Availability
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$517.99
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,299.95
—
$2,399.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$2,302.95
—
$2,727.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,802.95
—
$3,817.95
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,592.95
—
$2,970.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,873.95
—
$2,763.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$1,299.95
$844.95
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,750.00
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,495.00
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,195.00
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
—
$1,685.00
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,816.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
Inland Empire Driveline high-strength un-welded driveshaft assemblies are perfect for custom applications. Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something. These 3 in. diameter tubes are custom-drawn for consistent strength. Each drive shaft features one welded forged yoke while the other end of the driveshaft is designed to be cut to length before welding the yoke on. Upgrade your ride with Inland Empire Driveline high-strength un-welded driveshaft assemblies.
Not Yet Reviewed
$561.80
—
$671.57
Moser Engineering MO875 fabricated axle housings are made to withstand the demands of high-horsepower applications, but also add serious style to the back of any show car. MO875 housings are constructed from 1/8 in. mild steel with a 3/8 in. thick faceplate, plus internal gussets and bulkheads that contribute to an axle housing capable of the harshest racing conditions. They come available in stock housing lengths for A, B, and E-body applications, plus a 58.0 in. model that can be cut to length for custom applications (Mopar-style housing ends are included).
Not Yet Reviewed
$1,107.00
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$5,314.00
On Sale
McLeod Soft-Lok clutch assemblies are the most widely used of all their assemblies. These units are NHRA and IHRA record holders and meet the demands of the most powerful engines, while offering superb holding power and complete adjustability. The secret behind the McLeod Soft-Lok clutch assemblies is their low static pressure, which results in light pedal effort with soft clutch engagement. This allows a vehicle with up to 1,200 hp to leave the starting line harder without excessive tire spin, while maintaining enough holding power for the rest of the run.
Not Yet Reviewed
$1,975.00
Moser Engineering replacement alloy axle shafts feature high-quality materials that can stand up to everyday use. They use the finest alloy for these replacement shafts, giving you a custom alloy shaft that has been induction heat-treated, 100 percent magna-fluxed, and has a hardened bearing seat for years of worry-free use. Available for passenger car, truck, and SUV applications, Moser Engineering replacement alloy axle shafts are the perfect fit for your vehicle.
( 56 )
$255.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
