Availability
Showing In Stock Items. Show All 44 Items.
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,930.00
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
—
$1,599.99
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,175.00
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,175.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$999.99
—
$1,169.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Competition Engineering one-piece fabricated rear axle housings are CAD-designed and CNC-machined to be stronger and lighter than other styles. Their triangulated design provides the structural integrity required for racing. Made from chromoly or mild steel, the outer shell is 1/8 in. thick, and the faceplate is 1/4 in. thick. Configured for a 9 in. Ford, the housings come in either full-bodied car style, with cut-to-length 3 in. O.D. x .250 in. wall axle tubes, or dragster style, with big Ford forged housing ends aligned with the center section. The full style has an overall width of 60.75 in., the dragster style is 27.6 in. wide, and the faceplate accepts 3/8 in. studs. A drain plug, filler plug, and breather bung are included.
( 1 )
$840.99
—
$997.99
Need reinforcement? Artec Industries Ford 9 in. rear axle trusses support and strengthen your rig's rear-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. They're able to nearly fit any 9 in. housing--whether slightly offset or centered, the fit is still universal. Simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle for complete fortification. Artec Industries trusses bolster your Ford 9 in. rear axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$229.99
Stock rear-ends are typically built with a non-floating design--and because your wheels are bolted to the axle, if the C-clip fastener or axle happens to break, you could lose a wheel. By contrast, Allstar Performance 9 in. floater housing kits are a safer and more versatile replacement option. These steel stock housings are available in a variety of widths, centered or offset. They're jig-welded for proper alignment and feature a differential center section and wall axle tubes with spindle pins, plus gear case mounting studs and fill and drain plugs. (Depending on the kit you order, additional components may be included.) Select the size needed for your application, and then improve your axle setup with a floater housing kit from Allstar Performance.
Not Yet Reviewed
$499.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
—
$7,750.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
PEM Racing introduces its newest and strongest quick-change rear-end, the black MAX Dirt late-model 1-ton aluminum housing. The 8-rib side bells and 1-ton tubes have been tested to have less flex. These quick-change rears have lower rotating friction and will disperse heat better. They're available for Rocket XR1 and Longhorn Circle Track chassis. Additional details: * Thermal coated black outside of bells and center housing * REM finishing of ring and pinion, bearings and races for reduced friction and heat * Drilled aluminum spool for reduced rotating weight * Black anodized aluminum one-ton tubes T6061 with 1-ton snout nuts * New PEM 8-rib side bells (stronger and less flex) * Magnesium / aluminum alloy castings * Drilled aluminum spool * Gun-drilled heat-treated lower shaft * Roller pinion nose bearing * Posi locking nut on pinion * Forged steel 1310 yoke * Vent tube * Steel core cover gasket * 5 longer thru-bolts for suspension component attachment
Not Yet Reviewed
$2,765.99
PEM Racing's Ford 9 in. Grand National rear-end assemblies are used for their strength and durability, particularly in racing applications like circle track racing and high-performance street cars. Chosen for their ability to handle high horsepower and extreme cornering forces, the 9-inch design features a full-floating axle, meaning axles are not attached to the housing and instead carry the load independently, offering enhanced safety and reliability compared to traditional axles. The removable center section of the 9-inch rear-end allows for easy gear ratio changes, making it a convenient choice for racers who need to experiment with different gear combinations.
Not Yet Reviewed
$1,159.99
These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.
Not Yet Reviewed
$779.98
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$3,599.99
—
$5,082.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$4,599.99
Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$4,299.99
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 52 )
$318.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
