Availability
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$1,778.50
—
$6,166.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 4 )
$598.48
—
$3,058.43
Whether you're an amateur racer or a passionate motorsport enthusiast, PEM Racing's circle track driveshafts are built to take your racing game to the next level! They're manufactured from quality materials and are available in various lengths and diameters. Replace your weak driveshaft with the strength to perform and enjoy professional-grade performance without breaking the bank with one of these circle track driveshafts from PEM Racing. Select the driveshaft designed for your application needs.
Not Yet Reviewed
$278.99
—
$332.99
On Sale
Exploring off-road trails can be challenging, scenic, and highly pleasurable, but your vehicle's axles and driveshafts are constantly battling enemies intent on breaking them. Spicer Drivetrain Products performance driveshafts come ready for the onslaught, with shafts that are 50 percent thicker than stock and have a smaller diameter for increased clearances. These driveshafts are designed for vehicles with either short or medium lifts and have longer travel slip yokes. They are available either with or without a new transfer case yoke and hardware. Bending a driveshaft on the trail leads to all kinds of issues. For a heavier duty shaft, go with Spicer Drivetrain Products performance driveshafts.
( 3 )
$848.99
$764.09
—
$1,819.99
VEGE Remanufactured drive axle assemblies enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured drive axles with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include steel axle shafts, third member, ring and pinion, wheel studs, bearings, and seals. Includes fluid. Hundreds of models are available, for fitment on countless 4WD, AWD, and RWD applications.
( 4 )
$1,494.99
—
$2,541.99
Stock rear-ends are typically built with a non-floating design--and because your wheels are bolted to the axle, if the C-clip fastener or axle happens to break, you could lose a wheel. By contrast, Allstar Performance 9 in. floater housing kits are a safer and more versatile replacement option. These steel stock housings are available in a variety of widths, centered or offset. They're jig-welded for proper alignment and feature a differential center section and wall axle tubes with spindle pins, plus gear case mounting studs and fill and drain plugs. (Depending on the kit you order, additional components may be included.) Select the size needed for your application, and then improve your axle setup with a floater housing kit from Allstar Performance.
Not Yet Reviewed
$499.99
On Sale
What's better than Trail-Gear Rock Assault 9 axle housings? Rock Assault 9 with Trail-Gear's true, full-float, 35-spline axle shafts! These shafts are manufactured from heat-treated 4340 chromoly and feature a tapered design that allows for more yield during extra torque load, letting them flex without breaking. Of course, the Rock Assault 9 axle housings are complete welded assemblies from flange to flange, including the unit bearing pockets and inner housing seals. And now, these strong axle housing include the strength of their axle shafts, making it even easier to upgrade your build. Get ready to rock on with Rock Assault 9 axle housings with shafts.
( 1 )
$1,599.99
$1,359.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$1,309.99
—
$2,364.99
RevMax Stage 5 billet triple disc torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The use of their billet piston inside the converter allows the clutch to apply fully without flexing. Even with this piston, these triple disc converters are nearly as smooth as your original stock single disc. All Revmax Stage 5 converters have no horsepower or torque limits—they dare you to break them! Give your ride the powertrain it deserves with an assist from the RevMax Stage 5 billet triple disc torque converter best suited for your application. More product features, items, and specifications include: * CNC-machined billet one-piece front cover * Raybestos or Alto high-performance triple-disc lockup friction * Billet lockup apply piston * Proprietary CNC-machined stator designs * Billet bearing cap * Dual Torrington bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace-brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak tested * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.
Not Yet Reviewed
$1,549.00
On Sale
Trail-Gear assembled Super Finish third members are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. They include all new parts and are ready to drop into your axle with top-quality Super Finish 29-spline ring and pinion gears, and your choice of locker. The ring and pinion gears are treated with the REM Isotropic Super Finishing (ISF) process, which removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra. This means that there is less friction between the gears, reducing wear by 95 percent, and allowing the gears and bearings to run cooler and last longer. Select the ideal kit for your application. Additional features and benefits: * Fully built Super Finish 3rd members--all new parts--no used housings or internal components * 29-spline pinion spline is 7 percent larger in diameter than the 27-spline for increased strength * Available in 4.88 and 5.29 ratios for 4-cylinder, V6, and high-pinion applications * Gear teeth are cut using Gleason CNC hobbing machines and cutters * No break-in period * Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements * Dust shield pre-installed onto flange * High-pinion sets also include a high-pinion oil slinger * V6 units feature larger OEM-style V6 gear sets with a longer pinion gear * Trail-Safe pinon seal and nut included * Flange is quadruple drilled with popular Pickup/4Runner and Tacoma patterns: -- 66mm x 66mm x 11mm (Tacoma) -- 60mm x 60mm x 10mm (Pickup/4Runner and TG heavy-duty driveline) -- 60mm x 68.3mm x 10mm -- 61.5mm x 70mm x 10mm Notes: * Requires ring and pinion setup kit to complete the installation into your existing differential housing * For Toyota 8 in. solid axles only. Will not fit 7.5 in. IFS front axles.
