Availability
BD Diesel Performance automatic transmissions are designed to transfer the power from high-torque modified diesel engines. They feature redesigned clutch packs with 50 percent more holding surface, steel 6-pin planetary gear carriers, and new lube ports added for high-load areas. Shift strategies and pressure circuits are also modified to handle the high-torque applications. BD Diesel transmissions are not rebuilt factory transmissions--they are custom-tailored to work with your modified truck.
( 1 )
$5,085.00
—
$8,395.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
Chevrolet Performance remanufactured automatic transmissions deliver dependable performance on a budget. These trannies feature quality components built to factory specifications that make your installation easy and the results satisfying. Remanufactured doesn't equate to lack of quality. Back your engine up with remanufactured automatic transmissions and receive the level of performance you expect from Chevrolet Performance.
Not Yet Reviewed
$6,447.35
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$5,100.00
—
$5,300.00
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Engineering that works! ATS Diesel Performance Stage 4 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? That's where ATS Stage 4 packages deliver. They're designed and built with innovative and durable components to give you an edge. All high-stress areas of the case are reinforced, and the external surfaces are sealed. Packages may feature: * Five Star billet torque converter * Viskus clutch drive—modified high performance clutch packs/bands and steels * Extra-deep finned transmission pan for added cooling * Billet 300M input shaft * Co-Pilot lockup controller * Billet flexplate
( 1 )
$6,964.99
—
$9,499.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
ATS Diesel Performance Stage 1 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? These packages are built with ATS Five Star billet torque converters that feature patented Vikus clutch drives. The high-stress areas of the case are reinforced and the external surface is sealed. Plus, the units are fitted with ATS deep pans for increased volume, cooling capacity, and strength over stock. They will perform well in daily use and yet handle extreme power and heavy loads. Racer, puller, or long-hauler, these transmission packages will give you the edge.
Not Yet Reviewed
$5,029.99
—
$5,309.99
TCI 4x Four-Speed GM automatic transmission packages for externally balanced small block Fords allow you to bolt up your Ford engine to TCI's 4x Four-Speed electronically controlled 4L80E-based transmission or their non-electronic 700R4-based transmission. Bolting right up to your engine like a stock transmission, they make it easy to adapt either of these proven transmissions to any compatible engine by including the exact bellhousing, a special adapter flexplate, pilot adapter, dipstick, and other accessories in a complete package. The 700R4-based transmission uses a Constant Pressure Valve Body to eliminate the need for careful TV cable tuning, the most common cause of 700R4 transmission failure. If you choose the 4L80E-based 4x transmission, these controls are handled electronically by your choice of the TCI EZ-TCU, TCU 2.0, or a factory GM transmission controller. All 4x Four-Speed transmissions are automatic overdrive 4-speeds with lock-up, so simply choose the one that fits your power level.
Not Yet Reviewed
$5,488.95
—
$6,131.95
Manufacturer Rebate
GearStar GM 4L70E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 500 crank horsepower or 500 crank foot-pounds of torque. These transmissions feature a 15-pin main harness connector that's designed for factory GM applications from 2008+ or other standalone transmission controllers that utilize the input shaft speed sensor. They come with Raybestos Stage 1 frictions, hardened sun shell, expanded capacity input drum with reinforcing sleeve, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$5,145.00
—
$5,645.00
ATS Diesel Performance Stage 2 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? Stage 2 packages deliver not only the ATS Five Star billet torque converters with patented Vikus clutch drives and deep pans, but also their revolutionary Co-Pilot electronic transmission controller or billet input shaft (depending on your application). All high-stress areas of the case are reinforced, and the external surface is sealed. Racer, puller, or long-hauler, ATS Diesel Stage 2 transmission packages will give you the edge.
( 1 )
$5,334.99
—
$6,389.99
Ford Genuine Parts automatic transmissions are designed to the exact specifications for form, fit, durability and functionality as the factory part on your vehicle. They fit the same as the original because they're made by the original equipment manufacturer. Get the parts you need with the correct fit and performance you expect. Order the genuine Ford replacements for your application.
Not Yet Reviewed
$6,760.99
Manufacturer Rebate
GearStar GM 4L65E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to LS style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series transmissions come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
Manufacturer Rebate
Gearstar GM 4L65E Level 4 transmissions for the GM LT4 engine are designed for strength and durability. Built with heavy-duty and upgraded components, these 4L65E transmissions are able to handle the torque from your custom build. All Gearstar transmissions are custom built by master technicians from start to finish and dyno tested with converter for the equivalent of 100 miles. They do this to ensure the transmission and converter package are in perfect operating condition before they leave the factory. Features: * Maximum 650 hp and 650 lb./ft. of torque * Yank Performance custom billet lock-up compatible torque converter * LT4 bellhousing * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * High-flow filter * New 29 element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings,13-vane pump rotor, and stator * 0.500 updated boost valve * Pressure regulator valve * Transgo reprogramming shift kit with shift command * Bushing kit * New thrust washers and complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Heavy-duty 5-pinion front and rear planetary gear set with sun gear * Hardened output shaft and reaction shaft and hub * Super hold 4th gear servo * Corvette servo * Wide carbon fiber 2-4 band * New valve body spacer plate * New shift solenoids, EPC solenoid, PWM solenoid, and 3/2 solenoid * New manifold pressure switch * New internal wiring harness and TCC solenoid * New electronic speed sensor * New Original Equipment transmission pan * Transmission mount * Also includes an external transmission cooler, bellhousing bolts, torque converter bolts, and all required fluid
Not Yet Reviewed
$6,245.00
Manufacturer Rebate
GearStar GM 4L60E Level 5 Pro Series transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 700 crank horsepower or 700 crank foot-pounds of torque. These transmissions are designed to bolt to small block or big block Chevrolet style engines. They feature a 13-pin main harness connector that's designed for factory GM applications 1996+ or other standalone transmission controllers. Level 5 Pro Series units come with: Raybestos Stage 1 frictions, hardened sun shell, Sonnax Smart-Tech drum and shaft assembly, billet pump gears, super-hold 2nd servo, super-hold 4th gear servo, heavy-duty 5-pinion front and rear planetary gear set with sungear, hardened output shaft, upgraded hardened reaction shaft and hub, and a Transgo valve body reprogramming shift kit with shift command. These transmissions come with all new electrics, including the wiring harness, all sensors, and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$7,445.00
When the name of the game is horsepower, you need an FTI Performance TH400 Level 5 transmission to manage it. Rated up to 2,000 hp, these race-prepped, factory-cased, short-shaft units pack one heck of a punch. Each hand-built case includes a billet aluminum forward clutch hub and pro-mod direct drum, a 36-element sprag, and race material clutches. An FTI billet aluminum full manual reverse valve body provides firm shifts, while tough ER310 material input and intermediate shafts hold them all together. The standard deep aluminum pan holds more fluid for improved cooling. Be ready each race day, equipped with an incredibly strong FTI Performance TH400 Level 5 transmission.
Not Yet Reviewed
$5,349.00
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$5,548.99
—
$6,462.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
