Availability
Tires perform best when they're set at a pressure that's appropriate for the terrain. While highway use calls for relatively high pressures, lowering air pressure will dramatically improve traction in a range of off-road environments. Equally beneficial is the ability to re-inflate tires, including tires that have been repaired; punctures aren't unusual in extreme off-road conditions. In such environments, the value of owning an air compressor is priceless. ARB Air Systems supplements its line of air compressors with complete vehicle-specific solutions for enthusiasts looking to equip their vehicles with compressors and accessories. The product range includes items such as air fittings, manifold kits, braided stainless steel PTFE hoses, forged aluminum air tanks, and air chuck mounting solutions. Together, these provide the necessary components to fit a complete air compressor system to a 4WD, allowing a vehicle to be outfitted front to back with on-demand air. ARB also offers a full range of replacement parts and compressor components along with a variety of tire inflators and inflation kits. When coupled with good-quality tire repair equipment, ARB air compressor components and accessories provide the off-road traveler with independence and peace of mind.
( 10 )
$101.00
Air Lift offers replacement hardware kits for all of their systems. This assures you that, should the need arise to disassemble or reassemble your system, the correct service parts are available!
Not Yet Reviewed
$129.99
Manufacturer Rebate
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
—
$2,799.95
RideTech 1959-64 Chevy air suspension systems are designed specifically for the Chevy "B" Body cars. These kits provide an ultra-low show stance while maintaining excellent ride quality and handling. Choose the air suspension system recommended for your year/model. Some kits may vary depending on your application. RideTech 1959-64 Chevy air suspension system features and notes: * Upper StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Lower StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Front HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (also allows fine-tuning of the ride quality and handling) * Front and rear MuscleBars help reduce body roll and create room for wider tires. PosiLink end links provide immediate engagement between the chassis and control arms. * Rear StrongArms provide added strength to help get the power to the pavement * Rear CoolRide and HQ Series shocks simply bolt in place of the stock springs. Important note: Control system is not included. To complete your air suspension system, a RideTech compressor system is recommended. * RideTech kit 11060298 upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind; must be used with stock spindles. Some cars have two rear upper control arms and will need an additional StrongArm. (1959-64 GM B-Body includes Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood)
Not Yet Reviewed
$4,820.00
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 17 )
$8.00
—
$119.00
ARB air line service kits—never adventure without them! These Air Locker air line trail repair kits are designed for a quick and easy fix while away from the shop. ARB air line trail service kits contain: * Two 5mm (blue air line) splice connector * 6.75 ft. of air line * Two air line support tubes * Two 5mm ferules * Bulkhead O-ring (seal housing)
( 1 )
$39.95
RideTech 1958 Chevrolet air suspension systems are specifically designed for the 1958 Chevy B-body cars (including the Impala, Del Ray, Bel Air, Biscayne, Brookwood, and Nomad). They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These kits contain front upper and lower StrongArms, front and rear MuscleBars, plus front and rear HQ Series coilovers. Enjoy the benefits of buying a complete system that takes all of the guesswork out of your suspension upgrade. Features, items, and specs: * Must be used with 1959-64 stock spindles and disc brakes * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * HQ Series shocks allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001-mile warranty (rebound knob located on top of shock for underhood access) * CoolTide system using Firestone air springs * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement (includes a tubular upper wishbone specific to the 1958 model year)
Not Yet Reviewed
$4,680.00
Banks Ram-Air differential cover are unlike any others. After testing covers with flat-backs and those with larger fluid capacities, it was apparent that those covers do not cool as well as advertised and suffer from poor fluid dynamics. As a result, flat-backs reduce fuel economy. Banks Ram-Air differential cover extends lubrication life and retains fuel economy! Features: * A380 aircraft aluminum diecast for exceptional strength and precise fit * 12-point chrome plated flanged mounting bolts * 24 external radiator fins offer 534 sq. in. of surface area to ensure optimal heat rejection * Ram-Air system directs cool high-velocity air through radiator fins, eliminating the dead zone * Designed with breakaway scoops * Magnetic fill plug with 20 degree angle for easy fill--simplifies oil changes * Sight-glass with contrast screen and Viton® O-ring seal * Recessed magnetic drain plug simplifies oil changes
( 35 )
$375.00
—
$425.00
Air Locker offers cross shaft fasteners for a variety of differentials. These kits contain the four retaining pins that hold the cross shafts into the locker housing. The fasteners are machined from steel with a natural finish, and designed from factory specs to ensure proper fit and long-lasting performance. Order the kit recommended for your axle application.
Not Yet Reviewed
$25.00
ARB Air Locker seal housing O-rings are designed to fit dozens of ARB locking differentials. These replacement O-rings help keep your air locker sealed and working properly. Maintain, optimize, or upgrade your locking differential with factory-style housing O-rings, available in pairs or kits.
Not Yet Reviewed
$14.00
—
$17.00
ARB retaining clips are used in Air Lockers and other differential rebuilds, serving as a critical component within the seal housing to secure the seal itself and help prevent air leaks during operation. They are spare parts for the ARB Air Locker, a popular off-road accessory that provides improved traction by locking the differential. * What the retaining clips do: -- Secures the seal: The primary function of the retaining clips is to hold the bonded seal in place within the seal housing of the air locker. -- Prevents leaks: By holding the seal firmly, the clips help maintain the seal's integrity and prevent air from escaping the air chamber, which would cause the locker to lose its locking function.
Not Yet Reviewed
$17.00
Keep the air flowing with Trail-Gear replacement air lines. These 5mm nylon lines are made by ARB for TG and are perfect to use with Air Lockers or the Trail-Gear rear disconnects.
Not Yet Reviewed
$44.99
If you have ever experienced a damaged line on the trail, you know how frustrating it can be. These special Trail-Gear air line repair fittings allow you to cut out the damaged section and splice the line in just seconds. Simply cut the line and push into the fitting. To remove the line from repair fitting, simply press in the lock collar and remove. A great item to keep in your toolbox! Designed to fit 5mm ARB air line.
Not Yet Reviewed
$29.99
Cardone new air struts are built on decades of experience and have been meticulously designed and tested to match OE performance standards. Supplied with new shocks, bump stops, rings and high grade seals, each unit is engineered to restore your suspension to OE performance levels. And, as a direct-fit component, the new Cardone air struts are guaranteed to fit and function like the originals to offer quality and peace of mind that both you and your vehicle can rely on. Order the Cardone new air strut model that is best suited to fit your specific application requirements.
Not Yet Reviewed
$37.99
—
$89.99
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
Ensure optimal performance and prevent leaks with ARB differential seal kits. These drivetrain components are what you need for a successful drivetrain rebuilding. Order the kit designed for your application needs.
Not Yet Reviewed
$129.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,850.00
—
$6,100.00
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$7.99
—
$46.99
Need traction? Zip! You've got it with Yukon Gear & Axle Zip lockers! With on-demand traction, these lockers offer an air-operated design that allows you to switch from an open differential to 100 percent lockup when you need it. Theses Yukon Zip lockers are the ultimate in driver selectability for the right traction, on-road and off. Built from forged cases with 4320 chromoly internals for added strength, they work with a variety of air-delivery systems and are assembled in the USA. Do you need gripping power--now? You have the control with Yukon Gear & Axle Zip lockers.
( 1 )
$1,130.99
—
$1,571.99
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$2,461.85
—
$2,722.67
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$2,577.77
—
$2,987.69
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,229.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$4,029.99
—
$6,462.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
