Availability
Showing In Stock Items. Show All 28 Items.
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
Low Range Off-Road differential master rebuild kits include everything you need to make your gear setup a breeze. The ring and pinion gear installation kits contain necessary components, such as trail, head, and carrier bearings; shims, seals, crush sleeves, pinion nuts, and more (depending on kit). Low Range rebuild kits are available for a variety of vehicle and axle model applications.
Not Yet Reviewed
$182.51
Trail-Gear locking hubs are true replacements. These genuine, factory-new locking hubs are available for several applications. They typically include hub gasket, with some also including cover hardware.
Not Yet Reviewed
$149.99
Rugged Ridge manual locking hubs are crafted from impact-resistant nodular iron and feature a corrosion-resistant die-cast aluminum cap. They provide better 4WD performance when locked (and improved fuel economy in 2WD when unlocked) than automatic hubs. These hubs don't have the slippage or partial engagement/disengagement issues that plague automatic hubs. They're durable, easy to install, and cost-effective! Order the pair of Rugged Ridge manual locking hubs designed to fit your application.
( 109 )
$216.99
All Balls Racing wheel and carrier bearing seal kits are hands-down the most complete line of bearing seal kits on the market! They are available in a wide variety of powersports applications, from ATV and off-road to street bikes. These All Balls Racing wheel and carrier bearing seal kits have premium high-speed bearings that feature low-drag, double-lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention. High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC nitrile elastomer wheel seals are specifically designed to keep out water and dirt. Their rubber coated outside diameter helps to create an optimum seal at the hub.
( 20 )
$102.23
On Sale
Stock shafts don't always hold up to the rigors of the trail. Quadboss rugged axle shafts are as good as or better than OEM parts. Direct replacement chromoly steel axle bars come fully assembled with three percent moly grease and are ready to install with stainless steel clamps. Nearly 200 models are available for fitment on countless UTV/ATV applications from the 1980s and up. Get your quad back on the trail and off-road with long-lasting quality at an outstanding price. Select the rugged axle shafts recommended for your off-road vehicle.
Not Yet Reviewed
$118.69
—
$193.02
$106.82
—
$173.72
On Sale
You require and Quadboss provides. Their differential bearing and seal kits have all that you need to service your model of ATV/UTV--leak-free seals and precision bearings.
Not Yet Reviewed
$142.58
—
$164.89
$128.32
—
$148.40
Yukon Gear & Axle pinion installation kits use Timken bearings and races, along with high-quality seals and small parts. They are terrific solutions for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. And Yukon does the research to make sure that you have everything you need to install your gear set, saving you time and money. The pinion installation kits include pinion bearings and races, a complete pinion shim kit, marking compound with a brush, and the additional pieces specific to your kit and application.
( 3 )
$261.99
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$298.99
Yukon mini spools get you locked for action without breaking the bank! These mini spools offer a low-cost option for full-time lockup. They're built from quality steel to provide 100 percent power to both tires at all times--and they're easy to install. The spools are offered in a variety of styles for nearly a dozen axle models. Get lots of traction for less cash with mini spools from Yukon Gear & Axle.
( 24 )
$208.99
All Balls Racing complete 8-ball extreme-duty CV axles are designed for more aggressive applications. They'll take on the rough terrain and abuse you put your ATV/UTV through on a frequent basis. These CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * Eight precision ball bearings deliver smoother operation and increased joint strength * Larger chromoly axle shaft * 35 percent larger bearing cages and races * Increased load capacity * 10 to 40 percent stronger the OE and competitor axles * Last up to 12 times longer * Precision-machined for precise OEM fitment * Black oxide coating with a matte finish that covers both joints for ultimate rust and corrosion protection * High performance molybdenum grease reduces heat and friction * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 1 )
$227.95
All Balls Racing offers the most complete line of differential bearing and seal kits on the market! They're available for a wide range of ATVs from the 1980s and up. The kits feature premium high-speed bearings with low-drag, double-lip seals on both sides—to provide a superior exclusion of water and dirt, as well as improved grease retention. They contain everything that you need to rebuild a differential quickly and easily. Order the kit recommended for your application.
( 2 )
$139.81
—
$154.41
All Balls Racing complete 6-ball heavy-duty CV axles are designed and built as rugged OEM replacements with the current industry-standard of six ball bearings. They're engineered to handle the increasingly rough terrain and abuse you put your ATV/UTV through on a frequent basis. All Balls Racing complete 6-ball heavy-duty CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * 6-ball bearing * Chromoly steel * Stronger than OEM * 30 percent stronger than the competition * 50 percent longer lasting than the competition * High performance molybdenum grease reduces heat and friction * Precision-machined for precise OEM fitment * Black laminate coating with a gloss finish to resist rust and corrosion * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 4 )
$180.45
Don't allow worn or damaged couplers on your Powertrax differential system to compromise your vehicle's performance or safety. Replace bad coupler components with new ones from Powertrax to regain optimum traction response.
( 1 )
$176.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$176.99
—
$278.99
Trail-Gear Trail-Creeper ring and pinion gears can be relied on, even over the most punishing trails. These are the same gears that have won multiple championships on the W.E. Rock circuit and have proven themselves on some of the most grueling off-road courses in the world. These gears are made from tool-grade 8620 steel and heat-treated for strength and wear resistance. The gear teeth are cut using Gleason CNC gear-cutting technology, producing an unprecedented level of accuracy and surface finish. This allows Trail Creeper gears to transmit more torque with improved fuel efficiency. The higher accuracy and surface finish also produce a quieter-running gear set, which means that they'll work great on your daily driver, too. If you're looking for a gear set that's easy on the wallet, but can handle whatever you throw at it, look to Trail-Creepers from Trail-Gear.
Not Yet Reviewed
$259.00
Longfield ring and pinion gears are the very same that have won multiple championships in professional desert racing and competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world. They offer superior strength, quiet operation, and durability through high-grade 8620 chromoly steel, precision 5-cut tooth profiling (increasing contact area), and Gleason CNC machining for high accuracy, smoother surfaces, and quieter operation, making them great for daily drivers. All 'standard finish' ring gears are black phosphate coated for wear resistance and corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth, resulting in less wear during the initial break-in period and increases the overall life expectancy of the gears. Select the gears for your application. Key features and benefits: * Strength and durability—made from tough 8620 chromoly steel with a 5-cut tooth profile that distributes load better than standard gears, reducing stress and wear * Advanced tooth design utilizes a 5-cut process (instead of 2-cut) for a tapered tooth profile, increasing contact area and spreading load for less stress * Precision-cut using Gleason CNC machines for high accuracy, smoother surfaces, and quieter operation, making them great for daily drivers * Standard gears have a black phosphate coating to hold lubricant, reducing initial break-in wear and increasing longevity * Reduced wear and friction—features like black phosphate coating (standard) and REM ISF Super Finish (optional) minimize friction, especially during initial break in, extending gear and bearing life * Improved performance—helps restore power and acceleration lost with larger tires, allowing the engine to operate in a more efficient RPM range * Better value—Longfield goes directly to Tier 1 OEM manufacturers to have gears made to their exact specifications—by cutting out the middlemen, they can offer the highest quality gears at a competitive price
Not Yet Reviewed
$259.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