Not Yet Reviewed
$1,998.17
—
$2,987.69
$1,855.29
—
$2,586.54
Manufacturer Rebate
GearStar Ford 6R80 Level 4 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 750 crank horsepower or 700 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, billet intermediate shaft, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 4 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 4 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$9,745.00
Bowler Performance Carbon Edition manual transmissions offered are the Tremec T-56 Magnum 6-speed and the TKX 5-speed. These hand-built blueprinted assemblies allow for higher rpm shift points under heavy-torque loads, and are the perfect solution for any serious track car or enthusiast looking for the best possible shift feel and performance. Magnum T-56 6-speed is rated to handle a tire blistering 700 lb.-ft. of torque, and features a single rail shifter design, 3-piece synchronizer assemblies, three shift lever locations, multiple gearing options, and weighs in at 135 lbs. TKX 5-speed has 600 lb.-ft. of torque capacity and is capable of engine speeds of 8,000 rpms with shifts at 7,500 rpms. It is available in multiple gear ratio configurations. Converting your hot rod to a 5-speed or 6-speed is a fantastic way to add overdrive and give yourself the ability to drop the engine rpms and increase your mpgs, which makes owning and driving your prized car much more enjoyable. Choose the desired Bowler Carbon Edition transmission for your vehicle. Benefits of the Bowler Performance Carbon Editions: * Reduced operating temperatures * Reduced torque loss/improved rotating efficiency * Increased gear and bearing life * Reduced vibration and noise * Reduced lubrication requirements * Improved shift feel * Eliminated break-in run-in requirements * Dyno tested The 5- and 6-speed features: * REM ISF finished gear set * REM ISF finished shift rails * Updated aerospace polymer fork pads * Updated carbon block rings * Gray coated finish helps dissipate heat The 6-speed also offers: * Updated second gear * Upgraded 1-2 synchronizer hub * Nightstick billet shifter * Upgraded carbon fiber lined blocker rings in all gears, even reverse
Not Yet Reviewed
$5,649.99
—
$11,000.99
Manufacturer Rebate
GearStar GM 4L70E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 500 crank horsepower or 500 crank foot-pounds of torque. These transmissions feature a 15-pin main harness connector that's designed for factory GM applications from 2008+ or other standalone transmission controllers that utilize the input shaft speed sensor. They come with Raybestos Stage 1 frictions, hardened sun shell, expanded capacity input drum with reinforcing sleeve, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$5,145.00
—
$5,645.00
Manufacturer Rebate
GearStar GM 4L85E Level 5 Pro Series transmissions come with a custom billet Yank Performance multi-disk lockup torque converter. These transmissions feature a Reid Racing SFI 4.1 certified transmission case, and Reid Racing SFI 30.1 certified bellhousing for either Chevrolet, Ford small block, Ford modular, or Mopar small block/ Gen III Hemi applications. They also include a Reid Racing tailhousing for either a bushing or bearing depending on your application. Each transmission is rated for applications that are making up to 2,000 crank horsepower or 1,900-foot-pounds of torque. Level 5 Pro Series units feature: heavy-duty 5-pinion front and rear planetary gear sets, billet direct drum with a 36-element oversized sprag, upgraded input, main, and output shafts, extra capacity 2nd gear clutch assembly, extra capacity 3rd gear super drum with wide heavy-duty sprag and modified plates, custom machined billet forward and direct drum pistons, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$21,545.00
Manufacturer Rebate
GearStar Ford E4OD/4R100 Level 4 transmissions come with a custom billet Yank Performance multi-disk lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 650 crank-foot pounds of torque. This is a perfect option for heavy towing applications, featuring expanded capacity forward, direct, intermediate, and overdrive clutch packs. Level 4 units have a hardened drive shell, high volume pump, custom-machined intermediate and overdrive pressure plates; and they include a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Select the model with options preferred for your vehicle.
Not Yet Reviewed
$9,595.00
Manufacturer Rebate
GearStar GM 4L60E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to small block or big block Chevrolet style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series units come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, upgraded hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors, and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
Manufacturer Rebate
GearStar GM 4L65E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to LS style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series transmissions come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
Manufacturer Rebate
GearStar GM 6L90E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance and durability but longevity as well. These units come programmed with a VIN number that will work with most aftermarket transmission controllers. If this is going into a stock application, GearStar has the ability to program the transmission with your VIN number to ensure it's a direct replacement. The next upgrades for this transmission are expanded capacity performance clutch packs. Level 3 transmissions come with all new electrics, including the wiring harness, internal computer, all sensors and solenoids—along with all new bushings, bearings, and seals. To help with durability and performance, the transmissions come with a billet pump rotor, billet 4-5-6 clutch hub, hardened and reinforced clutch hubs, and a hardened rear planetary gear assembly. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the transmission, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$8,945.00
—
$9,445.00
Manufacturer Rebate
GearStar Ford 6R80 Level 3 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 650 crank horsepower or 650 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 3 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 3 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$8,745.00
Summit Bucks
ACDelco driveshafts are designed to replace your factory originals with no modifications. They're manufactured from quality materials and have the stock connections for an easy bolt-in fit. These driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 6 )
$415.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
