Availability
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$7,051.99
—
$8,796.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$4,271.99
—
$6,465.99
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,749.99
—
$12,237.99
Make your animal of an axle even better with Artec Industries AAM 11.5 rear axle trusses. These heavy-duty truss systems reinforce your American Axle Manufacturing axle to take on serious abuse, while also providing a flat surface to mount your upper links. The 3/8 in. thick truss top and 1/4 in. thick gussets incorporate a unique design to strengthen both the axle and the link mounting surface. Artec trusses feature a low-profile so your link joints can be mounted with the ideal geometry, and they allow for a selection of pinion angles. Support your AAM 11.5 rear axle with Artec Industries trusses.
Not Yet Reviewed
$399.99
More strength is a good thing! Artec Industries Dana 60 rear axle trusses beef up your axles to handle all kinds of abuse. They're built from 3/8 in. thick truss tops with 1/4 in. thick gussets to strengthen both the axle and the link mounting surface. The trusses span the entire length of the axle with their low-profile design that allows link joints to be mounted with ideal geometry. Install complete reinforcement that bolsters your axle's performance—Dana 60 rear axle trusses from Artec Industries.
Not Yet Reviewed
$389.99
Fortify your Jeep's axle housing with Rough Country heavy-duty truss and C-gusset kits. These durable, solid-steel protective armor kits give your axle incredible strength and rigidity to withstand the weight loads associated with larger tires and aftermarket accessories. Each kit features ultra-durable steel panels that are laser-cut for an exact fit to your vehicle. Once installed, this unique armor system ensures the utmost strength to protect your axle tubes from bending even under pure off-road torture. The low-profile design is engineered to allow the maximum suspension up travel in a strong, sleek build. Also included are upper and lower C-gussets with reinforced plates and internal spines that offer incredible rigidity to the inner C knuckles on your front axle. This innovative design with internal reinforcement and wrap-around sides offer superior protection no matter what the trail dishes out. Benefits and specs: * Helps prevent axle binding * Durable 3/16 in. steel side panels * 1/4 in. steel top spine and internal gussets
Not Yet Reviewed
$119.95
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$5,025.95
Artec Industries Ford 60 front hydro ram mount and axle trusses deliver strength and protection. One of the most vital and expensive components of your vehicle is your steering. These unique Artec trusses place your ram in its most affective and strongest location--close to the axle centerline--and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end on the axle tube, providing not only a location for mounting your 3 and 4-links, but they also create true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Ford 60 front hydro ram mount and axle trusses. Other features: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which also further protects your ram from trail damage * Ram mount and gussets feature drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow for easy removal of gears. Skid plate is bolted using included countersunk bolts, which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Includes additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$709.99
—
$749.99
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$379.99
Need reinforcement? Artec Industries Ford 9 in. rear axle trusses support and strengthen your rig's rear-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. They're able to nearly fit any 9 in. housing--whether slightly offset or centered, the fit is still universal. Simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle for complete fortification. Artec Industries trusses bolster your Ford 9 in. rear axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$229.99
Artec Industries Chevy 60 front hydro ram mount and axle trusses deliver strength and protection. Some of the most vital and expensive components involve your steering. These unique Artec trusses place your ram in its strongest and most affective location—close to the axle centerline—and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end of the axle tube, providing not only a location for mounting your 3 and 4 links, but also creating true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Chevy 60 front hydro ram mount and axle trusses. Other features: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which further protects your ram from trail damage * Ram mount and gussets include drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow easy removal of gears. Skid plate is bolted using included countersunk bolts—which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Includes additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$699.99
Artec Industries Dodge 60 front hydro ram mount and axle trusses deliver strength and protection. One of the most vital and expensive components of your vehicle is your steering. These unique Artec trusses place your ram in its most affective and strongest location--close to the axle centerline--and protect it from rocks with an integrated 1/4 in. thick skid plate. These 3/8 in. thick trusses extend end-to-end on the axle tube, providing not only a location for mounting your 3 and 4-links, but they also create true reinforcement of the axle itself against bending and shearing. Fortify your rig to take on serious abuse with Artec Industries Dodge 60 front hydro ram mount and axle trusses. Other features include: * Truss is low-profile, allowing link joints to be mounted with ideal geometry * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Truss is tied into ram mount with a 1/4 in. thick bridge, which also further protects your ram from trail damage * Ram mount and gussets feature drainage holes for easy cleaning and reduced weight * Ram mount incorporates an additional 1/4 in. thick bolt-on skid plate in front of differential to allow for easy removal of gears. Skid plate is bolted using included countersunk bolts, which hold up to trail damage better than other style bolts and don't get hung up on obstacles. * Clearanced to use with rotated knuckles and pinions. * Additional 1/4 in. thick gusset for welding removable skid plate to an aftermarket mild steel differential cover
Not Yet Reviewed
$749.99
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$3,114.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
