Availability
With Hinson Motorsports driveshafts, the only question you'll be asking yourself is why you didn't do it sooner! Ready to install out of the box, these beauties replace your weak driveshaft with the strength to perform. For better reliability and performance, the modification you need to make is upgrading to Hinson Motorsports driveshafts. Some of the benefits may include: * Dual-pattern differential flange that fits both automatic and manual transmissions (depending on application) * Smoother shifts * Less rotating mass for more horsepower to the rear wheels * Better throttle response * Hardware and thread locker (depending on application)
( 32 )
$865.00
—
$1,149.00
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 22 )
$45.50
—
$282.02
Sonnax slip yokes are forged, not cast, for greater strength, and they undergo a precision-machining process to guarantee exceptional balance and minimal runout. They are 100 percent leak-tested, the seal plug is O.D. ground for superior seal, and yokes are air-tested to 40 psi. Sonnax slip yokes are available in different lengths and tooth counts to fit your specific transmission application.
( 106 )
$156.02
—
$294.99
Strange heavy-duty U-joint girdles are the ultimate in U-joint retention. Designed to withstand the high stresses of racing and off-road abuse, these fasteners are built using a stud-and-nut method versus the traditional U-bolt. Providing a 360 degree clamping area prevents needle bearing damage and journal brinelling—which translates to less heat and longer life. Features include: * Heat-treated, chromoly steel straps * ETD 150 steel studs * ARP distorted thread, 12-point nuts * Designed for use with Strange pinion yokes
( 28 )
$99.99
—
$112.99
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 195 )
$405.99
—
$469.99
Summit is proud to offer our Summit Racing™ Transmission Yokes. Built from quality materials these are offered in various Lengths and common U-joint sizes to allow you to replace your bent, rusted, or worn factory yoke or finish up a swap where the driveshaft is just a touch too short. Eliminate that last weak spot in your driveline with Summit Racing™ transmission yokes.
( 59 )
$79.99
—
$258.99
Summit Racing™ steering joints are the perfect components to finish your race vehicle's steering system. Available in steel and stainless steel, these joints feature staked bearing caps to prevent loosening and adjustment malfunction. They're available in multiple shaft and spline types/sizes to suit your application.
( 90 )
$65.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 111 )
$25.99
—
$175.99
Mopar Replacement differential assemblies offer quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep on the road. You can count on these units to effectively drive your wheels, and keep you moving. Restore and repair your vehicle with genuine Mopar differential assemblies.
( 17 )
$999.99
—
$2,042.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 11 )
$689.99
Strange offers superior transmission yokes in heavy-duty cast steel and 1350 Series chromoly to fit the most popular transmissions. Fully heat-treated to achieve optimal tensile strength, Strange chromoly transmission yokes are machined to ensure concentricity and balance for ideal driveshaft operation. Plus, they also offer specially heat-treated (case-hardened) yokes for your roller-bearing extension housings and chromoly Powerglide 2-piece that dramatically reduce transmission changes. For both racing and street use, Strange transmission yokes are a solution to failure-prone stock yokes.
( 124 )
$84.99
—
$314.99
Classic Performance slip shaft drivelines deliver the ultimate in performance. Featuring steel construction, these U-joint style driveshafts are self-adjusting, 33.75 in. collapsed to 36.5 in. expanded. This minimizes wear and tear on the carrier bearing and the rear-end on vehicles where the ride height has been altered. They're recommended for a variety of Chevy cars and trucks from the 1950s, '60s, and '70s.
( 13 )
$258.99
Age, miles, and abuse take their toll on drivetrain parts, making rebuilds and new parts a necessity. When you're seeking direct replacements for OEM, you need Spicer Drivetrain Products slip yokes. Spicer products are used in the production of many vehicles and are well-respected for quality, innovation, and value. These slip yokes are produced with the same high standards as the originals for reliable service. When rebuilding a transmission, use the parts that made it great. Go with Spicer Drivetrain Products slip yokes.
( 124 )
$18.99
—
$1,032.99
To complete the drivetrain, use one of these Strange Engineering chromoly yokes. They will endure the brunt of the abuse in the drivetrain.
( 43 )
$144.99
—
$294.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 312 )
$171.99
—
$3,357.99
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 149 )
$16.99
—
$101.99
The weld-on driveshaft yokes from Strange Engineering are stronger than your stock yoke. They're ideal for performance applications, or when fabricating your own driveshaft. These yokes are available in a variety of materials to suit your needs.
( 21 )
$35.79
—
$94.99
Get moving with Summit Racing™ driveshafts. They are drawn-over-mandrel steel tube assemblies with a transmission slip yoke. Our tube and yoke assemblies are available in three transmission joint styles, including various U-joint options for your restoration job. Bolt on Summit Racing™ driveshafts for smooth handling to keep yourself on the road and between the lines.
( 15 )
$311.99
—
$387.99
Replace your damaged, worn, or missing yoke with one of these Spicer Drivetrain Products flange yokes. Most are manufactured from durable nodular iron or steel and install in the factory location for a direct fit. The yokes are available for different universal joint styles and configurations to fit your specific application; some are often useful when swapping out standard driveshaft components for a flat flange, pinion-style yoke.
( 54 )
$32.99
—
$482.99
Motive Gear offers a replacement driveshaft yokes for thousands of applications. As an integral part of the differential transmission system, they help transfer power from the driveshaft to the pinion. The yokes are available in different materials and for a variety of positions and case designs. All Motive Gear products undergo rigid quality control processes to ensure proper fit, performance, and longevity.
( 20 )
$52.99
—
$371.99
Strange Engineering's driveshaft tubes are produced with top-quality chromoly tubing. These seamless tubes offer the perfect foundation for your custom driveshaft needs.
( 10 )
$112.99
Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.
( 210 )
$11.99
—
$198.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$598.48
—
$3,058.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
