Availability
Spidertrax Off-Road's all-new 1480 40 spline front axle stubs are a reinvention of their already proven 35 spline stub shafts. Manufactured from billet 300M aerospace material with an integrated positive locking design—all while achieving 50 degrees of steering—they're the next best thing in stub shaft technology… and the last stub shafts you'll ever need. These 1480 40 spline stub shafts are designed to work with 60 style U-joints and Spidertrax 40 spline Ultimate Unit Bearings. * Aerospace Quality: Spidertrax follows the strictest AMS Aerospace standards for their heat treatment, complete with double tempering, snap tempering, and cryogenic treatment procedures. Parts are sampled to ensure proper grain structure is achieved up to 0.0003 in. from the surface; that's a depth 1/10 the thickness of a human hair! In summary, you're getting the best material and the best heat treatment on the market. * Locked: Turning 40 degrees is impressive, but Spidertrax axle shafts can turn 50 degrees. Engineers achieved this by positively locking the shaft to the Ultimate Unit Bearing with a billet aluminum cap and cap screw. Keeping that stub shaft tightly secured not only helps with driveline vibration, but helps with overall strength of shaft and U-joint. * 40 Splined: Each stub shaft is 40 splined—a size that makes perfect sense, especially when running properly paired inner axle shafts. When sized with the same shaft diameter as inner shafts, stub shafts end up taking the full punishment in your front-end. The stub shaft should be "stronger" than an inner axle because unlike an inner axle, stub shafts have little room to twist, making them more prone to failure. An added bonus: with many drivers running 40 splined rear Ultimate Unit Bearings, having the same unit bearing up front makes for better serviceability and part simplicity.
Not Yet Reviewed
$1,299.00
With Strange Pro Race custom axles, your set-up is optimized for drag racing! They're manufactured from Hy-Tuf, an ultra-strength alloy that—when combined with a thru-hardened heat-treat—achieves superior torsional strength and ductility. Strange Pro Race packages are available with bearing, studs, retainer plates, or eliminator kits. You can also get the axles alone to accommodate your application. For maximum torsional strength and winning performance, start your spec sheet with Strange Pro Race custom axles. Many Pro Race custom axles and packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Thru-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of lengths * Choice of bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 7 )
$594.99
—
$954.99
These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.
( 15 )
$243.00
—
$635.00
Got crazy horsepower? Then get these Moser Engineering Extreme alloy axles for your rocket. Capable of withstanding the most extreme horsepower levels, these axles are star- flanged, gun-drilled, 40-spline units manufactured from premium-quality alloy steel, forged from Moser's own tooling, induction heat-treated for optimal torsional strength, and then 100 percent magnafluxed. Extreme axles feature a 1.705 in. shaft size and oversized bearing seats of 1.774 in. They can be splined for any manufacturer's spool and come with a standard 10-year limited warranty. Complete the above instructions to collect the specs needed or call us for expert assistance. These axles are shipped directly from the supplier, so shipping times may vary. All Moser Engineering Extreme Axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, as each axle is custom and built to order. Prices may vary depending on chosen options. All custom order axles are Special Order and Non-Returnable.
Not Yet Reviewed
$666.00
—
$825.00
These NHRA and IHRA-accepted premium alloy C-clip axles from Moser Engineering are custom built specifically for your vehicle. Induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. Available with a press fit or screw in stud axle flange and choice of stud diameters. Studs not included. All Moser C-clip axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing. All custom order axles are Special Order and Non-Returnable.
( 6 )
$200.00
—
$390.00
RCV Performance custom ultimate CV axles replace your Ford Dana or GM Dana 60 U-joint axle shafts with a high-strength constant velocity design. Upgraded 300M CV axle options are also available. The kits are designed for custom length inners. These axles are just as tough at a straight angle as they are at extreme angles where U-joints are weakest. Ultimate CV axles also eliminate U-joint binding to allow smooth transfer power to the ground. Even if you have big tires and big power, there are no worries! Additional details: * Ultimate CV Axles are low maintenance and operate with a smoothness you can feel, whether off-road or on the street * Axle sets RCV-CVJ60-FP and RCV-CVJ60-GMP include 4340 right and left CV axle shafts with 300M inner race, 300M outer stubs, SST seals and installation tool, and RCV synthetic moly grease * Axle sets RCV-CVJ60M-FP and RCV-CVJ60M-GMP include 300M right and left CV axle shafts with 300M CVs, 300M outer stubs, SST seals and installation tool, and RCV synthetic moly grease * Black oxide coating is standard * The Ford Dana and GM Dana 60 CVs are able to accept a 35-spline inner axle
Not Yet Reviewed
$2,899.95
—
$4,195.95
RCV Performance custom Big Bell CV axles are the ultimate solution designed to fit 2005+ Ford F450 and F550 Super Duty applications, as well as big knuckles like the Reid Super Kingpin knuckles for Ford Super-60 unit bearings. The Big Bell CVs are RCV's 2.5 ton Rockwell CVs, but the outer stub is designed to fit directly to the large 32-spline 2005+ Ford Dana 60 "Super-60" unit bearing. This eliminates the need for a lock-out or drive flange, increasing strength and reliability. These kits are designed for custom axles. The Big Bell CV is able to accept a 40 or 47 spline inner axle.
