Availability
Showing In Stock Items. Show All 31 Items.
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,219.99
—
$1,556.99
$1,097.99
—
$1,401.29
On Sale
Shafer's Classic Reproductions third member fasteners for applications such as 1964-67 Ford Mustangs and 1957-67 full-size Ford rear housing differential covers. The hardware includes 10 nuts and 10 copper washers. Each steel hex head nut is clear cadmium plated like the originals.
( 1 )
$23.99
$21.59
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$514.99
—
$869.99
$463.49
—
$782.99
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$378.95
—
$472.95
$219.95
—
$260.95
On Sale
Quicksilver Black Diamond Bravo Two propellers are big and beefy with incredible amounts of blade area for maximum thrust and increased overall efficiency. Designed for MerCruiser engines with Bravo Two drives, several options are available. Select the one needed.
Not Yet Reviewed
$592.60
$533.34
On Sale
Quicksilver's revolutionary Q3 propellers improves both acceleration and top speed on center consoles, high-horsepower pontoons, and stern drive powered runabouts. The design consists of high rake angles and thin blades, resulting in the Q3 being the highest performing 3-blade propeller in the Quicksilver line-up. Additional details: * Available in different diameters and blade pitch options * Equipped with PVS – Performance Vent System * Polished stainless steel propeller * Revolutionary prop that improves both acceleration and top speed
Not Yet Reviewed
$817.87
$736.08
On Sale
Quicksilver Flo-Torq propeller hub kits are designed for use with many of the most popular Quicksilver and Mercury props on the water. Quicksilver Flo-Torq SSR HD propeller hub kits fit select 4-stroke outboards with 1.25 in. propeller shafts. They feature Soft-Shift Rubber technology that helps prevent shifting noise, vibration, and harshness (a 22 to 23 percent reduction), plus enhanced durability protecting the engine drivetrain from impact damage. Each kit includes SSR drive sleeve, three-washer set (washer, thick washer, and cupped Belleville washer), tabbed lock washer, and locking prop nut.
Not Yet Reviewed
$181.23
$163.11
On Sale
Quicksilver Flo-Torq II propeller hub kits can improve the performance of your Quicksilver propeller. These durable modular hub systems cushion and protect the drivetrain from most impacts. Select the hub kit designed to fit your marine engine.
Not Yet Reviewed
$38.24
—
$69.15
$34.42
—
$62.24
On Sale
Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit makes installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt
( 1 )
$699.95
$384.95
On Sale
For good overall performance and value, the Black Diamond is your prop. While Quicksilver Black Diamond propellers are standard equipment on most boats with Mercury Mariner Mercruiser power, they are perfect replacements for all engine brands using the Quicksilver Flo Torq II hub system. Black Diamond propellers are recommended for use on boats with up to 250 hp and with a top speed of less than 50 mph. The high-quality casting and durable high-gloss Phantom Black finish make them easy to maintain and repair. Choose the Black Diamond 3-blade aluminum propeller designed for your marine engine.
Not Yet Reviewed
$78.93
—
$206.70
$71.04
—
$186.03
On Sale
Quicksilver Nemesis propellers feature the most aggressive geometry available in an aluminum propeller. They have more cup for best-in-class acceleration and holding, a tenacious grip in turns and their high-rake, reduced diameter design helps maintain top-end speed. Nemesis 4-blade propellers will provide a 16 to 25 percent faster acceleration and superior holding with no penalty in top speed vs. a comparable 3-blade aluminum propeller. Select the Quicksilver Nemesis preferred for your engine.
Not Yet Reviewed
$161.43
—
$200.71
$145.29
—
$180.64
On Sale
Time can be rough on your axles, especially for a 4WD. Years of use and abuse can cause damage to the splines of bearing surfaces. Hurst Engineering axles are made from high-quality, heat-treated 1541H alloy for strength and durability. They offer 5-lug and 6-lug direct-fit axles to replace those in your C or K Series truck with an 8.875 12-bolt 30 spline axle and are 31 7/16 in. long. Choose the proper replacement axle for your truck, and trust Hurst Engineering for your truck axle needs. Key features: * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 31 7/16 in. long for a direct replacement * Fits 8.875 in. GM truck 12-bolt * Available for 5 x 5 in. and 6 x 5.5 in. lug patterns
Not Yet Reviewed
$277.95
$152.95
On Sale
Everyone has different needs for their truck. One of the most dramatic changes you can make to a vehicle are the rear ring and pinion gears. Whether you are going for aggressive low-end response for performance and towing, looking to make your truck a highway cruiser, or you've made a change to your wheel and tire size, Hurst ring and pinion sets are available to assist with the transformation. They offer gear sets ranging from 3.08 to 4.56 for the GM 12-bolt rear ends to get you exactly where you need to be. Hurst sets feature high-grade steel for strength and durability along with a gear tooth finish that reduces friction and heat for longevity.
