Availability
Manufacturer Rebate
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$664.90
—
$1,372.99
Manufacturer Rebate
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 147 )
$278.99
—
$775.99
Manufacturer Rebate
Dedenbear CO2 bottle kits are just what you need to keep your race car consistent. They include a bottle, bottle valve, bottle regulator with gauges, and a roll of plastic tubing. These kits are made for use with air shifters, throttle stop activation, and some throttle launch controllers.
( 10 )
$289.99
—
$339.99
Manufacturer Rebate
These Powertrax no-slip traction systems are the latest design in traction-adding differential technology. They combine the smooth operation of a limited-slip differential with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring designs reduce the backlash and, therefore, the driveline windup. Only ultra-strength material that is 67 percent stronger than titanium is used. Installation is simple because no ring and pinion setup is required. In addition, no special tools or oils are needed. Step-by-step, model-specific instructions are provided with every kit.
( 81 )
$351.37
—
$864.99
Manufacturer Rebate
Dedenbear CO2 bottle regulators indicate the highs and lows of carbon dioxide pressure. They are adjustable and feature dual gauges for bottle and line pressure reads.
( 1 )
$166.99
Manufacturer Rebate
Dedenbear rpm-activated electric shifter solenoids are specifically designed for the drag strip. They include an electric shifting solenoid and the necessary mounting brackets and hardware.
( 3 )
$209.99
—
$386.99
Manufacturer Rebate
RAM Clutches has simplified clutch selection by offering RAM Concept 10.5 Dual-Disc Organic Complete Clutch Kits that include everything you need for a seamless installation. Each complete clutch kit includes a RAM Concept 10.5 clutch kit, RAM billet steel flywheel, RAM slave cylinder, and flywheel bolts. The Concept 10.5 dual disc organic clutch kits are the logical choice when superb drivability and maximum holding power are needed. Key features of the Concept 10.5 include an increased clamp load pressure plate and larger diameter 10.5-inch premium-faced organic clutch discs. The pressure plate provides a silky-smooth clutch pedal feel, while the larger 10.5-inch discs provide maximum holding capacity when compared to the OEM clutch or other aftermarket kits. The Concept 10.5 unit also utilizes a sprung hub top disc that helps dampen and quiet the initial clutch engagement. A strap driven floater plate design ensures quiet operation. An outstanding driving experience is what you can expect when you choose a RAM Concept 10.5 Dual-Disc Organic Complete Clutch Kit. When only the best will do, choose RAM!
( 1 )
$1,760.00
—
$2,145.00
Manufacturer Rebate
Powertrax Grip LS traction systems are the latest design in differential tech upgrades. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined case. These systems use carbon fiber and steel friction plate technology, delivering streetable and consistent traction. They arrive completely assembled--and because there are friction plates on machined internal gears, they are fully rebuildable. The carriers are the ideal solution for just about any light truck, sport utility, and muscle car on the road today.
( 5 )
$545.99
—
$951.99
Manufacturer Rebate
AutoMeter PRNDL Plus shift indicator gauges measure 2 1/16 in. in diameter and allow you to retain or add turn signals, high-beam, check engine indicators, and gear position for most automatic transmission vehicles. Now, you can match your other AutoMeter performance instruments! PRNDL Plus gauges are available in different color faces and different color bezels. The red LED display clearly shows the gear position, and the 2 1/16 in. diameter allows for easy fitment in most gauge panels or gauge pods.
( 4 )
$197.99
—
$227.99
Manufacturer Rebate
Dedenbear CO2 bottles are direct replacements for the bottles offered in Dedenbear's CO2 kits. They include a bottle valve for an easy swap of your existing air bottle.
( 3 )
$142.99
—
$270.99
Manufacturer Rebate
RAM Clutches has simplified clutch selection by offering RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kits that include everything that you need for a seamless installation. Each complete clutch kit includes a RAM Concept 10.5 clutch kit, RAM billet steel flywheel, RAM slave cylinder, and flywheel bolts. The Concept 10.5 dual disc metallic clutch kits are the logical choice when superb drivability and maximum holding power are needed. Key features of the Concept 10.5 include an increased clamp load pressure plate and larger diameter 10.5-inch premium-faced metallic clutch discs. The pressure plate provides a silky-smooth clutch pedal feel, while the larger 10.5-inch discs provide maximum holding capacity when compared to the OEM clutch or other aftermarket kits. The Concept 10.5 unit also utilizes a sprung hub top disc that helps dampen and quiet the initial clutch engagement. A strap driven floater plate design ensures quiet operation. An outstanding driving experience is what you can expect when you choose a RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kit. When only the best will do, choose RAM!
Not Yet Reviewed
$2,100.00
—
$2,445.00
Manufacturer Rebate
Dedenbear offers a full line of replacement and service parts for your CO2 system, including these bottle valves. They're designed to replace the valve on a CO2 bottle.
