Availability
Showing In Stock Items. Show All 195 Items.
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$939.99
—
$1,279.99
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 53 )
$318.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,350.00
—
$1,750.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
—
$1,576.75
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 68 )
$1,899.99
—
$6,190.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 16 )
$689.99
On Sale
Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
( 2 )
$1,799.95
$1,618.95
—
$1,899.95
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
Bowler Performance GM LS T-56 Magnum 6-speed transmission packages are designed, tested, and built for the aftermarket. The Magnum offers a "no compromise solution" for your hot rod project, and is rated to handle tire blistering torque. Weighing in at 135 lbs., the T-56 features a single rail shifter design, 3-piece synchronizer assemblies, and three shift lever locations. Choose the Magnum model with the gear ratios you prefer. Packages feature: * T-56 Magnum 6-speed transmission * LS aluminum bellhousing * OE LS throwout bearing/hydraulic slave with -4AN inlet and remote bleeder * Flywheel, clutch, bolts * Billet 31-Spline 1350 Series slip yoke * Dial indicator plate for concentric bellhousing alignment * All-in-One harness with reverse lock-out control module * Energy Suspension mount * 4 qts. of Royal Purple Synchromax fluid * 12-month warranty
Not Yet Reviewed
$6,742.99
Clearance
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$277.99
—
$1,060.99
On Sale
Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit makes installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt
( 1 )
$481.95
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,077.00
—
$2,481.00
On Sale
Holley offers complete T56 transmission installation kits for a variety of engine applications. These kits come complete with everything you need to bolt a GM-style Tremec T-56 or Magnum transmission to almost any Gen III or Gen IV small block Chevrolet engines with a 6- or 8-bolt flywheel. Built with a mixture of Holley's best brands, including Lakewood and Hays, each kit includes a bellhousing, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, roller pilot bearing, and all hardware needed to install these components. * Kit 319-510 is set up to be used with the 6-bolt flywheel LS engines, which are the majority of the Gen III and Gen IV engines produced before 2009 (LS1, LS2, LS3, LS6, LS7, LM7, LQ9, L33, and similar truck engines). * Kit 319-511 is set up to be used with the 8-bolt flywheel LS and Gen V LT engines that come after 2009 (LSA, LT1, LT4, L83, and similar truck engines). Product features: * Lightweight cast aluminum bellhousing and stamped steel dust cover provides factory-like installation and appearance * Billet steel flywheel for light weight (28 lbs.) and additional strength * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * 26-spline, 12 in. organic sprung clutch offers superior clamping force and smooth engagement for engines up to 550 naturally aspirated horsepower (500 with power adder) * Adjustable hydraulic release bearing offers reduced pedal effort and easy installation * Works with original equipment or MSD high torque starters * All hardware included (flywheel, transmission, and engine connections)
Not Yet Reviewed
$1,449.95
$1,303.95
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
For all of your driving needs, you'll enjoy the strength and feel of FTI Performance Diesel BA Series torque converters. These units include billet front covers, heavy-duty sprag modifications, and furnace-brazed and TIG-welded fins. Their single disc works great for everyday driving and moderate towing. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and when you can keep your right foot under control, better fuel mileage! Give your pickup truck the power to control your ride with an FTI Performance Diesel BA Series torque converter. Order the model recommended for your transmission application.
Not Yet Reviewed
$859.00
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High-quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street, or at the track. Order the kit recommended for fitment on your vehicle.
( 16 )
$499.99
Chevrolet Performance SuperMatic torque converters are tailored for performance. Designed for their crate engines and transmissions, these torque converters are built to match the power outputs of the engines and to help ensure optimal performance of your powertrain system. Your project is different than the next guys but Chevrolet Performance SuperMatic torque converters bring together your application for durable factory-engineered performance that will have you cruising in no time! Features include: * Steel billet front cover * Custom stator * Fully furnace-brazed pump and turbine * Heavy-duty lock-up clutch * Internal components static balanced * Fully vector balanced as an assembly
( 1 )
$1,127.36
—
$1,130.05
Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit includes limited slip differential making installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt * Kits include axles, limited slip differential, and drum brake assemblies
Not Yet Reviewed
$1,149.95
USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.
( 4 )
$542.99
—
$1,473.99
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$601.99
—
$871.99
Clearance
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,928.99
$1,019.50
—
$2,720.99
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$1,295.00
—
$1,595.00
An upgrade that gets you more mileage per gallon and hubs that are easier to service, Yukon Gear & Axle spin free locking hub conversion kits are an enhancement anyone would want on their 4WD vehicle. Whether you service your vehicle yourself or you have a trusted mechanic, you don't usually like to keep difficult or expensive-to-fix things on your ride. These kits are not only easier to service, they help reduce wear and tear on your drivetrain components. They allow your front axle and drivetrain to disengage when in 2WD, preventing premature wear and improving fuel economy. Yukon Gear & Axle kits are available for various makes and models from the 1980s and up. Features include: * Reduced drag, resulting in greater fuel economy * Replaces vulnerable and expensive factory unit bearing * Kit includes heavy-duty 4340 chrome-moly outer axles * Premium hubs allow driver selectability * Complete kits contain all necessary components
( 11 )
$2,557.99
—
$3,412.99
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$690.99
—
$2,087.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