Not Yet Reviewed
$332.95
$183.95
On Sale
Mr. Gasket's chrome differential covers are the perfect addition to your axle. They're made of heavy-gauge steel for durability and excellent gasket sealing. The covers all get a high-luster chrome finish and include a gasket and mounting bolts.
( 15 )
$87.15
$47.93
On Sale
Quicksilver Q4 propellers provide outstanding hole shot, mid-range performance, and superior handling on high-horsepower walley boats, center consoles, and stern drive runabouts. The Q4 features four stainless steel blades, available in both left- and right-hand rotations. Additional details: * Works great on high-horsepower applications, heavy boats, and pontoon boats * Provides exceptional hull lift * Great for outboards and sterndrives * Crosses over to Mercury Revolution 4 * Equipped with PVS (Performance Vent System)
Not Yet Reviewed
$604.54
—
$817.87
$544.09
—
$736.08
On Sale
Quicksilver Thunderbolt propellers are 3‑blade stainless performance units with more blade area for large boats with big V‑6 outboards and V‑8 sterndrives. Ideal for sport/performance style boats as well as cruisers and outstanding on Bravo One and TRS sterndrives, the Thunderbolt propellers are equipped with PVS--Performance Vent System. Offered in several size choices, select the one designed for your engine.
Not Yet Reviewed
$689.66
$620.69
On Sale
Quicksilver Silverado propellers is a general-purpose line of stainless steel propellers offering quality and amazing durability. These 3-blade style propellers will outperform a comparable aluminum prop, and are available in several sizes. Select the diameter and pitch ideal for your boat. Additional notes: * Available in 13- to 21-pitch * Right-hand rotation * Fits most outboards and stern drives
Not Yet Reviewed
$455.66
—
$559.54
$410.09
—
$503.59
On Sale
Quicksilver Flo-Torq propeller hub kits are designed for use with many of the most popular Quicksilver and Mercury props on the water. Quicksilver Flo-Torq SSR propeller hub kits offer quieter shifting and smoother operation than traditional hub kits, while protecting the drive unit from damage. SSR hub kits feature Soft-Shift rubber technology that helps prevent shifting noise and propeller rattle to deliver a quieter, smoother, delivery of your engine's power to the propeller. Each kit includes the thrust washer, SSR drive sleeve, drive sleeve adapter, tabbed lock washer, and locking prop nut.
Not Yet Reviewed
$93.05
$83.74
On Sale
For impressive overall performance and value, the Quicksilver Black Diamond Bravo III is your prop. While Black Diamond aluminum propellers are standard equipment on most boats with Mercury Mariner MerCruiser power, they're also a perfect replacement for all engine brands through the use of the Quicksilver Flo Torq II hub system. Black Diamond propellers are recommended for use on boats with up to 250 hp and with a top speed of less than 50 mph. The high-quality casting and durable high-gloss Phantom Black finish make them easy to maintain and repair. Additional details: * Quicksilver Black Diamond propeller is designed for all boaters using 25 to 250 hp outboards and Alpha One stern drives * Replace your propeller without sacrificing performance with an OEM-grade Quicksilver Black Diamond * Black Diamond propeller can work with most outboard and single-propeller stern drive manufacturers with the Flo-Torq Hub System. * For use with 4-6 hp Mercury engines * Provides the perfect balance of performance, durability and value * Models available for front or rear of 2-propeller systems * Models available for left-hand (counterclockwise rotation) or right-hand (clockwise) * Propellers available in different diameters, blade pitch and quantity (3 or 4)
Not Yet Reviewed
$860.95
$774.86
On Sale
Quicksilver Flo-Torq propeller hub kits are designed for use with many of the most popular Quicksilver and Mercury props on the water. Quicksilver Flo-Torq SSR solid propeller hub kits offer quieter shifting and smoother operation than traditional hub kits, while protecting the drive unit from impact damage. SSR hub kits feature Soft-Shift Rubber technology that helps prevent shifting noise and propeller rattle to deliver a quieter, smoother, delivery of your engine's power to the propeller. Each kit includes the thrust washer, SSR drive sleeve, drive sleeve adapter, tabbed lock washer, and locking prop nut.
Not Yet Reviewed
$114.80
$103.32
On Sale
Quicksilver Flo-Torq Reflex hub kits are the most innovative Flo-Torq systems yet! The Flo-Torq Reflex hub kits are specifically designed for boaters who own 40-60 HP outboards. The Reflex's innovative design relies on flexible nylon fingers, constructed of Noryl GTX - these fingers work together with the advanced composite Derlin hub to flex up to eight degrees. This flexing action of the fingers allows the Reflex hub to quiet annoying rattle and vibration that can be present while idiling at low rpm. Designed to work specifically with Mercury and Quicksilver propellers only. Each Kit Includes: Forward thrust washer Reflex drive sleeve (#8M0047148) Aft Washer Prop Nut
Not Yet Reviewed
$33.43
$30.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
