Filters
Currie 9-inch third members are designed to fit Ford 9-inch applications. The case is made from nodular iron and installed is a Currie TwinTrac® posi differential in 31 spline, or Eaton TrueTrac differential in the 35 spline options. All Currie third members include a big bearing "Daytona" pinion support, are fully assembled, and delivered ready to install.
( 3 )
$1,400.00
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
Not Yet Reviewed
$1,099.95
—
$1,599.95
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 480 )
$1,049.99
—
$1,249.99
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 3 )
$1,256.51
—
$1,599.89
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 79 )
$1,025.99
—
$1,499.99
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 127 )
$1,003.42
—
$1,564.89
Ford Performance Parts 8.8 in. IRS loaded differential housings are improvements to the rear axle of your Mustang. Whether you're replacing the original in your manual or strengthening the cast aluminum model in your automatic, there's nothing better than Ford Performance differential housings to do the job perfectly. Besides, who knows your Mustang better than the maker? These 8.8 in. IRS housings are fully loaded with forged, and CNC-cut gear sets installed. They feature strong cast iron topped with an aluminum differential cover, and, depending on the application chosen, a Torsen or Traction-Lok differential is included. If your automatic sees a lot of track time or your manual has a broken housing, your only choice should be genuine Ford Performance 8.8 in. IRS loaded differential housings.
( 3 )
$1,189.99
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,113.95
—
$1,407.95
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 11 )
$1,239.99
—
$1,607.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,250.00
—
$1,600.00
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,136.99
—
$1,556.99
Yukon Gear & Axle Grizzly lockers offer fierce power! These robust lockers are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Grizzly lockers feature forged cases with 8620 internals and a patent-pending internal locking mechanism for maximum strength. Assembled in the USA, these lockers will provide 100 percent power to both your tires, while still allowing for disengagement while negotiating turns. Whether your application is for the street, off-road, or drag racing, Yukon Gear & Axle Grizzly lockers will have your rig roaring with performance.
( 22 )
$1,025.89
—
$1,456.99
Spidertrax Off-Road's all-new 1480 40 spline front axle stubs are a reinvention of their already proven 35 spline stub shafts. Manufactured from billet 300M aerospace material with an integrated positive locking design—all while achieving 50 degrees of steering—they're the next best thing in stub shaft technology… and the last stub shafts you'll ever need. These 1480 40 spline stub shafts are designed to work with 60 style U-joints and Spidertrax 40 spline Ultimate Unit Bearings. * Aerospace Quality: Spidertrax follows the strictest AMS Aerospace standards for their heat treatment, complete with double tempering, snap tempering, and cryogenic treatment procedures. Parts are sampled to ensure proper grain structure is achieved up to 0.0003 in. from the surface; that's a depth 1/10 the thickness of a human hair! In summary, you're getting the best material and the best heat treatment on the market. * Locked: Turning 40 degrees is impressive, but Spidertrax axle shafts can turn 50 degrees. Engineers achieved this by positively locking the shaft to the Ultimate Unit Bearing with a billet aluminum cap and cap screw. Keeping that stub shaft tightly secured not only helps with driveline vibration, but helps with overall strength of shaft and U-joint. * 40 Splined: Each stub shaft is 40 splined—a size that makes perfect sense, especially when running properly paired inner axle shafts. When sized with the same shaft diameter as inner shafts, stub shafts end up taking the full punishment in your front-end. The stub shaft should be "stronger" than an inner axle because unlike an inner axle, stub shafts have little room to twist, making them more prone to failure. An added bonus: with many drivers running 40 splined rear Ultimate Unit Bearings, having the same unit bearing up front makes for better serviceability and part simplicity.
Not Yet Reviewed
$1,099.00
Yukon Gear & Axle muscle car limited slip and re-gear kits dramatically improve traction and durability by adding a Yukon LSD and an upgraded ring and pinion set to your differential. They also provide an opportunity to generate next-level acceleration by moving to a more aggressive gear ratio. Each kit will include posi-traction unit, ring and pinion gear set, and all required bearings and installation hardware. Select the kit designed for your muscle car.