Not Yet Reviewed
$56.99
—
$85.99
Manufacturer Rebate
Dedenbear air shifter shut-off valves are bolt-in replacement CO2 solenoids compatible with their CO2 shifters. Available in different styles, they are handy spare components to keep on your trailer for when the unexpected happens. Choose the valve designed for your Dedenbear CO2 shifter.
( 1 )
$103.99
—
$199.99
Manufacturer Rebate
Dedenbear shifter solenoids will make sure your transmission is shifted at the same exact RPM every time down the track. Certain models include an RPM-activated switch that you can adjust with the push buttons located on the switch. Also included is a universal mounting bracket that fits 2-speed Powerglide shifters.
( 2 )
$193.99
—
$516.99
Manufacturer Rebate
Let these Dedenbear CO2 shifters do the shifting for you! They offer a reliable and efficient way to automate shifting in vehicles with automatic transmissions, particularly in drag racing applications. Dedenbear 2-speed and 3-speed CO2 shifters are engineered to make the low to high shift on 2-speed Powerglide transmissions and the 1-2 and 2-3 shifts on 3-speed transmissions. Dedenbear CO2 shifters utilize large, oversize cylinders and high-flow solenoid valves, ensuring quick and precise gear changes. They are designed as direct bolt-on units, requiring no modifications to compatible shifters. Simply bolt the assembly to the shifter, plumb the airlines, and attach two wires. All parts are plated for corrosion resistance and a professional appearance. Dedenbear offers their CO2 shifters individually or as shifter kits with options, including CO2 bottles, rpm switches, and different mounting hardware, allowing for customization based on your specific application needs for your vehicle.
( 1 )
$299.99
—
$722.99
Manufacturer Rebate
Dedenbear offers air shifter air cylinder replacements compatible with their own shifters, as well as others. These handy spares provide the reliable repeatability needed for quick smooth gear changes. Select the air shifter cylinder designed for your air shifter.
Not Yet Reviewed
$84.99
—
$153.99
Manufacturer Rebate
Stack Gauges magnetic pickup collars are used in conjunction with data acquisition systems to provide driveshaft speed information. They're designed to fit on the pinion yoke of a rear-end.
Not Yet Reviewed
$123.99
Manufacturer Rebate
Dedenbear CO2 bottle clamps are designed to safely secure a CO2 bottle to your roll bar. These NHRA-legal bottle clamps are made from aluminum with a natural finish, and are available to fit 1.250 in. to 2 in. diameter roll bar tubing.
( 2 )
$55.99
—
$98.99
Manufacturer Rebate
Dedenbear offers these quick-connect fittings for use with your CO2 system. They're available in your choice of sizes and configurations to fit your system needs.
Not Yet Reviewed
$14.99
—
$54.99
Manufacturer Rebate
Clearance
Dedenbear Products has been helping drag racers since 1979. That includes providing accessories and replacement components to keep their products--and you--racing down the track. Dedenbear remote dial-in display cable tee fittings allow you to run two RD1 remote displays from a single controller, so you can present your dial-in on both sides of your car for tracks with different tower locations. These tee fittings feature positive lock connectors ensuring a solid connection.
Not Yet Reviewed
$23.99
$15.50
Manufacturer Rebate
Clearance
If you are looking for the ultimate in traction, the Powertrax Grip Lok traction system can handle the torque of engines producing up to 550 hp. It combines the fully automatic locking action of the Powertrax traditional locker, with the strength of a fully machined case. Using automatic locking technology, the Powertrax Grip Lok traction system delivers automatic mechanically actuated traction. This system is the ultimate in competition for street, strip, and off-road capabilities.
( 1 )
$715.99
$394.50
—
$1,325.99
Manufacturer Rebate
Dedenbear air shifter solenoids are designed to fit B&M Pro Bandit shifters. They also fit 2-speed Powerglide transmission shifters. These solenoids require the use of an air bottle and an RPM-activated switch, sold separately. If you want accurate and precise shifting, be sure to use Dedenbear air shifter solenoids.
Not Yet Reviewed
$148.99
Manufacturer Rebate
After extensive research, Dedenbear has come up with secondary throttle shaft kits for Dominator Bear Stops. They feature a unique linkage geometry ratio that creates incredible repeatability when using the Holley Dominator carburetor. Now you can retrofit your older Bear Stop with an inexpensive Dedenbear secondary shaft bolt-in kit. Note: All new Dominator throttle stops come standard with this linkage.
Not Yet Reviewed
$108.99
Manufacturer Rebate
Dedenbear's solenoid tubing kits contain the line types required to repair their premium 4-way remote solenoids. They are great spares to have on hand in your trailer in case the unexpected happens. Select the tubing kit needed for your Dedenbear remote solenoid pack.
Not Yet Reviewed
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