Not Yet Reviewed
$4,195.95
—
$5,995.00
With Strange Pro Race custom axle and spool packages, your setup is optimized for drag racing! The axles are manufactured from Hy-Tuf, an ultra-strength alloy that, when combined with a through-hardened heat-treat, achieves superior torsional strength and ductility. Their lightweight steel spools are forged in the USA from premium steel and are lightened to maximize the strength-to-weight ratio. Strange Engineering offers many different Pro Race axle and spool packages with bearings, studs, retainer plates, and eliminator kits to accommodate your application. All of them provide quality components to complete your spec sheet with maximum torsional strength and winning performance. Many Pro Race custom axle and spool packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Through-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of spline count, lengths, and bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 2 )
$787.99
These Strange S/S axles are designed to meet the demanding bending loads of street use. They are manufactured by Strange from modified 1550 steel. After extensive research and testing, Strange determined that 1550 steel, in conjunction with specified percentages of additional elements, creates the basis for the strongest induction-hardened axles available. Call 1-800-230-3030 for more information.
( 5 )
$537.99
—
$784.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Strange Engineering has developed the iconic Ford 9 in. rear axle into an extensive line of parts and complete HD Pro aluminum custom order assemblies that take advantage of the strengths of the original, while improving on strength, performance, and flexibility. These axles consist of forged aluminum pinion supports, with a lightweight steel spool or clutch posi unit and your choice of gear ratio in a standard gear, fully assembled with yoke. The most popular rear-end around is the Ford 9 inch unit; it is used by restorers, street rodders, and racers alike, regardless of what brand of car they're restoring.
( 2 )
$1,717.99
—
$2,021.99
Strange custom Ford 9 in. Pro Iron center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled nodular iron case, posi-unit/spool, upgraded pinion support, S-Series yoke, and ring and pinion set. Specification will be required to complete order. Please call us at 1-800-230-3030 for further information.
( 1 )
$1,428.99
—
$1,694.99
Strange aluminum custom order dropship ultra center sections are all about performance. Strange Engineering has over 40 years of rear-end assembly experience depended upon by world champions from street to top fuel, so you know these units are designed to perform. Available in a variety of applications and setups for everyone, they are shipped fully assembled in protective transport cases. Requires gear ratio and axle spline before ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$2,498.99
—
$3,275.99
Moser Engineering kits eliminate the factory C-clip axle retention and provide a safety hub with sealed, press-on bearings. The kits are required when replacing factory C-clip axles with Moser custom alloy axles.
( 42 )
$105.00
—
$210.00
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$194.99
—
$384.99
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,594.99
—
$3,371.99
Strange Ford 9 in. S-Series center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled nodular iron case with a nodular posi-unit, Daytona iron pinion support, S-Series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 3 )
$1,474.99
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,648.99
—
$2,270.99
These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover
Not Yet Reviewed
$3,424.99
When you need strength for your custom axle job, Yukon Gear & Axle cut-to-fit axle shafts should be your choice. Built to last, these Yukon axles are offered in hardcore 4340 chromoly and 1541H alloy steel. Built to perform, they offer more strength than stock styles and come in your choice of cut-to-fit/cut-to-length designs. Choose quality-built strength for your application with Yukon Gear & Axle cut-to-fit axle shafts.
( 33 )
$171.99
—
$723.99
Allstar Performance axle housing ends are welded into 3/16 in. wall x 3 in. O.D. axle tubes when building a custom width housing or converting to larger axles. Ends feature a stepped design with a beveled welding flange to help position flange in tube for easier installation. Allstar Performance axle housing ends are available in large bearing Late/Torino style or Early Model style of Ford 9 in. housing ends. Choose the proper one for your application.
( 2 )
$106.95
—
$109.99
Moser Engineering replacement alloy axle shafts feature high-quality materials that can stand up to everyday use. They use the finest alloy for these replacement shafts, giving you a custom alloy shaft that has been induction heat-treated, 100 percent magna-fluxed, and has a hardened bearing seat for years of worry-free use. Available for passenger car, truck, and SUV applications, Moser Engineering replacement alloy axle shafts are the perfect fit for your vehicle.
( 57 )
$168.00
—
$499.00
Custom axles can be an expensive option for racers. Instead, consider Allstar Performance cut-to-fit flanged axles for your street, dragstrip, and Circle Track vehicles. Ideal for Ford 9 in. rear-ends, these carbon steel axle shafts have multiple wheel bolt patterns for 5 on 4 1/2 in., 4 3/4 in., and 5 in. bolt circles, and they're drilled for press-in style studs (sold separately). These axles are available in various lengths, with or without bearings. Select the bolt-in model designed for the best fitment on your application.
( 5 )
$199.99
—
$226.99
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 21 )
$8.99
—
$50.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
