Availability
Showing In Stock Items. Show All 88 Items.
PEM Racing's Ford 9 in. center housings are designed to provide a robust and durable foundation for high-performance rear-end applications, particularly in racing and modified vehicles. These housings are engineered to withstand the stresses of increased horsepower and torque, offering a stronger and more reliable base for the 9-inch differential. The PEM Racing HNF9 center housings are designed as an OEM replacement but also allows for customization with various axle tubes and carriers. This flexibility allows users to tailor their rear-end setup to specific needs and applications.
Not Yet Reviewed
$264.99
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,930.00
Moser Engineering offers third member hardware kits that contain all the necessary studs, washers, and nut hardware to mount the center section to your rear axle assembly housing. The hardware is made from the highest quality materials to provide outstanding durability and long-lasting service.
( 3 )
$27.50
Strange offers their rear axle housings in a variety of configurations, from just the center housing to complete, ready-to-bolt-in assemblies. The axle housings are designed and manufactured to be more rigid and stronger than OEM housings. Depending on the application, they're fabricated from proprietary nodular iron (substantially stronger than cast iron) and other quality materials—then fixture-welded to ensure proper alignment; slotted for full tube engagement; and reinforced at critical areas to reduce center section and axle tube flex. Whether your car is headed for the street, the track, or the drag strip, customize the rear-end with a Strange rear axle housing so it will meet or exceed your expectations.
Not Yet Reviewed
$334.99
—
$794.99
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
—
$1,599.99
Summit Racing™ 9 in. Ford Grand National rear-end assemblies are a good choice for your Circle Track race car. Offering quality-built performance at competitive pricing, our Summit Racing™ rear-end assemblies will keep you circling with the big boys without empting your wallet. These full-floating 9 in. Ford Grand National assemblies offer safety on the track and are delivered with a floater housing, lightweight hubs, rotors, solid axles built from 8620 heat-treated steel, bearing seals, rotor bolts, and lug nuts. Assemblies come with new stamped centers manufactured in the USA and are available with 28 or 31-spline solid axles. Axle tubes are turned for the easy installation of birdcages and suspension mounts. And, just like the big boys, the axle caps are red and etched with the Summit Racing™ logo. Do you need a little more grip in the corners? Or, maybe you got a little too chummy with the wall? No matter the reason, you've chosen wisely--Summit Racing™ 9 in. Ford Grand National rear-end assemblies.
( 1 )
$1,593.97
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,175.00
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
Allstar Performance Ford 9 in. housing studs are installed into the housing and pulled through a nut to provide a pressed fit. Their main purpose is to secure the center section into the housing and keep it that way. T-bolt style fasteners are also offered to secure brake backing plates and brackets to Ford 9 in. late model Torino housing ends. Allstar's housing studs are made from strong steel and have a black oxide finish to deter rust and corrosion.
( 3 )
$26.99
—
$29.99
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,175.00
The Driveshaft Shop introduces Level 6 1400 hp axles for the 2010-14 Camaro V8. They've designed a new one-piece outer CV for the application that is not only stronger but more cost-effective to manufacture. This saves you money without sacrificing durability! These direct bolt-in axles feature CNC rolled splines for extra strength. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use)—30 spline, like the Viper T56 and any upgraded T56. If the cages are stronger, the bars need to be also. The Driveshaft Shop has also included their certified 4340AQ cages REM polished with a re-designed radius on the cage window. Cages are full 4340, not the standard material that has been carbonized and made brittle.
Not Yet Reviewed
$1,024.98
—
$1,174.48
Quicksilver Q4 propellers provide outstanding hole shot, mid-range performance, and superior handling on high-horsepower walley boats, center consoles, and stern drive runabouts. The Q4 features four stainless steel blades, available in both left- and right-hand rotations. Additional details: * Works great on high-horsepower applications, heavy boats, and pontoon boats * Provides exceptional hull lift * Great for outboards and sterndrives * Crosses over to Mercury Revolution 4 * Equipped with PVS (Performance Vent System)
Not Yet Reviewed
$604.54
—
$817.87
Trail-Gear Creeper flanges offer more trail strength than your factory drive flanges. They are manufactured from hardened 4340 chromoly tool steel and feature a larger center section with more support for the splines. The kits include flanges, dust covers, cover O-rings for a waterproof seal, a drill bit, and heavy-duty studs. The additional studs share the load, preventing hub stud and bolt failures common to stock drive flanges and hubs. Get your rig trail-ready with Creeper flanges from Trail-Gear.
( 2 )
$179.99
These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.
Not Yet Reviewed
$524.98
—
$1,770.69
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
Moser Engineering provides industry-leading components to make upgrades to your vehicle, including these differential pinion support shims. They install between the pinion support and center section for pinion depth adjustments. Precision-machined from steel, the shims are tailored for each individual application to ensure the correct spacing adjustment for your setup.
Not Yet Reviewed
$45.00
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$999.99
—
$1,169.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Trail-Gear differential stud eliminator kits are the perfect solution for replacing stock axle housing studs that may be pulling loose—resulting in oil leaking from the center of the axle housing. No more do you have to tap and drill the studs out and replace the studs. These kits have been designed to replace the studs with Allen headbolts that won't pull out like the stock studs. The kits come complete with 10 high-strength steel stud fasteners, nuts, washers, and a tube of Ultra Gray Silicon gasket material.
( 2 )
$39.99
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
These Level 2 axles from The Driveshaft Shop are great for the fast street car that hits the track on the weekends. These full chromoly axles are designed with fast forced induction street cars in mind (not for all motor cars). They are fully assemble direct bolt-in's with torsional center bars, special inner cv's with oversized tripods, a higher durometer boot and outer cv designed to handle the launch. So, if you're looking for axles that will handle everyday driving and be able to handle the track as well, these are it!
( 1 )
$562.39
—
$724.98
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
