Availability
Showing In Stock Items. Show All 60 Items.
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
$538.95
—
$655.95
On Sale
Patterned after Hurst's award-winning Quarter Stick shifter, their Pistol-Grip shifters offer a firm, natural grip so you can bang through the gears quickly and comfortably. They feature controlled detent activation, one-hand operated spring-loaded reverse lockout, and a neutral safety switch. CNC-machined from billet aluminum, the Hurst Pistol-Grip handles come with a snap-action switch for roll control, nitrous, or trans-brake activation.
( 52 )
$599.95
—
$649.95
$538.95
—
$583.95
On Sale
The industry standard for over 30 years, Hurst Competition/Plus shifters offer state-of-the-art control for popular 4-, 5-, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track-proven design and reliability, adjustable gear stops to prevent over shifting and prolong transmission life, and an easy-to-follow installation guide.
( 120 )
$573.95
—
$630.95
$515.95
—
$566.95
On Sale
B&M Racing introduces the Precision SportShifter for 2007-18 Jeep Wrangler JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish which houses internal components made from super tough 4140 chromoly. The shift throw has been reduced by 35 percent over the factory shifter along with the detent pressure which has been significantly increased creating a noticeably stiffer shift feel. This was done to address problems with the softness of the factory shifter detent springs which easily pop out of gear while off-roading. The shifter uses the factory shift stick and knob.
( 12 )
$749.95
$673.95
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 94 )
$699.95
$628.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 79 )
$622.95
—
$823.95
$559.95
—
$740.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$861.95
—
$1,451.95
$549.95
—
$812.95
On Sale
B&M Magnum Grip Street Bandit shifters include all of the standard Street Bandit features, along with the new Magnum Grip handle, CNC-machined from billet aluminum. Clean, smooth, and functional, they have just the right look for your street machine!
( 15 )
$774.95
$696.95
On Sale
Are you struggling for traction, or just have some terrible noise coming from the GM 12-bolt in your truck? Hurst limited-slip differentials offer great traction and strength but are not overly aggressive for the street. These differentials are 4-spring, composite, clutch-style, limited-slip carriers with internal gears machined from forged 4320 steel and stronger teeth. Get rid of that old open differential and upgrade to a limited-slip unit from Hurst. Choose the best gear ratio for your truck. Key features: * Fits 12T GM with 30-spline axles * Composite clutches for great drivability * 4320 chromoly spider gears for ultimate durability * Gears are cut to provide the strongest teeth possible in any terrain
( 2 )
$649.95
—
$677.95
$583.95
—
$609.95
On Sale
Hurst Indy universal 4-speed shifters are designed to be used on most popular 4-speed transmissions and a variety of vehicles. Features include: * Narrow spring-loaded gate for easy operation * Heat-treated internal parts * Chrome steel shifter stick * Black shift knob
( 13 )
$580.95
$521.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$573.95
—
$849.95
$515.95
—
$763.95
On Sale
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$649.95
$583.95
On Sale
Get rock-crawling control with the addition of Trail-Gear reduction gears. Lower case gears can provide the enhanced trail performance you want, and these reduction gears are precision-ground and micro-polished to do just that—at an affordable price. Gears, gaskets, seals, and possibly more (depending on the gear set chosen) are available, as well as a choice of spline configurations. Keep your rig in high performance with Trail-Gear low-range climbing reduction gears.
( 7 )
$565.11
—
$826.62
$508.60
—
$743.96
On Sale
Take your trail running and rock crawling experience to the next level with these transfer case adapter kits from Trail-Gear! The adapter plates are CNC-machined from 6061 T-6 aluminum and are designed to allow you to mount one or more gear-driven transfer case(s) in your 1995-2004 2.7L/3.4L Tacoma. These cases are known for their strength, reliability, and configuration flexibility. Oh, the places you can go with quality Trail-Gear components!
( 1 )
$627.06
—
$638.28
$564.35
—
$574.45
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$573.95
$515.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 368 )
$573.95
—
$649.95
$515.95
—
$583.95
On Sale
These B&M Stealth Pro Ratchet shifters' contemporary style and myriad features speak volumes to their functionality. They are the leading choice for 3 and 4-speed transmissions. Easy to operate and install, they come supplied with a 5 ft. super-duty race cable. The B&M Stealth Pro Ratchet shifters also feature: * Lightweight, stealthy black anodized aluminum cover and grip * Single hand-operated reverse lockout feature meets NHRA and IHRA requirements * Stick always returns to center position after shift * Easiest unit to double shift with an air, CO2, or electric shift mechanism * Short throw ratchet action reduces shift time * Supplied with a lightweight brushed aluminum cover * Precision ratchet action works with either standard or reverse pattern valve bodies * Includes neutral safety switch, backup light switch, gear position indicator, and both forward and reverse pattern indicator decals
( 40 )
$599.95
$538.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$749.95
$673.95
On Sale
Extra beef for your rock crawler—Longfield axle shaft and Birfield joint kits put the brawn back into your fun. Stock axles and joints just don't have the strength to deal with larger tires and additional horsepower. Longfield kits furnish you with robust 100 percent chromoly components that are critical for you to "make the grade." So, go where you want, run any trail, and adventure with confidence—knowing your rig's equipped with Longfield axle shaft and Birfield joint kits. Order model designed for your vehicle and axle application.
( 7 )
$604.16
—
$911.42
$543.74
—
$820.28
On Sale
Anyone who wheels hard, rock crawls, or rock races has experienced blown-up trunnion bearings; no matter what size they are using, the bearing is always the point of failure. Trail-Gear Rock Assault trunnion bearing eliminator kits totally displace the bearings with a solid "king pin" style pin that sits in a hardened bushing. The pin and bushing are made from a material considered "bearing quality" because of its high carbon content, giving it extreme hardness. To make sure these pins provide you with smooth steering, Trail-Gear has added zerk grease fittings and machined the pins with grease passages and grooves--so they can be easily lubricated without any disassembly of the steering knuckle. Kits include: * Four steering pins * Four steering pin bushings * Four zerk grease fittings * Two trunnion bearing caps * One knuckle service kit
( 2 )
$586.71
$528.04
On Sale
The latest Tri-Ax shifters from Steeda Autosports are expressly designed for the Ford Mustang. They feature a style that is reminiscent of the venerable "top loaders" of the past, yet they incorporate 20 years of race-proven technology. Utilizing modern materials and machining techniques, these cog-swappers are right on the cutting edge! They offer short throws, precise action, and stop bolts to prevent damage to the transmission and linkage under hard usage. They also offer Steeda's unique 2-position handle height and calibrated internal spring tension to assist you in never missing third gear! The factory steel mounting rail is replaced with a substantial billet beam for more positive location. The shifter base, handle, and beam are all CNC-machined by Steeda from 6061 aluminum. Additional features of these shifters include: * No complicated, unnecessary adjustments * No Dynomat needed to cover up noise * No rubber used on main shifter shaft to wear out * Real stop bolts * No nylon bushing used in pivot to wear out like competitors * Tested to 1.5 million shifts with no measurable wear
( 4 )
$629.95
$564.95
On Sale
Hurst Blackjack shifters locate the shifter handle in the proper location for your application. The Blackjack housings are CNC-machined from billet 6061 aluminum, anodized with a tough black MIL-spec finish, and finally engraved with the Hurst logo in the top plate. Each setup includes a zinc-plated and hardened chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. The classic Hurst chrome flat bar stick and white shift ball for the specified application completes the Hurst Blackjack shifters.
( 20 )
$649.95
—
$749.95
$583.95
—
$673.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$632.95
—
$675.95
$568.95
—
$607.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
