Availability
Showing In Stock Items. Show All 33 Items.
FAST Bump Stager trans-brake controllers provide improved staging accuracy by allowing you to access the patented "transcreep" function found in FAST XFI—without the added expense of converting your vehicle to a full XFI system. Drag racers, like yourself, will be able to carefully pulse the trans-brake, enabling your vehicle to move forward slowly during staging, creating a higher degree of repeatability than racers can achieve manually. The complete Bump Stager kits come with everything needed for use, and a built-in 20 amp driver removes the hassle of wiring an external relay for most applications. They can be used in carbureted applications or with any aftermarket EFI system. Improve your staging accuracy with FAST Bump Stager trans-brake controllers.
Not Yet Reviewed
$604.95
In this corner, weighing in at a svelte 8.2 lbs., are FTI Performance billet aluminum trans-brake valve bodies. These lightweight wonders are so quick, you'll need to add time to your delay box. To eliminate inconsistencies from steel valves in aluminum cavities, FTI uses an adjustable regulator with a steel regulator valve and valve bore. Think safety and include a trans-brake lockout system (not included), preventing accidental engagement during motion. For guaranteed stoppage and incredibly quick release times, buy FTI Performance billet aluminum trans-brake valve bodies.
( 4 )
$529.00
—
$649.00
Don't leave anything on the table at your next race! Step up to a Summit Racing™ billet aluminum trans-brake valve body—and take full advantage of your race car's ability. These automatic transmission units are lighter than OEM steel versions; and their solid design is more rigid than veined factory models, improving strength. Summit™ valve bodies also omit the unnecessary fluid channels found in OE-style units, providing a more direct fluid path. This improves trans-brake performance and shift quality. Increase your transmission performance with the billet aluminum trans-brake valve body recommended for your application. Other benefits: * Achieve maximum torque converter stall * Quicker and more consistent reaction times and 60 ft. times * Prevents engine torque load from transmitting thru drivetrain prior to launch * Trans-brakes perform in much the same way as a manual clutch
( 9 )
$535.99
—
$544.99
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$559.95
—
$854.95
Hughes Performance full manual trans-brake valve bodies allow you to bring your engine to maximum stall without the slightest creep or wheel movement, giving you the best reaction times possible. These trans-brakes come complete and ready to install in your competition transmission.
( 5 )
$605.99
—
$715.99
FTI Performance cast iron trans-brake valve bodies are replacements for automatic transmissions, such as TH400. These are full manual valve body style, with the trans-brake and trans-brake provisions included with each kit. Order the model recommended for your year/make and transmission application.
Not Yet Reviewed
$589.00
ATI's Wicked Quick valve bodies are a direct replacement for your original valve body. These valve bodies shift ultra fast and incorporate an adjustable pressure regulator. Fully 5-axis CNC-machined from billet aluminum, these valve bodies will help your project shed some weight. ATI Wicked Quick valve bodies provide a firm, clean shift. Order the model recommended for your year/make and transmission application.
( 1 )
$649.99
—
$699.99
Take control of your shift points! ATI Compu-Flow full manual valve bodies provide the most accurate and efficient hydraulic controls possible for automatic transmissions. Years of research and testing have enabled ATI to design optimum oil circuitry for all popular transmission applications. The ATI Compu-Flow full manual valve bodies feature eliminated governor and related components, throttle pressure, cables/vacuum lines, and linkages. They are available in forward or reverse configurations, so you can choose what is best for your application.
( 2 )
$579.99
Transmission Specialties billet aluminum TH400 valve bodies use zero OEM stock parts—everything is brand new! Unlike many production builders, TSI's valve bodies are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product each and every time. The valve body has undergone over 40 years of contiguous, rigorous R&D and on track testing. For over 40 years, Transmission Specialties has been the trusted name in the performance automatic transmission industry. They have pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket straight cut Powerglide planetary, TSI is known worldwide for manufacturing the highest quality transmissions and components. Product features: * Billet 6061-T6 main and small valve body construction, no steel * Laser-cut aluminum separator plate * TransGo custom heat treated, USA Made valves * TransGo custom springs * Proprietary hydraulics and worm tracks * Proprietary TransGo Pressure Regulator valve train assembly * Bores are concentric to .0003 in. insuring perfect valve operating * All parts of the valve body are within .001 in. flat and parallel * Micro RA finish ensures zero leaks and maximized fluid movement * Custom bolt pattern eliminates leaks that are common in PG valve bodies * Weighs less than 8 lbs. fully assembled * Ultra-Fast brake release is achieved with our custom hydraulic and plate design * Includes NEW transbrake Solenoid * Includes 17 precision matched reverse release springs * Best fitting and performing valve to bore design in the industry resulting in near perfect vacuum test results * Grade 8 fasteners
Not Yet Reviewed
$563.28
Transmission Specialties billet aluminum Powerglide valve bodies use zero OEM stock parts—everything is brand new! Unlike many production builders, TSI's valve bodies are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product each and every time. The valve body has undergone over 40 years of contiguous, rigorous R&D and on track testing. For over 40 years, Transmission Specialties has been the trusted name in the performance automatic transmission industry. They have pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket straight cut Powerglide planetary, TSI is known worldwide for manufacturing the highest quality transmissions and components. Product features: * Billet 6061-T6 main and small valve body construction, no steel * Laser-cut aluminum separator plate * TransGo custom heat treated, USA Made valves * TransGo custom springs * Proprietary hydraulics and worm tracks * Proprietary TransGo Pressure Regulator valve train assembly * Bores are concentric to .0003 in. insuring perfect valve operating * All parts of the valve body are within .001 in. flat and parallel * Micro RA finish ensures zero leaks and maximized fluid movement * Custom bolt pattern eliminates leaks that are common in PG valve bodies * Weighs less than 8 lbs. fully assembled * Ultra-Fast brake release is achieved with our custom hydraulic and plate design * Includes NEW transbrake Solenoid * Includes 17 precision matched reverse release springs * Best fitting and performing valve to bore design in the industry resulting in near perfect vacuum test results * Grade 8 fasteners
Not Yet Reviewed
$588.88
Hughes Performance full manual valve bodies from are a must for competition applications. They provide full manual control over all shifts and deliver them without delay or time-costly overlap. These valve bodies are used for events where a trans-brake is not needed, such as in tractor pull, monster truck, and other track applications. They're available in both standard shift and reverse-pattern manual valve bodies.
