Availability
Showing In Stock Items. Show All 90 Items.
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
Not Yet Reviewed
$879.95
Manufacturer Rebate
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
Engineered to exacting OE specifications, Aisin free wheel hubs efficiently transfer and disconnect drivetrain power to the front wheels of part-time 4WD vehicles. Compact in design and durable enough for the toughest terrain, they are manufactured to the highest standards and are always OE-matched. Additional features of Aisin free wheel hubs include: * Withstands the same rugged terrain tests as OE hubs * Robust locking mechanism provides a reliable connection of drivetrain power to the wheels in 4WD mode * Large manual dial allows the user to effortlessly change from 2WD to 4WD and back
( 11 )
$101.99
—
$172.99
Extra beef for your rock crawler—Longfield axle shaft and Birfield joint kits put the brawn back into your fun. Stock axles and joints just don't have the strength to deal with larger tires and additional horsepower. Longfield kits furnish you with robust 100 percent chromoly components that are critical for you to "make the grade." So, go where you want, run any trail, and adventure with confidence—knowing your rig's equipped with Longfield axle shaft and Birfield joint kits. Order model designed for your vehicle and axle application.
( 7 )
$642.63
—
$911.42
Longfield birfield joints are super strong to furnish your rig with a better performance option. They're built from 100 percent chromoly--the housings are forged from 4340 and the internals are 4340, as well, but also heat-treated. The joints are polished with precision to remove any imperfections that may cause stress risers. Beef up your Toyota for climbing with Longfield birfield joints.
( 4 )
$224.28
—
$350.66
How many degrees of twist will your stock axles handle? Longfield axle shafts beef up your machine's rear with strong chromoly that can handle 120 degrees of twist. Big tires and low crawler gears can and do lead to broken axles. Upgrade your drivetrain with Longfield rear axle shafts. Order the model designed for your vehicle application.
( 6 )
$196.71
—
$494.11
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 47 )
$59.99
—
$302.99
Mile Marker Supreme lockout hubs offer all-metal construction. Built to exacting standards, they feature patented technology and smooth operation for the performance that you expect and need. Supreme lockouts are available for many applications, domestic and import, and come in your choice of great looking chrome or stainless steel. These hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Replace your old hubs with ones made to be abused--Mile Marker Supreme lockout hubs.
( 191 )
$159.45
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 49 )
$232.99
—
$442.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$88.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 336 )
$170.99
—
$279.99
Trail-Gear Creeper axle ball gussets beef up your knuckle balls. Big tires, bumpy terrain, and aggressive driving can take their toll. TG Creeper gusset kits reinforce the knuckle balls to prevent the outer knuckle ends from bending and damaging your solid axle. Kits include unpainted upper gussets with holes for mounting shocks, lower gussets, and steering stop gussets. Knuckle down, not under, to the pressures of rocky trails with the added support and strength of Trail-Gear Creeper axle ball gussets.
( 1 )
$99.99
Trail-Gear Creeper flanges offer more trail strength than your factory drive flanges. They are manufactured from hardened 4340 chromoly tool steel and feature a larger center section with more support for the splines. The kits include flanges, dust covers, cover O-rings for a waterproof seal, a drill bit, and heavy-duty studs. The additional studs share the load, preventing hub stud and bolt failures common to stock drive flanges and hubs. Get your rig trail-ready with Creeper flanges from Trail-Gear.
( 2 )
$179.99
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$19.99
—
$36.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$284.99
—
$569.99
These Powertrax differential spring rebuild kits are designed to keep your locker operating smoothly. They include the necessary springs for installation. The rebuild kits are available for the Lock-Rite and No-Slip carriers.
( 29 )
$13.99
—
$20.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 55 )
$22.99
There's nothing quite like blazin' the trails! However, if you've ever experienced breaking your manual locking hubs, don't fret—Trail-Gear offers a great fix to nix that problem with their axle drive flange kits. These components are the perfect replacement for your existing 35-spline internal locking hubs or Warn 35-spline manual locking hubs, so you can return to the fun-filled action! Trail-Gear axle drive flange kits include: * Drive flange pucks (4340 chromoly coated with black oxide) * Drive flange covers (billet aluminum and anodized black with Trail-Gear logo) * Rubber O-rings * Hardened snap rings
( 4 )
$59.99
—
$399.99
SVL Drivetrain ring and pinion gear sets make it easy to find the right ratio for your application. Engineered and manufactured for all makes and ratios, they deliver the ideal blend of coverage, performance, and value. SVL starts their ring and pinion sets with a computer-generated gear summary. From there, the gearing is forged from alloy steel for optimal hardness; then the gears are cut with the utmost accuracy to ensure the smoothest possible ride—and computer-controlled heat-treating results in extra wear resistance. In the final stage of the process, the ring gear is mated to the pinion through gear lapping, which provides ideal meshing of the gearing. You can count on SVL Drivetrain ring and pinion gear sets to fit and function as expected in your automotive application.
( 30 )
$190.99
—
$195.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$232.23
—
$462.99
Rugged Ridge manual locking hubs are crafted from impact-resistant nodular iron and feature a corrosion-resistant die-cast aluminum cap. They provide better 4WD performance when locked (and improved fuel economy in 2WD when unlocked) than automatic hubs. These hubs don't have the slippage or partial engagement/disengagement issues that plague automatic hubs. They're durable, easy to install, and cost-effective! Order the pair of Rugged Ridge manual locking hubs designed to fit your application.
( 109 )
$226.99
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$16.89
—
$20.99
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 20 )
$11.99
In and out of the water? Trail-Gear axle housing breathers feature an internal spring-loaded flapper valve that prevents water from entering through the breather during your water crossings. These TG models are stock replacements for old, rusted, or damaged units.
( 2 )
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
