Availability
Showing In Stock Items. Show All 53 Items.
Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.
( 139 )
$110.99
—
$248.61
When designing a specialty truck or buggy, you often find yourself building custom-length, heavy-duty axles. Motive Gear Ten Factory cut-to-fit axle shafts provide blank canvases for your specific needs. These Dana 60 blank 1 1/2 in. shafts will need to be cut to length and machined to 30 or 35 splines, depending on your differential's needs. They are made from high-strength materials and dual heat-treated. When you want the strength and performance of a front Dana 60 axle, but in a custom length, then you'll need Motive Gear Ten Factory cut-to-fit axle shafts.
Not Yet Reviewed
$213.99
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$106.99
—
$132.99
Make your differential perform even better than it did from the factory with Ford Performance Parts 8.8 in. Traction-Lok rebuild kits. They allow you to do the job right and can save you a big chunk of change by rebuilding in lieu of having to do a complete total replacement. Performance to mileage, or a little in between, no one knows how to make your Ford perform better than Ford Performance Parts, so make them your #1 source for performance parts for your Ford vehicle.
( 82 )
$164.99
Moser Engineering kits eliminate the factory C-clip axle retention and provide a safety hub with sealed, press-on bearings. The kits are required when replacing factory C-clip axles with Moser custom alloy axles.
( 43 )
$105.00
—
$210.00
Motive Gear offers differential carrier cases for thousands of applications from 1955 and up. These replacements feature rugged steel construction and will accept all of your factory internal parts without any modifications. Models are available for countless differential case design types, including Chrysler, Dana, Ford, GM, and Toyota. Keep your wheels turning effectively; order the case and options recommended for your vehicle.
( 24 )
$107.99
—
$242.99
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
Machined on state-of-the-art CNC machines from 1045 chromoly steel, Summit Racing™ mini spools will take racing abuse. They replace the side and spider gears in your factory open differential carrier and lock your axles together for positive traction, making them perfect for Circle Track racing. Summit Racing™ mini spools are recommended for dirt track use only.
( 33 )
$101.99
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$120.99
—
$239.99
Whether starting a new project or replacing an old part, you'll find what's needed with Spicer Drivetrain Products differential carrier cases. Spicer supplies carriers to many OE manufacturers, so the replacement units are every bit as tough as the originals. They'll accept all factory and most aftermarket internal parts, allowing for modifications. Going mild or wild … Spicer Drivetrain differential carrier cases are the place to start. Order the model recommended for your vehicle and axle application.
( 20 )
$103.99
—
$157.99
Trail-Gear Creeper flanges offer more trail strength than your factory drive flanges. They are manufactured from hardened 4340 chromoly tool steel and feature a larger center section with more support for the splines. The kits include flanges, dust covers, cover O-rings for a waterproof seal, a drill bit, and heavy-duty studs. The additional studs share the load, preventing hub stud and bolt failures common to stock drive flanges and hubs. Get your rig trail-ready with Creeper flanges from Trail-Gear.
( 2 )
$179.99
ARB offers seal housing kits for a variety of applications, including Ford 8.8 in., Chrysler 8.25 in., and GM 10.5 in. axle models. Each kit includes a seal housing and O-ring. These replacement service parts are manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance.
( 1 )
$104.00
Richmond Gear EXCel differential carrier cases are manufactured to meet the exacting specifications required by Richmond Gear. EXCel has a large offering of original equipment drivetrain components that offer the high-quality that Richmond is known for at affordable prices. Available for many of the most popular vehicles on the road today, Richmond Gear EXCel differential carrier cases will accept all of your factory internal parts without any modifications.
Not Yet Reviewed
$105.99
—
$241.99
AEV Conversions differential covers offer unique features and great looks in an incredibly durable package. Designed for specific front and rear axles of several popular trucks and Jeeps, these heavy-duty, high-strength nodular iron covers have a fluid level port or ports placed at the correct level to meet factory specifications (for front or rear), eliminating the need to guess on the oil level or use a dipstick to figure out the correct amount of oil. For added convenience, all differential covers feature American Expedition Vehicles' exclusive oversized oil fill port located on the top of the cover. This fill port not only allows you to easily add fluid in the field if axle repairs are necessary, but also doubles as an inspection port, allowing you to see inside the differential, inspect ring gear teeth, look for water intrusion, or even use a dial indicator to inspect for problems without ever removing the cover. They also feature reinforced bottom edges with recessed hardware and are e-coated and powdercoated for maximum durability. For serious axle protection with style, AEV Conversions differential covers should be your choice.