Not Yet Reviewed
$1,260.89
—
$1,355.89
GForce Renegade axle shafts offer big league strength and performance at a fair price point. They're direct replacements for your factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. CNC-machined from proprietary aerospace billet alloy, Renegade axles feature upgraded spline counts on the axle bar and CV joints—providing more engagement. This allows for larger diameter bars equaling more strength, as well as more travel and increased operating angle over OEM CV joints. GForce Renegade axle shafts are a leap above entry-level, with hand-built assemblies utilizing premium materials and carefully controlled processes. Order the pair recommended for your vehicle application. Features include: * Anti-wheel hop technology—significant reduction during hard launches * Direct bolt-in fit and finish * 31-spline severe-duty CVs * Stronger one-piece CNC-machined inner and outer stubs * Powdercoated axles for corrosion protection * Black E-coat finish on inner and outer stubs to protect against harsh conditions, without impeding spline engagement
( 4 )
$1,199.00
Ford Performance Parts Torsen differentials use a worm gear friction system that will not wear out like conventional clutch-type positive traction differentials. These differentials ensure your engine's power is transferred to the wheels with the maximum traction. The unique torque-sensing ability of the Torsen design, and the smooth engagement of Torsen-style limited-slip differentials, make them the perfect choice for your street, strip, or off-road vehicle.
( 6 )
$1,105.99
Spidertrax Off-Road Spider 9 axle housings step up the level of performance and looks of today's off-road machines. Building on the platform of the company's top placing housings, the latest Spider 9 housing is stronger (ARP studs, accepts 9 in. and 10 in. gears), more versatile (68 in. OAL, works with standard and mid-engine setups), and just downright sexier (TIG-welded on outside, machined face). If you're looking for many of the 9 in. housing benefits, at a fraction of the price, Spider 9 housings are the perfect solution. Every Spider 9 housing comes with third member ARP studs and Nylocks. Fill bungs and caps are sold separately. Additional details: * Strong: Every Spider 9 housing is constructed with a one-piece 1/4 in. thick shell, a 3/8 in. thick face plate, and 3 1/2 in. x 1/4 in. wall axle tubes. Spidertrax also redesigned the faceplate to allow the use of both 9 in. and 10 in. gears. * Secure: Best to keep those 9 in. and 10 in. gears where they belong, inside your Spider 9 housing. That's why Spidertrax redesigned the shell to work with ARP studs. No matter how many miles, your third member will always stay tight. * Complete: All Spider 9 housings are precision-machined for genuine ARP third member studs, included with every order. Plus, at 68 in. in length, these off-the-shelf housings work for almost any off-road application. One housing, everything you need.
Not Yet Reviewed
$1,099.00
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 55 )
$1,091.99
—
$1,597.99
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 7 )
$1,002.99
—
$1,711.99
Finding the right differential is often an experiment in compromise--spools, lockers, and limited-slips all have their pros and cons. Strange S-Trac differentials use helical gears for optimum strength while retaining smooth operation similar to a posi. Unlike standard limited-slips, there are no cones, springs, or clutches to wear out; the preloaded 35-spline unit's helical gears are constantly adjusting to the conditions, resulting in positive traction even around turns. Under normal conditions they operate like an open differential, but once slippage occurs a force is created between the pinion and side gears which generate friction, slowing the spinning tire and sending power to the one with the most traction. When power is applied, it wedges all the gears together so the wheels will spin in unison. Their surefire grip is especially useful on curves and corners where both tires receive power, as the inner differentiating allows the racer to hit the throttle midway through the corner and set up for the straightaway. The case halves and internal gears of these S-Tracs use high-rated case-hardened steel--with multiple massive pinion gears to control differential action (6 with Dana 60, STR-D3523; 12 with Ford 9 in., STR-N1980). These differentials do not influence vehicle steering, and have no perceived backlash. No special friction modifiers or additives are required. Whether using your vehicle for street/strip, autocross, road racing, circle track, or off-road, Strange S-Trac differentials will pull you through.
Not Yet Reviewed
$1,094.99
—
$1,428.99
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 12 )
$1,027.89
—
$1,499.89
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,085.99
—
$1,699.99
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,320.04
—
$1,548.89
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 3 )
$1,005.99
—
$1,446.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
