Availability
Showing In Stock Items. Show All 79 Items.
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
$4,704.69
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$514.99
—
$932.99
$463.49
—
$839.69
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,129.99
—
$1,802.99
$1,016.99
—
$1,622.69
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$293.65
—
$532.95
$219.95
—
$478.95
On Sale
Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
$247.49
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 99 )
$188.99
$170.09
On Sale
Mr. Gasket's chrome differential covers are the perfect addition to your axle. They're made of heavy-gauge steel for durability and excellent gasket sealing. The covers all get a high-luster chrome finish and include a gasket and mounting bolts.
( 14 )
$75.65
—
$87.15
$47.93
—
$74.85
On Sale
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$354.99
—
$428.99
$319.49
—
$386.09
On Sale
Artec Industries patent pending 14-bolt rear Apex short axle trusses feature a stronger design, lighter weight and are much easier to install. The key feature that sets them apart from the other brands is their unique peaked-shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous truss versions with long weld seams can lead to extra weld warping of the axle, longer install times and can be inconsistent. Without long seams to weld, the 14-bolt rear Apex short axle trusses can be dropped directly on to the axle, and then these trusses can be welded to the axle faster. Additional part features: * Designed using 3-D models directly from Ford and Jeep for an amazing fit and clearance with surrounding components * CNC precision-cut in-house from 3/16 in. mild steel for a lightweight yet strong solution * Patent pending Apex peaked top design provides more rigidity than a flat top truss design * CNC precision bent in-house for a great fitment * Installation is simple; literally drop the truss in place on the axle and it's ready to weld, no puzzle piece assembling * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Truss is low-profile allowing link joints to be mounted with ideal geometry—about 9 in. from the axle centerline * Truss is designed to fit in between leaf springs or can be used as a base for mounting link suspension mounts * 2-piece design means smaller packaging and less shipping costs along with easy installation Important note: Requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Some grinding and fitment may be required when installing this item. Every axle varies slightly, and some fabrication may be required.
( 1 )
$219.99
$197.99
On Sale
Auburn Gear pinion shaft service kits supply you with a new steel crosspin shaft and bolt. Maintain the performance of your Auburn Gear differentials with the correct service kits that offer the proper fit and function for your application.
( 3 )
$38.99
—
$166.99
$35.09
—
$150.29
On Sale
Artec Industries AAM 9.25 lower axle trusses reinforce your entire front axle. Pairing heavy engines and stock axles isn't a great tandem for handling abuse. Artec trusses are CNC-cut and designed to add some beef—providing maximum up-travel with virtually no loss of ground clearance under your differential. No axles are unbreakable; but with the added muscle of Artec Industries AAM 9.25 lower axle trusses they'll have the needed strength to survive. Features include: * Built from 1/4 in. thick mild steel * Bottom triangle shape provides an increased structural rigidity and helps axle skid over obstacles better * Truss spans entire length of axle for complete reinforcement of the axle tubes * Includes upper inner C-gussets for total axle reinforcement * Comes in six separate pieces for compact shipping and easier installation
Not Yet Reviewed
$309.99
$278.99
On Sale
Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.
Not Yet Reviewed
$131.99
$118.79
On Sale
Everyone has different needs for their truck. One of the most dramatic changes you can make to a vehicle are the rear ring and pinion gears. Whether you are going for aggressive low-end response for performance and towing, looking to make your truck a highway cruiser, or you've made a change to your wheel and tire size, Hurst ring and pinion sets are available to assist with the transformation. They offer gear sets ranging from 3.08 to 4.56 for the GM 12-bolt rear ends to get you exactly where you need to be. Hurst sets feature high-grade steel for strength and durability along with a gear tooth finish that reduces friction and heat for longevity.
Not Yet Reviewed
$332.95
$183.95
On Sale
Artec Hardcore performance differential covers offer unparalleled strength, performance, and durability for extreme off-road conditions. Made from thick-walled, high-strength nodular steel with a durable powdercoat finish, they provide easy installation and protection for your lockers, gears, and axles from the toughest hits. The covers include a magnetic drain plug for easy maintenance and steel fasteners for easy installation. Artec Hardcore differential covers feature CNC-machined steel components, and each one is engineered using 3-D scan files, ensuring a perfect fit. Select the cover designed for your front or rear axle.
