Availability
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,100.00
—
$6,100.00
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$5,300.00
—
$7,750.00
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
—
$5,229.99
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,429.99
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$7,599.99
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,197.99
—
$11,544.99
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount
( 2 )
$5,945.00
—
$6,945.00
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 62 )
$5,455.99
—
$6,190.99
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$5,026.99
—
$5,696.99
GearStar GM 4L85E Level 5 Pro Series transmissions come with a custom billet Yank Performance multi-disk lockup torque converter. These transmissions feature a Reid Racing SFI 4.1 certified transmission case, and Reid Racing SFI 30.1 certified bellhousing for either Chevrolet, Ford small block, Ford modular, or Mopar small block/ Gen III Hemi applications. They also include a Reid Racing tailhousing for either a bushing or bearing depending on your application. Each transmission is rated for applications that are making up to 2,000 crank horsepower or 1,900-foot-pounds of torque. Level 5 Pro Series units feature: heavy-duty 5-pinion front and rear planetary gear sets, billet direct drum with a 36-element oversized sprag, upgraded input, main, and output shafts, extra capacity 2nd gear clutch assembly, extra capacity 3rd gear super drum with wide heavy-duty sprag and modified plates, custom machined billet forward and direct drum pistons, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$21,545.00
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford E40D/4R100 Level 3 transmissions are extreme-duty tow-and-go/off-road units with torque converter. They come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 550 lb.-ft. of torque * Heavy-duty, furnace-brazed billet cover multi-clutch lock-up converter * Stall: 1,300 to 2,200 * Master overhaul kit with Alto hardened steels * Raybestos high-energy, high-heat frictions * TransGo heavy-duty reprogramming kit with Gear Command * Filter * New cooler bypass tube assembly * High-capacity 5-plate forward clutch pack * Direct 6-plate clutch pack * Intermediate 4-plate clutch pack * Overdrive 3-plate clutch pack * Steel overdrive planetary gear set * Hardened drive shell * Updated spiral snap ring kit * New kickdown band * Hardened input shaft * 45-element intermediate sprag * New overdrive sprag assembly * High-volume pump assembly with new gears * Steel 6-pinion front planetary * Roller bearing center support * New bushing set * New thrust washer set * Complete Torrington bearing kit * Specially machined intermediate and overdrive pressure plates * Updated late model solenoid pack
Not Yet Reviewed
$8,595.00
GearStar GM 4L60E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to small block or big block Chevrolet style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series units come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, upgraded hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors, and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
GearStar GM 4L65E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to LS style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series transmissions come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
GearStar offers GM 4L65E Level 4 C5/C6 transmissions for a variety of rear-wheel-drive applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. Performance specs: 650 hp and up to 650 lbs.-ft. torque. Transmission details: * Converter: 10 in. custom built lock-up Billet Racing * Stall: 2,600-4,500 * 1,300-2,600 stall available for diesel and 4X4 * Master overhaul kit with alto hardened steels * Raybestos Gen II racing frictions * High-flow filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13 vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * Transgo reprogramming shift kit with shift command * Gearstar full race shift kit * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * Input shaft * High rev spring kit * Heavy-duty 5 pinion front and rear planetary gear set with sun gear * Fully rollerized gear train assembly with sun gear * New Low/ Rev heavy-duty spring and roller with 300M bearing race * Super hold 4th servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount
Not Yet Reviewed
$6,245.00
GearStar offers GM 4L70E Level 4 transmission models for a variety of rear-wheel-drive and four-wheel-drive applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. They're available in different flash stall ratings. Performance specs include: 650 hp and up to 650 lbs.-ft. torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. lock-up Billet Racing * Stall: 1,600-3,600 * Master overhaul kit with alto hardened steels * Raybestos Gen II racing frictions * High-capacity filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13 vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * Transgo reprogramming shift kit with shift command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High rev spring kit * Heavy-duty 5 pinion front and rear planetary gear set with sun gear – AC Delco * 300M hardened output shaft * 300M hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (polished aluminum) * New original equipment steel transmission pan * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$6,145.00
—
$6,645.00
Gearstar GM 4L65E Level 4 transmissions for the GM LT4 engine are designed for strength and durability. Built with heavy-duty and upgraded components, these 4L65E transmissions are able to handle the torque from your custom build. All Gearstar transmissions are custom built by master technicians from start to finish and dyno tested with converter for the equivalent of 100 miles. They do this to ensure the transmission and converter package are in perfect operating condition before they leave the factory. Features: * Maximum 650 hp and 650 lb./ft. of torque * Yank Performance custom billet lock-up compatible torque converter * LT4 bellhousing * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * High-flow filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings,13-vane pump rotor, and stator * 0.500 updated boost valve * Pressure regulator valve * Transgo reprogramming shift kit with shift command * Bushing kit * New thrust washers and complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Heavy-duty 5-pinion front and rear planetary gear set with sun gear * Hardened output shaft and reaction shaft and hub * Super hold 4th gear servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids, EPC solenoid, PWM solenoid, and 3/2 solenoid * New manifold pressure switch * New internal wiring harness and TCC solenoid * New electronic speed sensor * New Original Equipment transmission pan * Transmission mount * Also includes an external transmission cooler, bellhousing bolts, torque converter bolts, and all required fluid
Not Yet Reviewed
$6,245.00
Hughes Performance Pro Street transmission packages are newly redesigned and built to give you the option to choose the transmission and converter package best suited for your needs. The transmission packages come with everything you need—transmission, torque converter, trans cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or you need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
Not Yet Reviewed
$5,307.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
