Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Filters
21 Results Found For "Kits"
Strange Ring and Pinion Installation Kits
Strange ring and pinion installation kits include everything from the basic kits to complete kits that you'll need to successfully install your ring and pinion. Strange ring and pinion installation kits are designed using top-quality components to ensure performance and durability.
( 1 )
$134.99
—
$199.99
Strange Floater Kits
Strange floater kits have become the standard for Pro Mod classes, blown alcohol classes, and other high-horsepower abusive drag racing applications. The Strange floater kits are designed for use with 40-spline axles due to the tremendous increase of torsional strength. Upgrade your floater kit to include the standard brake system, or choose the carbon fiber option for maximum stopping power. Building a 6-second, 230-plus mph race car? Try one of these Strange floater kits and put a bulletproof assembly to the test. Strange floater kits include: * Your choice of 8.5 in. or 13.5 in. 4130 chromoly steel spindles * Steel drive plates * Aluminum hubs * Forged steel slotted rotors * Timken bearings * Seals * chromoly wheel studs * Steel lug nuts
( 1 )
$3,211.99
—
$3,316.99
Strange Ultra Case Gear Change Kits
You purchased an Ultra case for its unparalleled strength and design. When it comes to setting it up, you need Strange Engineering Ultra case gear change kits. These kits come with almost everything you'll need to complete your installation and get your rear axle running smoothly again. When changing your ring and pinion be certain to pick up Strange Engineering Ultra case gear change kits to finalize the job.
Not Yet Reviewed
$224.99
Strange C-Clip Eliminators
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$249.99
Strange Differential Carrier Bearings
These Strange differential carrier bearings are designed to fit the Strange carriers.
( 13 )
$169.99
Winters Early Ford V8 Quick-Change Center Kits
Winters early Ford V8 quick-change center kits provide you with what you need to build your own custom rear-end. These kits are for use with early Ford bell tubes, axles, and differentials. The assemblies use original early Ford steel tubes and bells, axles, and carrier assemblies. Each kit comes complete with one quick-change center section, a 4.11:1 ring and pinion, one axle housing gasket set, one carrier bearing, and one straight cut, 6-spline gear set of your choice. Hardware and instructions are included.
Not Yet Reviewed
$1,949.99
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,594.99
—
$3,371.99
Strange Street Series Axle Packages
Strange Street Series axle packages are designed with you in mind! Strange created these Street packages for ease of installation and to save you time and money--and still deliver the performance you expect! These street axles are premium alloy steel forgings that are induction-hardened and perfect for your high performance street and/or strip application. Choose an axle kit that offers the right components with savings and quality for you--Strange Street Series axle packages.
( 6 )
$557.99
—
$846.99
Strange Pro Race Custom Axle Packages
With Strange Pro Race custom axles, your set-up is optimized for drag racing! They're manufactured from Hy-Tuf, an ultra-strength alloy that—when combined with a thru-hardened heat-treat—achieves superior torsional strength and ductility. Strange Pro Race packages are available with bearing, studs, retainer plates, or eliminator kits. You can also get the axles alone to accommodate your application. For maximum torsional strength and winning performance, start your spec sheet with Strange Pro Race custom axles. Many Pro Race custom axles and packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Thru-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of lengths * Choice of bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 7 )
$594.99
—
$942.99
Strange Custom S/S and S/T Axles
These Strange S/S axles are designed to meet the demanding bending loads of street use. They are manufactured by Strange from modified 1550 steel. After extensive research and testing, Strange determined that 1550 steel, in conjunction with specified percentages of additional elements, creates the basis for the strongest induction-hardened axles available. Call 1-800-230-3030 for more information.
( 5 )
$537.99
—
$784.99
Moser Engineering Mopar 8 3/4 in. Housing and Axle Packages
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
Strange Ford 9 in. Lightweight Aluminum Center Sections
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,794.99
Moser Engineering 9 in. Housing and Axle Packages
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$1,331.00
—
$3,114.00
Strange 12-Bolt F-Body Rear End Assemblies
These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover
Not Yet Reviewed
$3,033.99
—
$3,419.99
Strange Pro Race Custom Axle and Spool Packages
With Strange Pro Race custom axle and spool packages, your setup is optimized for drag racing! The axles are manufactured from Hy-Tuf, an ultra-strength alloy that, when combined with a through-hardened heat-treat, achieves superior torsional strength and ductility. Their lightweight steel spools are forged in the USA from premium steel and are lightened to maximize the strength-to-weight ratio. Strange Engineering offers many different Pro Race axle and spool packages with bearings, studs, retainer plates, and eliminator kits to accommodate your application. All of them provide quality components to complete your spec sheet with maximum torsional strength and winning performance. Many Pro Race custom axle and spool packages offer: * Forged from low-carbon, high-manganese, high-nickel, and high-molybdenum steel * Majority of machining performed before heat-treat to provide consistent hardness * Through-hardened to Rc 45-48 to maximize the material's torsional strength * Finish machined after heat-treat to ensure accuracy * Choice of spline count, lengths, and bolt circle * Forged in the USA * Designed and machined by Strange Engineering
( 2 )
$787.99
Winters Steel Tube and Bell Banjo Axle Assemblies
Improving on Henry's design, Winters steel tube and bell banjo axle assemblies will put power to the pavement! Winters bumps the banjo up a level with these stock-appearing cast aluminum banjo centers fitted with their steel tubes and bells. They come complete with an 8 3/8 in., 3.78 ratio ring and pinion, as well as a race-proven Wedgelock all-gear drive differential that senses wheel spin and delivers positive traction. Making a good thing better--Winters steel tube and bell banjo axle assemblies.
( 1 )
$3,028.99
Winters Championship Independent Quick-Change Assemblies
Winters Championship Independent quick-change assemblies create the absolute ultimate independent rear that money can buy. These quality-engineered assemblies cross an independent rear with a quick-change to handle all of your street rod power needs. Winters uses more efficient spiral bevel ring and pinions--they run cooler and use less power! Set your hot rod up with the cool appeal and advantage of Winters Championship Independent quick-change assemblies.
Not Yet Reviewed
$3,920.99
Moser Engineering 12-Bolt GM Housing and Axle Packages
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Strange 12-Bolt Bolt-In Rear-Ends
Strange 12-bolt bolt-in rear-ends with heavy-duty posi and leaf spring mounts are custom-made to your specifications. Details: * Factory or custom widths available * Choice of housing ends and leaf spring mounts * Professionally welded and assembled * Crated to protect your investment Information required: * Factory bolt-in * Year, make, and model of vehicle * Factory / Custom width (specify) * Mounts: Single leaf / Multi leaf / Other (specify) * Type of brakes: OEM Drum / Aftermarket * If aftermarket, specify manufacturer and part number * Bolt circle and stud choice * Gear ratio Assembly includes: * 12-bolt housing with leaf spring mounts installed * 30-spline alloy axle package * 4 1/2 in., 4 3/4 in., or 5 in.″ bolt circle * Choice of press-in or screw-in stud kit * Standard gear set * Eaton HD clutch style posi * Choice of gear ratio * S-Series pinion yoke * Pinion yoke U-bolt kit * Chrome steel cover * Bottle of friction modifier (clutch units only) * Fully crated
Not Yet Reviewed
$3,033.99
Moser Engineering Dana 60 Housing and Axle Packages
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$3,316.00
Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages
Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.
Not Yet Reviewed
$2,547.00
