Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
14 Results Found For "Racing"
Strange Pro Race Custom Axle Packages
With Strange Pro Race custom axles, your set-up is optimized for drag racing! They're manufactured from Hy-Tuf, an ultra-strength alloy that—when combined with a thru-hardened heat-treat—achieves superior torsional strength and ductility. Strange Pro Race packages are available with bearing, studs, retainer plates, or eliminator kits. You can also get the axles alone to accommodate your application. For maximum torsional strength and winning performance, start your spec sheet with Strange Pro Race custom axles. Many Pro Race custom axles and packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Thru-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of lengths * Choice of bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 7 )
$594.99
—
$942.99
Strange Pro Race Custom Axle and Spool Packages
With Strange Pro Race custom axle and spool packages, your setup is optimized for drag racing! The axles are manufactured from Hy-Tuf, an ultra-strength alloy that, when combined with a through-hardened heat-treat, achieves superior torsional strength and ductility. Their lightweight steel spools are forged in the USA from premium steel and are lightened to maximize the strength-to-weight ratio. Strange Engineering offers many different Pro Race axle and spool packages with bearings, studs, retainer plates, and eliminator kits to accommodate your application. All of them provide quality components to complete your spec sheet with maximum torsional strength and winning performance. Many Pro Race custom axle and spool packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Through-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of spline count, lengths, and bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 2 )
$787.99
Strange C-Clip Eliminators
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$249.99
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$994.99
—
$5,696.99
Moser Engineering Semi-Float Custom Order Alloy Axles
These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.
( 15 )
$243.00
—
$635.00
Strange 12-Bolt F-Body Rear End Assemblies
These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover
Not Yet Reviewed
$3,033.99
—
$3,419.99
Moser Engineering C-Clip Custom Order Alloy Axles
These NHRA and IHRA-accepted premium alloy C-clip axles from Moser Engineering are custom built specifically for your vehicle. Induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. Available with a press fit or screw in stud axle flange and choice of stud diameters. Studs not included. All Moser C-clip axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing. All custom order axles are Special Order and Non-Returnable.
( 6 )
$200.00
—
$390.00
Strange Floater Kits
Strange floater kits have become the standard for Pro Mod classes, blown alcohol classes, and other high-horsepower abusive drag racing applications. The Strange floater kits are designed for use with 40-spline axles due to the tremendous increase of torsional strength. Upgrade your floater kit to include the standard brake system, or choose the carbon fiber option for maximum stopping power. Building a 6-second, 230-plus mph race car? Try one of these Strange floater kits and put a bulletproof assembly to the test. Strange floater kits include: * Your choice of 8.5 in. or 13.5 in. 4130 chromoly steel spindles * Steel drive plates * Aluminum hubs * Forged steel slotted rotors * Timken bearings * Seals * chromoly wheel studs * Steel lug nuts
( 1 )
$3,211.99
—
$3,316.99
Strange C-Clip Axles
Strange C-Clip axles are designed for those wanting to upgrade their axles to stronger, more reliable units. These axles are manufactured from the same high-strength steel as the rest of the S-Series performance axles that have proven themselves in race and road cars all over. Their hardened surface protects the axles and bearings, giving them a longer service life and their deeper case hardening offers superior torsional strength when compared to OEM axles. Each axle features fully ground bearing surfaces, is designed to work with OEM bearings, and is drilled for screw-in and OEM press-in studs. Upgrade your axes to help reign in and plant all of the horsepower your hot rod or race car can muster with these Strange C-Clip axles.
( 21 )
$392.99
Moser Engineering Ford 9 in. Third Member Assemblies
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,593.00
Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages
Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.
Not Yet Reviewed
$2,547.00
Winters Steel Tube and Bell Banjo Axle Assemblies
Improving on Henry's design, Winters steel tube and bell banjo axle assemblies will put power to the pavement! Winters bumps the banjo up a level with these stock-appearing cast aluminum banjo centers fitted with their steel tubes and bells. They come complete with an 8 3/8 in., 3.78 ratio ring and pinion, as well as a race-proven Wedgelock all-gear drive differential that senses wheel spin and delivers positive traction. Making a good thing better--Winters steel tube and bell banjo axle assemblies.
( 1 )
$3,028.99
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,794.99
Strange Ultra Case Gear Change Kits
You purchased an Ultra case for its unparalleled strength and design. When it comes to setting it up, you need Strange Engineering Ultra case gear change kits. These kits come with almost everything you'll need to complete your installation and get your rear axle running smoothly again. When changing your ring and pinion be certain to pick up Strange Engineering Ultra case gear change kits to finalize the job.
Not Yet Reviewed
$224.99
