Filters
Warn's premium manual hubs feature a no-compromise design for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. Their all-metal construction and ZA alloy dial ensure years of reliable functioning. The dial requires a full 9/10 of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure that they stay engaged, Warn premium hubs use a thick internal wave spring and heavy dial detents.
( 192 )
$169.99
Richmond Gear complete ring and pinion installation kits include Grade 8 ring gear bolts, bearings, seals, shims, marking compound, thread-locking compound, and silicone sealer. To ensure proper fitment, order the kit designed for your make/model application.
( 210 )
$120.99
—
$303.99
Ford Performance Parts ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials.
( 127 )
$190.99
—
$223.99
Axles are important components in your drivetrain. When you need to replace a bad axle, choose Summit Racing™ direct fit axle shafts. These axle shafts are designed to equal or better your OEM replacements and beat outrageous dealer pricing. Manufactured from 1541H steel, these strong axle shafts come with wheel studs, bearings, and seals to finish the job right. So, if you've got an axle to replace, team up with Summit Racing™ and our direct fit axle shafts for an affordable, winning solution.
( 263 )
$218.99
—
$316.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 136 )
$147.32
—
$292.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 128 )
$102.99
—
$260.99
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$101.99
—
$260.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 333 )
$101.99
—
$279.99
The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic. When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a "service axle locker" message and the lockers will no longer engage. The repair would normally be to replace the sensor or the locker assembly, but they are not available, so the entire axle assembly needs replaced. Developed in a partnership with Americas Most Wanted 4X4, Z Automotive Jeep JL/JT Z-Locker OEM controller harnesses provide a simple fix for faulty OEM axle locker. Each harness will bypass the problematic sensor, allowing the locker to operate without the position sensor and provide the proper feedback to the Jeep's computers to keep the system operational without any errors or warnings. You get fully functioning lockers with no side effects. Installation is simple and they will not harm the Jeep's computers as they use the same signaling that it expects from the sensor. The connectors are the same ones used by Jeep and are watertight.
( 23 )
$179.00
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 89 )
$101.99
—
$228.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 281 )
$136.99
—
$448.99
Summit Racing™ ring and pinion gear sets are ideally suited for track duty, street use, or off-road applications.These gear sets are CNC-cut from 8620 steel for outstanding durability, factory-lapped for a precise fit, and Rockwell-tested for hardness.
( 238 )
$168.99
—
$242.99
Moser Engineering performance aluminum differential covers are made of 356 T6 aluminum and are designed to improve ring and pinion gear life, as well as the appearance of your vehicle. They are a support-style cover that stiffens up the main cap area, helping your gears to last longer and even further reduce the amount of ring deflection. The covers weigh only 6 lbs. and include all necessary bolts, washers, and gaskets.
( 258 )
$233.58
—
$245.00
Replace your slow, unreliable vacuum or electric front axle engagement system with one of these 4x4 Posi-Lok cable activated systems. The Posi-Lok systems give you direct control of your front axle right from your cab, so they will engage every time. They have a short 1 in. throw to make shifting on the fly easy, and as an added bonus, a 2WD low-range to give you the rear-wheel torque of 4-LO, and the bind-free steering action of 2-HI.
( 330 )
$174.95
You've improved your reaction time and now it's time to inform your competition. Proform Perfect Launch differential covers state the facts with their logo machined on the raised reinforcing surface. These rear-end covers are made of lightweight but tough aluminum and have been specifically designed to add strength to the rear housing case, particularly during heavy torque situations. Precision-milled and painted black, these Perfect Launch covers include two bolts to stabilize bearing main caps, two magnetic drain plugs, and mounting bolts. You can lose a little weight in your rear-end and send a message to your competition with Perfect Launch reinforced differential covers from Proform.
( 117 )
$158.99
—
$170.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$213.99
—
$236.99
These Summit Racing™ differential support covers have a heat-treated re-enforced aluminum body which helps keep bearings and ring gears in place. The incorporated, adjustable load bolts support the cap which helps prevent cap deflection and breakage, and also ensures pinion depth and backlash remain correct.
( 191 )
$153.99
Simplify your ring and pinion project. Ford Performance Parts ring and pinion installation kits include everything you need for changing your ring and pinion gear. All components are high-quality genuine Ford parts to ensure a hassle-free installation.
( 61 )
$126.99
—
$222.99
Whether narrowing a rear axle housing for bigger tires or just building a new housing for your street car, you will need housing ends to complete the project. Moser Engineering rear housing ends are offered in five popular styles, each CAD-designed to ensure a proper fit. They are forged from mild steel for ease of welding and then fully machined on CNC equipment.
( 57 )
$130.00
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 5 )
$249.95
Warn standard hubs are the ideal choice for OEM hub replacement. These are the same basic hubs that Warn Industries has supplied to OEMs around the world. Warn standard hubs share many features with their premium hubs, such as a 4140 steel clutch ring and inner drive gear and a precision cast hub body.
( 44 )
$124.99
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 102 )
$161.18
—
$282.89
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 50 )
$238.99
Strengthen your race car's rear-end with Summit Racing™ Circle Track axle shafts. Our rear axle shafts are heavy-duty, cut-to-length components giving you the right fit for your application at the right price. These solid shafts are built from heat-treated 8620 steel for longer life. Featuring extra-long splines, Summit Racing™ Circle Track axle shafts can easily be cut to your desired length with a chop saw. Flanged 9 in. Ford axle shaft combo kits include axles, bearings, bearing retainer sleeves, seals, and 4-bolt retainers with new style Big Ford bearings when included. Get ready to make laps with a beefier rear-end and Summit Racing™ Circle Track axle shafts.
( 15 )
$161.99
—
$205.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
