Availability
Bowler Performance GM LS T-56 Magnum 6-speed transmission packages are designed, tested, and built for the aftermarket. The Magnum offers a "no compromise solution" for your hot rod project, and is rated to handle tire blistering torque. Weighing in at 135 lbs., the T-56 features a single rail shifter design, 3-piece synchronizer assemblies, and three shift lever locations. Choose the Magnum model with the gear ratios you prefer. Packages feature: * T-56 Magnum 6-speed transmission * LS aluminum bellhousing * OE LS throwout bearing/hydraulic slave with -4AN inlet and remote bleeder * Flywheel, clutch, bolts * Billet 31-Spline 1350 Series slip yoke * Dial indicator plate for concentric bellhousing alignment * All-in-One harness with reverse lock-out control module * Energy Suspension mount * 4 qts. of Royal Purple Synchromax fluid * 12-month warranty
Not Yet Reviewed
$6,742.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 61 )
$5,455.99
—
$6,190.99
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,229.99
Manufacturer Rebate
GearStar Ford 6R80 Level 4 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 750 crank horsepower or 700 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, billet intermediate shaft, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 4 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 4 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$9,745.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
—
$7,750.00
Manufacturer Rebate
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
Manufacturer Rebate
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,197.99
—
$11,544.99
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$6,688.99
—
$8,661.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$5,548.99
—
$6,462.99
Manufacturer Rebate
GearStar Ford 6R80 Level 3 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 650 crank horsepower or 650 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 3 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 3 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$8,745.00
Manufacturer Rebate
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford E40D/4R100 Level 3 transmissions are extreme-duty tow-and-go/off-road units with torque converter. They come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 550 lb.-ft. of torque * Heavy-duty, furnace-brazed billet cover multi-clutch lock-up converter * Stall: 1,300 to 2,200 * Master overhaul kit with Alto hardened steels * Raybestos high-energy, high-heat frictions * TransGo heavy-duty reprogramming kit with Gear Command * Filter * New cooler bypass tube assembly * High-capacity 5-plate forward clutch pack * Direct 6-plate clutch pack * Intermediate 4-plate clutch pack * Overdrive 3-plate clutch pack * Steel overdrive planetary gear set * Hardened drive shell * Updated spiral snap ring kit * New kickdown band * Hardened input shaft * 45-element intermediate sprag * New overdrive sprag assembly * High-volume pump assembly with new gears * Steel 6-pinion front planetary * Roller bearing center support * New bushing set * New thrust washer set * Complete Torrington bearing kit * Specially machined intermediate and overdrive pressure plates * Updated late model solenoid pack
Not Yet Reviewed
$8,595.00
Manufacturer Rebate
GearStar Ford E4OD/4R100 Level 4 transmissions come with a custom billet Yank Performance multi-disk lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 650 crank-foot pounds of torque. This is a perfect option for heavy towing applications, featuring expanded capacity forward, direct, intermediate, and overdrive clutch packs. Level 4 units have a hardened drive shell, high volume pump, custom-machined intermediate and overdrive pressure plates; and they include a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Select the model with options preferred for your vehicle.
Not Yet Reviewed
$9,595.00
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$5,100.00
—
$5,300.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
On Sale
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
$7,649.99
—
$9,480.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,429.99
TCI 4x Four-Speed GM automatic transmission packages for externally balanced small block Fords allow you to bolt up your Ford engine to TCI's 4x Four-Speed electronically controlled 4L80E-based transmission or their non-electronic 700R4-based transmission. Bolting right up to your engine like a stock transmission, they make it easy to adapt either of these proven transmissions to any compatible engine by including the exact bellhousing, a special adapter flexplate, pilot adapter, dipstick, and other accessories in a complete package. The 700R4-based transmission uses a Constant Pressure Valve Body to eliminate the need for careful TV cable tuning, the most common cause of 700R4 transmission failure. If you choose the 4L80E-based 4x transmission, these controls are handled electronically by your choice of the TCI EZ-TCU, TCU 2.0, or a factory GM transmission controller. All 4x Four-Speed transmissions are automatic overdrive 4-speeds with lock-up, so simply choose the one that fits your power level.
Not Yet Reviewed
$5,488.95
—
$6,131.95
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$7,599.99
Manufacturer Rebate
GearStar GM 4L60E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to small block or big block Chevrolet style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series units come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, upgraded hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors, and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
Manufacturer Rebate
GearStar GM 4L65E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to LS style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series transmissions come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
Manufacturer Rebate
Gearstar GM 4L65E Level 4 transmissions for the GM LT4 engine are designed for strength and durability. Built with heavy-duty and upgraded components, these 4L65E transmissions are able to handle the torque from your custom build. All Gearstar transmissions are custom built by master technicians from start to finish and dyno tested with converter for the equivalent of 100 miles. They do this to ensure the transmission and converter package are in perfect operating condition before they leave the factory. Features: * Maximum 650 hp and 650 lb./ft. of torque * Yank Performance custom billet lock-up compatible torque converter * LT4 bellhousing * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * High-flow filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings,13-vane pump rotor, and stator * 0.500 updated boost valve * Pressure regulator valve * Transgo reprogramming shift kit with shift command * Bushing kit * New thrust washers and complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Heavy-duty 5-pinion front and rear planetary gear set with sun gear * Hardened output shaft and reaction shaft and hub * Super hold 4th gear servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids, EPC solenoid, PWM solenoid, and 3/2 solenoid * New manifold pressure switch * New internal wiring harness and TCC solenoid * New electronic speed sensor * New Original Equipment transmission pan * Transmission mount * Also includes an external transmission cooler, bellhousing bolts, torque converter bolts, and all required fluid
Not Yet Reviewed
$6,245.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