Not Yet Reviewed
$185.99
—
$210.99
$167.39
—
$189.89
On Sale
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
$287.99
On Sale
Auburn Gear offers a variety of differential carrier replacement parts—including these Select-A-Loc service kits. From coil assemblies to coil bearings, the kits are available in several models for repair or rebuild projects on nearly a dozen axle model applications.
Not Yet Reviewed
$136.99
—
$184.99
$123.29
—
$166.49
On Sale
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$369.99
—
$429.99
$332.99
—
$386.99
On Sale
Make your animal of an axle even better with Artec Industries AAM 11.5 rear axle trusses. These heavy-duty truss systems reinforce your American Axle Manufacturing axle to take on serious abuse, while also providing a flat surface to mount your upper links. The 3/8 in. thick truss top and 1/4 in. thick gussets incorporate a unique design to strengthen both the axle and the link mounting surface. Artec trusses feature a low-profile so your link joints can be mounted with the ideal geometry, and they allow for a selection of pinion angles. Support your AAM 11.5 rear axle with Artec Industries trusses.
Not Yet Reviewed
$399.99
$359.99
On Sale
Artec Industries JK APEX front axle ultimate armor kits furnish everything you need to make your axle the strongest it can be. These packages include an APEX front axle truss, heavy-duty front LCA brackets, heavy-duty shock brackets, inner C-gussets, and APEX heavy-duty tracbar bracket. Armor kits are available for a variety of specific Jeep applications, in both stock and raised track bar height models. How is the ultimate armor kit better than the regular armor kit? This kit includes entire replacement LCA brackets and shock brackets, whereas the regular armor kit just adds a skid plate to the factory LCA brackets. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA brackets, shock brackets, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Gussets and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$417.99
—
$439.99
$376.19
—
$395.99
On Sale
Artec Industries JK APEX front axle trusses introduce a whole new level of cost savings, strength, weight savings, simplicity of installation, precision fitment, and complete axle protection never before seen in the industry. The key feature that sets the APEX truss apart is its unique peaked shape top which provides extra rigidity to the whole truss, while allowing both a reduction in weight (vs. using a thicker material top) and eliminating long weld seams. Previous versions with long weld seams have led to extra weld warping of the axle, longer install times, and can be inconsistent. This peaked structure not only applies to the axle tube between the coil perches, but extends underneath the coil perches as well—forming a complete truss from end to end of the axle, an industry first in an OEM axle application. The JK APEX truss has been tested and proved to hold up to both extreme applications and daily driving. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
$96.72
On Sale
When you've exceeded he limits of your Dodge 60 front axles, Artec Industries has the solution--heavy-duty trusses. Built from 3/8 in. thick mild steel truss tops with 1/4 in. mild steel ram mounts and gussets, these trusses are precision CNC-cut and bent for maximum strength. They are low-profile and span the entire length of your axle for complete reinforcement. Larger tires and aggressive driving ... maybe it's time to support your Dodge 60 front axles with trusses from Artec Industries.
Not Yet Reviewed
$359.99
$323.99
On Sale
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$120.99
—
$324.99
$108.89
—
$292.49
On Sale
What is your suspension built on? Artec Industries 8.8 in. modular axle trusses provide the supportive framework and a good foundation for success. Manufactured from precision CNC-cut and bent 1/4 in. mild steel and reinforced with interlocking 1/4 in. thick gussets, these 8.8 in. trusses beef up your axles and the link mounting surface for maximum strength. They have a low-profile design, allowing link joints to be mounted with ideal geometry—and they're shorter, so you can mate them with factory or Artec leaf spring perches. Trusses include trim-to-fit bridges that tie into a flange off the pinion of the axle and fortify the might of the whole truss. Build a system designed to take serious abuse; start with 8.8 in. modular axle trusses from Artec Industries.
( 5 )
$259.99
$233.99
On Sale
Sterling 10.25 rear axles are beefy and super-reliable--Artec Industries trusses will make them even better! Built with 3/8 in. thick steel truss tops and 1/4 in. thick gussets, the trusses incorporate a unique design to strengthen both your axle and your link mounting surface. Larger tires and your aggressive style of four-wheeling can take a toll on your Sterling 10.25 rear axles. Make them better than ever with trusses from Artec Industries.
( 4 )
$219.99
—
$419.99
$197.99
—
$377.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