( 1 )
$229.00
—
$236.00
aFe Pro Series differential covers bring performance engineering to the protection of your axle's differentials. The durable cast aluminum construction with reinforced ribs provide maximum strength, while the machined fins and textured powdercoating provide a distinctive look. aFe Pro Series differential covers are available individually for front or rear with or without PRO Guard D2 synthetic 75W-90 oil and in complete sets with front, rear, and oil. Features: * Increased oil capacity * Internal/external ribs/fins transfer heat from oil to outside air for maximum cooling * Dual neodymium magnetic plugs--magnetic drain and deep reach fill plug—capture loose particles for maximum gear protection * Large oil level sight glass allows quick and easy oil inspection * Calibration plug set to the factory oil level to eliminate overfilling
( 21 )
$177.00
—
$185.85
Clearance
Richmond Gear offers lightweight quick-change gear sets for a wide range of applications. These replacement spur gears are machined from strong SAE 8620 heat-treated steel in countless sizes, ratios, and other options. The precision gears are critical to differential and drivetrain performance. They're manufactured in accordance with factory specifications to ensure proper fitment and reliability. Order the gear set best suited for your vehicle.
Not Yet Reviewed
$142.99
—
$175.99
TeraFlex axle sleeve kits are designed to reinforce the weak axle tubing on Jeep Dana 30 or 44 factory axles. These steel braces prevent unwanted bending or breaking under extreme conditions. TeraFlex axle sleeve kits include: * Short side inner axle sleeve * Long side inner axle sleeve
Not Yet Reviewed
$111.99
All Balls Racing offers standard axles for a variety of ATV and UTV applications, including models by Polaris, Arctic Cat, Can-Am, Bombardier, Honda©, Kawasaki, and Yamaha from 1995 and up. These CV-style replacements are manufactured from heavy-duty 40CR chromium for increased strength. They're built to factory specifications to ensure proper fitment and long-lasting off-road performance. Order the axles recommended for your powersports machine.
Not Yet Reviewed
$127.25
—
$158.60
DragonFire Racing offers a line of H.D. replacement axle shafts that drop into place with no modifications required. These direct OEM units are made of chromoly steel and are stronger than the factory axles. Likewise, the CV components are precision-machined and induction heat-treated for superior performance. An increased axle angle over stock offers better protection against binding--and, depending on your model, the shafts can be up to 20 percent larger. DragonFire heavy-duty axle shafts are available for a variety of utility vehicle makes/models, including Polaris and Can-Am.
Not Yet Reviewed
$164.80
—
$214.99
Eaton offers a variety of Detroit Locker components for their differential carriers, including springs, couplers, and clutch packs. These factory replacements are manufactured from original materials and specifications to ensure precise fit and optimum performance. Order the parts recommended for your axle application.
Not Yet Reviewed
$199.99
Artec Industries APEX front axle trusses feature a unique peak-shaped top which provides extra rigidity to the whole truss. This allows both a reduction in weight and elimination of long weld seams which can lead to extra weld warping, longer install times, and inconsistency. This peaked structure also applies to the axle tube between the coil perches and extends underneath them, forming a complete truss from end-to-end of the axle. Despite its lighter weight (only 6 lbs.), this design has been proven to hold up to both extreme applications and daily driving. Want easy insurance that your factory Jeep axle can take more abuse than intended? Artec Industries APEX front axle truss kits provide it! Features, items, and specs: * Intended for use on vehicles with minor lifts and at least 1/2 in. bump stop extensions * CNC precision laser-cut in-house from 1/8 in. mild steel * CNC precision-bent in-house for a great fitment (drop in place on axle and it's ready to weld—no puzzle piece assembling; some grinding may be required—every axle varies slightly) * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * All long seams are bent—no need to weld them together * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and front axle disconnect (FAD) which it bridges for reinforcement; can be welded with normal MIG welder using moderate pre- and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Low-profile design allows usage in vehicles with only slight lift
Not Yet Reviewed
$110.51
—
$131.99
Summit Racing™ ring and pinion gear sets are ideally suited for track duty, street use, or off-road applications.These gear sets are CNC-cut from 8620 steel for outstanding durability, factory-lapped for a precise fit, and Rockwell-tested for hardness.
( 242 )
$189.99
—
$244.99
When your vehicle's limited-slip starts acting more like an open differential, you'll need Motive Gear differential clutch packs. These composite clutches restore preload and provide minimal slip before engagement. Most packs provide factory-new hookup, but some available kits make for tight limited-slips. Whether racing, 4-wheeling, or running the streets, limited-slips provide the extra traction to get you where you want to go. Keep these units tight with Motive Gear differential clutch packs.
( 1 )
$106.99
Trail-Gear locking hubs are true replacements. These genuine, factory-new locking hubs are available for several applications. They typically include hub gasket, with some also including cover hardware.
Not Yet Reviewed
$149.99
—
$199.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
