Availability
Showing In Stock Items. Show All 16 Items.
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
$4,704.69
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,415.99
—
$1,444.99
$1,274.39
—
$1,300.49
On Sale
Make your animal of an axle even better with Artec Industries AAM 11.5 rear axle trusses. These heavy-duty truss systems reinforce your American Axle Manufacturing axle to take on serious abuse, while also providing a flat surface to mount your upper links. The 3/8 in. thick truss top and 1/4 in. thick gussets incorporate a unique design to strengthen both the axle and the link mounting surface. Artec trusses feature a low-profile so your link joints can be mounted with the ideal geometry, and they allow for a selection of pinion angles. Support your AAM 11.5 rear axle with Artec Industries trusses.
Not Yet Reviewed
$399.99
$359.99
On Sale
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$379.99
$341.99
On Sale
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,499.99
$7,819.99
—
$9,309.99
On Sale
Artec Industries Ford 60 front hydro ram mount and axle trusses deliver strength and protection. One of the most vital and expensive components of your vehicle is your steering. These unique Artec trusses place your ram in its most affective and strongest location--close to the axle centerline--and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end on the axle tube, providing not only a location for mounting your 3 and 4-links, but they also create true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Ford 60 front hydro ram mount and axle trusses. Other features: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which also further protects your ram from trail damage * Ram mount and gussets feature drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow for easy removal of gears. Skid plate is bolted using included countersunk bolts, which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Includes additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$749.99
$674.99
On Sale
More beef? You bet! Artec Industries adds even more muscle to your super-tough Dana 80 rear axle with their super-tough trusses. Precision CNC-cut and bent, these form-fitting trusses are built with 3/8 in. thick mild steel truss tops and 1/4 in. mild steel ram mounts and gussets to deliver maximum strength. You fly through the air, you land, the ground pushes up, and your truck pushes down---something has to give ... well, it won't be your Dana 80 axles reinforced with trusses from Artec Industries!
( 1 )
$419.99
$377.99
On Sale
Sterling 10.25 rear axles are beefy and super-reliable--Artec Industries trusses will make them even better! Built with 3/8 in. thick steel truss tops and 1/4 in. thick gussets, the trusses incorporate a unique design to strengthen both your axle and your link mounting surface. Larger tires and your aggressive style of four-wheeling can take a toll on your Sterling 10.25 rear axles. Make them better than ever with trusses from Artec Industries.
( 4 )
$419.99
$377.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
