Availability
Showing In Stock Items. Show All 33 Items.
SCS Gearbox 10-Spline Professional Series quick-change gears have been the proven leader in ultra-high performance quick-change gearing since 1987. They're made of 9310 aircraft alloy for maximum strength and are crown-shaved (ground before heat-treating) to minimize backlash and run out, broached for proper shaft fit, and black oxide finished. Gear sets #1 thru #30K are max lightened with the exception of #15K. The gears are lightened where possible, without sacrificing the strength for an average weight savings of 1 1/2 lbs.! The SCS Gearbox 10 spline Professional Series quick-change gears' extra five-step heat-treating process yields maximum gear life for high-stress applications such as Big Block Oswego Super Modifieds, World of Outlaw Sprint Cars, and IROC Series Cars.
( 1 )
$178.99
On Sale
Yukon Gear & Axle bearing kits offer quality and cost savings. When you don't need a master overhaul, these kits can save you some money. They include Timken bearings and races, along with high-quality small parts--and each kit is checked for the right fit to meet your application and replacement needs. These packages are available for dozens of axle models. So when you're ready to install replacement ring and pinion gears in your differential, start with a dependable bearing kit from Yukon. Yukon Gear & Axle bearing kits include: * Pinion bearings * Carrier bearings * Crush sleeve (where applicable) * Oil baffles and slingers (where applicable) * Pinion seal * Gear marking compound and brush
( 8 )
$289.99
$246.49
PEM Racing premium polished lightweight quick-change gears are strong enough for late models, sprint cars, and big block modifieds. These hobbed and fully heat treated 8620 steel gears include lightening holes and are REM ISF micro-finished for less friction and heat for smoother roll which especially helps with crate engines. Multiple gear ratio options are available. Order the premium quick-change gears designed for your application needs. Note: Not all gear sets are drilled on both gears. These gears are designed by engineers and their recommendations are adhered to on tooth count, tooth depth, and lightening on all gears.
Not Yet Reviewed
$164.99
On Sale
Yukon Gear & Axle pinion kits offer gear installation solutions. When you're reusing the carrier bearings and races on your lower mileage vehicle, these kits can save you some dollars. They include Timken bearings and races, along with high-quality pinion seals and small parts. Each kit is stocked with the correct parts for your application to make your pinion install hassle-free. Kits include: * Pinion bearings * Pinion nut (varies by application) * Pinion seal * Pinion depth shims (varies by application) * Complete shim kit (varies by application) * Crush sleeve or preload shims, if applicable * Gear marking compound and brush * 20-page instruction manual
( 2 )
$194.99
$165.74
Clearance
SCS Gearbox 6-Spline Professional Series quick-change gears have been the proven leader in ultra-high performance quick-change gearing since 1987. They're made of 9310 aircraft alloy for maximum strength and are crown-shaved (ground before heat-treating) to minimize backlash and run out, broached for proper shaft fit, and black oxide finished. Gear sets #1 thru #32 are max lightened where possible, without sacrificing the strength for an average weight savings of 1 1/2 lbs.! The SCS Gearbox 6 spline Professional Series quick-change gears' extra five-step heat-treating process yields maximum gear life for high-stress applications such as Big Block Oswego Super Modifieds, World of Outlaw Sprint Cars, and IROC Series Cars.
( 1 )
$144.99
Richmond Gear offers lightweight quick-change gear sets for a wide range of applications. These replacement spur gears are machined from strong SAE 8620 heat-treated steel in countless sizes, ratios, and other options. The precision gears are critical to differential and drivetrain performance. They're manufactured in accordance with factory specifications to ensure proper fitment and reliability. Order the gear set best suited for your vehicle.
Not Yet Reviewed
$168.99
Allstar Performance lends a hand to your car project with their 31-spline gundrilled axles. These quality steel axles come reasonably priced, so you can complete your job right--the first time. If you would like to lose some weight, they are perfect for the job. These axles fit most quick-change and 9 in. Ford rears and are designed for use with 24-spline drive flanges. If you need parts for your project, Allstar Performance 31-spline gundrilled axles are available in several lengths to fit your application.
( 1 )
$229.99
Allstar Performance lends a hand to your car project with their 31-spline solid axles. These quality steel axles come reasonably priced, so you can complete your job right--the first time. They fit most quick-change and 9 in. Ford rears and are designed for use with 24-spline drive flanges. If you need parts for your project, Allstar Performance 31-spline solid axles are available in several lengths to fit your application.
Not Yet Reviewed
$145.99
Summit Bucks
Clearance
ACDelco GM Genuine Parts CV axle shafts transfer torque from your vehicle's transmission or differential to its wheels, and are GM-recommended replacements for your vehicle's original components. These shafts have constant velocity (CV) universal joints at each end to allow your wheels and suspension to articulate. The axle shafts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model recommended for your specific application.
( 12 )
$322.99
$154.50
On Sale
Service your Auburn limited-slip differential with their spider gear kits. These pinion gear kits offer the convenience of receiving everything you need to restore optimal rear wheel performance to your vehicle.
( 1 )
$172.99
$155.69
On Sale
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$195.99
—
$212.99
$176.39
—
$181.04
On Sale
Yukon Gear & Axle differential clutch kits are manufactured with better-than-OE materials for off-road and recreational use—and they fit multiple applications. If you're looking for the best performance from your off-road vehicle, order a Yukon differential carrier clutch set today.
( 22 )
$170.99
$145.34
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$184.99
—
$448.99
Allstar Performance ring and pinion gear sets are engineered, manufactured, and tested for maximum performance. The high-quality differential components are suitable for race, street, and off-road use. Their superior quality is the result of years of development, outstanding design, and state-of-the-art machining methods. Allstar ring and pinion sets are available in many different ratios to fit a variety of differentials. Plus, they're perfectly matched to provide you with reliable and quiet operation.
( 52 )
$169.99
SVL Drivetrain ring and pinion gear sets make it easy to find the right ratio for your application. Engineered and manufactured for all makes and ratios, they deliver the ideal blend of coverage, performance, and value. SVL starts their ring and pinion sets with a computer-generated gear summary. From there, the gearing is forged from alloy steel for optimal hardness; then the gears are cut with the utmost accuracy to ensure the smoothest possible ride—and computer-controlled heat-treating results in extra wear resistance. In the final stage of the process, the ring gear is mated to the pinion through gear lapping, which provides ideal meshing of the gearing. You can count on SVL Drivetrain ring and pinion gear sets to fit and function as expected in your automotive application.
( 30 )
$213.99
Summit Racing™ ring and pinion gear sets are ideally suited for track duty, street use, or off-road applications.These gear sets are CNC-cut from 8620 steel for outstanding durability, factory-lapped for a precise fit, and Rockwell-tested for hardness.
( 241 )
$271.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 87 )
$101.99
—
$202.99
On Sale
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 50 )
$299.99
$254.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 142 )
$186.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
