and cavitation, as well as an economical version with no internal baffles. Both versions are available with or without mounting brackets. Allstar power steering reservoirs will meet your needs and your budget.
( 31 )
$89.99
ARB differential breather kits are important to vent air pressure in drivetrain assemblies, and they eliminate the shortcomings of your factory breathers—especially when driving through water crossings. ARB units are high-flow, zero backpressure, zero vacuum breather systems. Each features a high-flow air filter within a central manifold that will allow up to four drivetrain assemblies to be vented to one central location--ideally somewhere on the vehicle that will be above the water level at all times. ARB differential breather kits are intended to replace your factory breathers and contain enough fittings and tubing to connect at least two drivetrain assemblies. Additional features and benefits include: * Axle breather manifold is machined from billet aluminum and anodized, making it lightweight and resistant to the elements * The manifolds have four axle breather ports, allowing for 1-4 breather lines to be connected * Very compact design, allowing them to be installed in virtually any location * The kits come with self-tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 in.) bolt or stud, which is the common size in most vehicle engine bays * The air filters are the ARB compressor air filters, which are splash-resistant with washable high-flow sintered bronze filter cartridges * 8mm polyethylene tubing is flexible, oil-resistant, water-resistant, and heat-resistant * 8mm tubing has been selected over the standard 6mm tubing to improve the airflow and reduce the chance of oil blockages in long breather lines * 8mm push-in fittings make installation simple and fast * Kits include anodized aluminum manifold with 5 ports (breather lines and air filter) and 2 mounting holes, air filter assembly, fittings, plugs, polyethylene tubing, screws, and cable ties
( 3 )
$89.95
Trail-Gear creeper breathers are designed to prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They will expand and contract to accommodate an increase or decrease in housing pressure. TG breather kits include one housing fitting, clamp, and bellow. Installation takes just a few minutes, with no hoses to route.
( 10 )
$39.99
Trail-Gear Creeper Breather bellows prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They expand and contract to accommodate the increase or decrease in housing pressure. These TG replacements are made from flexible EVA copolymer plastic, just like the originals, and will fit onto 1/4 in. O.D. tube or barbed fitting (not included).
( 1 )
$16.99
PSC vent bellows allow your rear housing, transmission, transfer case, etc. to vent without losing fluids or letting contaminates in. They fit over any 1/4 in. tubing or barbed fitting. These are not for use on any steering system or reservoir.
( 4 )
$15.00
Tires perform best when they're set at a pressure that's appropriate for the terrain. While highway use calls for relatively high pressures, lowering air pressure will dramatically improve traction in a range of off-road environments. Equally beneficial is the ability to re-inflate tires, including tires that have been repaired; punctures aren't unusual in extreme off-road conditions. In such environments, the value of owning an air compressor is priceless. ARB Air Systems supplements its line of air compressors with complete vehicle-specific solutions for enthusiasts looking to equip their vehicles with compressors and accessories. The product range includes items such as air fittings, manifold kits, braided stainless steel PTFE hoses, forged aluminum air tanks, and air chuck mounting solutions. Together, these provide the necessary components to fit a complete air compressor system to a 4WD, allowing a vehicle to be outfitted front to back with on-demand air. ARB also offers a full range of replacement parts and compressor components along with a variety of tire inflators and inflation kits. When coupled with good-quality tire repair equipment, ARB air compressor components and accessories provide the off-road traveler with independence and peace of mind.
( 10 )
$101.00
RCV Performance axle snap rings are available for a variety of applications, including Polaris and select Can-Am vehicles. These axle snap rings serve as a crucial retaining mechanism, securing components like bearings and CV joints to the axle to prevent axial movement and help ensure proper function and longevity of the drivetrain. By fitting into a groove on the shaft or housing, the snap rings create a positive stop to ensure components stay in their intended position. This secure retention is vital for the smooth and reliable operation of the drivetrain to prevent issues like bearing failure or CV joint damage. Select the axle snap rings for your vehicle's application.
Not Yet Reviewed
$6.49
PEM Racing weld-in drain bungs are threaded fittings welded to a vessel, pipe, or other component, providing a permanent threaded port for attaching other fittings or plugs. They're essentially a pre-fabricated, threaded connection that can be welded to create a customized drain, fill, or access point. These bungs are machined from steel in accordance with factory specs to ensure proper fitment and performance. Each part meets or exceeds OE quality standards.
Not Yet Reviewed
$14.99
To service your boat engine yourself you will need some special tools. Sierra Marine lower unit fill tubes and kits can help. These flush and fill tools (standard or import) are for small gearcases requiring a 10 oz. tube of gear lube and include the appropriate lower unit fitting for specific applications. Sierra also offers the standard fill tube in a kit along with two 10 oz. tubes of gear lubricant. Choose the product(s) you need for your boat maintenance. Features of lubricant: * Recommended for all general marine applications requiring a GL-5 class lubricant * Ideal for replacing all old hypoid 90 application needs * Formulated for use in freshwater or saltwater conditions and all standard marine applications * Reduces friction and protects gears, bearings, and other gear case components * Amber color * 80W-90 weight
Not Yet Reviewed
$56.99
JOES Racing Products Micro Sprint rear axle nuts are small, but important fittings. Machined to exact tolerances from quality aluminum, they're anodized for durability and great long-lasting looks. JOES rear axle nuts are offered in both right and left-handed threads.
Not Yet Reviewed
$29.95
On Sale
More beef? You bet! Artec Industries adds even more muscle to your super-tough Dana 80 rear axle with their super-tough trusses. Precision CNC-cut and bent, these form-fitting trusses are built with 3/8 in. thick mild steel truss tops and 1/4 in. mild steel ram mounts and gussets to deliver maximum strength. You fly through the air, you land, the ground pushes up, and your truck pushes down---something has to give ... well, it won't be your Dana 80 axles reinforced with trusses from Artec Industries!
( 1 )
$419.99
$314.99
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$1,331.00
—
$3,114.00
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