( 6 )
$655.99
Patterned after Hurst's award-winning Quarter Stick shifter, their Pistol-Grip shifters offer a firm, natural grip so you can bang through the gears quickly and comfortably. They feature controlled detent activation, one-hand operated spring-loaded reverse lockout, and a neutral safety switch. CNC-machined from billet aluminum, the Hurst Pistol-Grip handles come with a snap-action switch for roll control, nitrous, or trans-brake activation.
( 52 )
$599.95
—
$722.95
Summit Racing™ nitrous torque converters can make a difference in how your race car performs. Our performance torque converters are rated at 800 hp and are good choices for your nitrous, blower, and trans-brake applications. They feature fully furnace-brazed fins and anti-ballooning plates to strengthen the converters internally for reliable high performance in your application. Some converters are available with a billet cover for added strength and durability. Be more competitive at the strip and get more performance on the street--install one of our Summit Racing™ nitrous torque converters.
( 21 )
$549.99
—
$610.99
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 97 )
$508.55
—
$739.73
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * LS Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * LS Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 10 )
$576.98
—
$690.04
No matter which automatic transmission your street rod or race car has, TCI Diablo shifters have you covered. Using TCI patent pending Diablo technology, the shifters have a fully configurable design that allows the user to set them up to utilize either a front or rear exit cable—and configure them for 2-, 3-, 4-, or even 6-speed transmissions in both forward and reverse shift patterns. There is no longer a need to buy and replace parts if you are changing shift order/configuration, or changing transmissions entirely. The TCI Diablo shifters are also available with an optional 2-button die-cast aluminum handle for controlling nitrous, transbrake, or shift points.
( 17 )
$521.95
—
$597.95
Hughes Performance Pro Series Single Stage torque converter dump valve kits are single-stage complete kits for adding a dump valve to your Powerglide transmission. They offer increased stall speed while staging against the transbrake, faster engine/converter response, and reduced loading against the engine thrust bearing. They can also be applied down-track to help manage engine load and power application to the rear wheels. Hughes Performance Pro Series Powerglide torque converter dump valve kits are also available as upgrades on their Powerglide transmissions.
( 1 )
$653.99
FTI Performance offers torque converter dump valve kits for a variety of transmission applications, including the GM Powerglide. Typically used in drag racing, a properly designed, tuneable dump valve system lowers the oil level in the torque converter by bypassing charge oil back to the oil pan causing cavitation within the converter. This cavitation reduces the forward thrust generated by the converter against the flexplate—which helps to reduce engine thrust bearing wear, increase available stall speed, engine responsiveness and boost response/transition while staging against a transbrake in forced induction applications.
Not Yet Reviewed
$569.00
Reid Powerglide racing oil pumps are 100 percent brand new and complete--not rebuilt! They've been designed from scratch to strengthen and update the Powerglide pump for your racing applications. Features include: * Larger pump gears for more low-rpm volume and pressure * Extra volume to prevent rocking or backing up when transbrake is applied * Stiffer castings with ribs to prevent flexing and pressure loss at high line pressure * High-strength cast iron for maximum rigidity and minimum distortion at high temperatures * Custom high-strength stator support shaft to handle high horsepower * Extra clamping bolts (7 total) to hold pump halves together at high pressure * Redesigned oil pathways to increase flow to converter and cooler * High clutch drum bushing pressure feed * Factory machined for roller thrust bearing
( 3 )
$697.99
ACC Performance Wild Boar Oultlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9 1/2 in. in diameter and have stall speeds ranging from 2,400 to 5,000 rpm.
( 2 )
$753.39
—
$856.37
ACC Performance LS Wild Boar Outlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9.60 in. in diameter and have stall speeds ranging from 2,800 to 4,2000 rpm.
( 1 )
$819.76
Install one of these Hughes hardened input shafts in your transmission and you can be confident that you won't have any twisting or breakage. For high-horsepower and trans-brake applications, Hughes hardened input shafts made from 4340 billet steel will exceed the need.
( 5 )
$532.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
—
$799.95
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 31 )
$598.99
—
$792.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
