Availability
Showing In Stock Items. Show All 19 Items.
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
—
$1,750.00
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,551.99
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,500.00
—
$5,100.00
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,175.00
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$1,169.99
High-horsepower and stock axles are fine if you're sitting in neutral and revving the engine, but foot-pounding acceleration requires Gforce Outlaw axle shafts. These direct bolt-in axles feature anti-wheel hop technology for smoother launches, powdercoating for corrosion resistance, and extremely strong CNC-machined one-piece outer and inner billet stubs. Their proprietary aerospace billet alloy shafts use large 31-spline axle bars and 31-spline severe-duty CV joints, enabling these IRS axles to support awe-inspiring performance! Outlaw CVs produce greater travel and operating angles than OE joints, helping to keep tires on the road instead of loitering in outer space. All axle assemblies are hand-built in the USA with premium materials. Order the model recommended for your application.
( 2 )
$2,199.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,175.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
