Availability
Clearance
Evolution Driveline transfer cases are remanufactured to meet or exceed OEM specifications to provide superior quality with perfect fit and function. Each transfer case passes a comprehensive battery of tests in Evolution Driveline's test center before being packaged and shipped. To enable you to buy with confidence, their computerized test center recreates actual driving conditions to analyze the performance of each transfer case. Evolution Driveline is the first manufacturer to offer hybrid problem-solving transfer cases that marry aftermarket solutions to OE-quality remanufactured products. Additional features: * Problem-solving applications include Jeep transfer cases with slip yoke eliminator kits and GM cases with oil pump wear-savers installed * Backlash, mesh load, leak, and rotational torque quality-control testing is performed on every unit * OEM cores are processed as individual units throughout the teardown and assembly process * Cores are cleaned using UMC ReTech's hydro-blast cleaning and rinse process * All case halves are wet sanded to ensure perfect mating surfaces * Loctite gasket eliminator and primer is used to seal all aluminum mating surfaces * Remanufactured in a ISO9001:2008 USA facility * 12 month/12,000 mile limited warranty
( 1 )
$934.99
$699.50
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 49 )
$505.75
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 81 )
$639.95
—
$741.95
Is your torque converter locked up when the exhaust brake is applied? If not, you're only benefiting from a fraction of its retarding power! Automatically maximize your exhaust brake's retarding power with BD Diesel Auto/Pressure Loc systems! These Auto/Pressure Loc systems command your torque converter to lock up, and stay that way, whenever the exhaust brake is applied in third and fourth gears. Transmission oil temperature stays low since there's no clutch slippage, and engine braking is easier. With BD Diesel Auto/Pressure Loc systems installed, the lock-up clutch and exhaust brake automatically disengage at low speeds, preventing stalling and transmission/converter damage. These systems also increase fluid pressures to help prevent slippage and maintain positive clutch contact.
Not Yet Reviewed
$678.95
Biondo Elite Outlaw "We The People" electric shifters are 100 percent race-ready—and will upgrade the look and functionality of your dragster or door car. These shifters come with an electric solenoid, and feature a hydro dipped Constitutional-themed finish. Choose from models with a 5 ft. or 9 ft. cable. Additional details: * New and improved one-hand operation with positive reverse lockout * Narrow, slim-Line and lightweight design * Size: 10 1/4 in. length x 10 in. (highest point in neutral) x 1 3/4 in. wide * Sturdy and appealing E-Z grip handle * Smooth look with no external screws * Easy installation with easy access and threaded mounting holes * Rear exit cable design * Built-in neutral safety switch * NHRA / IHRA reverse lockout meets requirements * Nicest Powerglide shifter on the market * Also comes with 5 or 9 ft. cable, shift arm, and hardware * This shifter comes with everything needed to mount the cable to the mid-plate, but if you want to mount the cable from the rear of the trans, and to the trans pan, please add the Elite Outlaw trans bracket to your order.
Not Yet Reviewed
$739.99
FTI Performance SB Series torque converters are an excellent choice for mildly modified engines. They work well in street rods with air conditioning, as well as weekend bracket racers. The converters feature Torrington bearings, hardened impeller hub, hub furnaced and TIG-welded fins, high performance clutch lining, and strengthened sprague.
( 84 )
$659.00
—
$719.00
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 2 )
$599.95
—
$728.95
$538.95
—
$655.95
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$538.99
—
$744.99
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
—
$699.99
Summit Bucks
Sonnax heavy-duty remanufactured valve bodies are built to overcome chronic shift and converter clutch apply complaints. It provides firmer shifts and a moderately increased pressure curve to improve performance, especially in truck and towing applications. Numerous Sonnax valve upgrades are included to restore hydraulic clearances that lead to shift complaints, clutch distress, converter complaints and codes, solenoid issues and pressure problems. Line pressure rise has been moderately increased to overcome shift complaints, delayed engagements, and to increase holding power to the clutches. To guarantee the highest level of operational performance, this remanufactured valve body is tested on state-of-the art equipment to verify that solenoid feed, clutch, converter, and line pressures match or exceed OE specifications. Choose your preferred kit packaged for your transmission. The valve body includes the following: * Oversized TCC regulator valve and sleeve, and limit valve spring for firmer TCC application * O-ringed bore plugs and abuse plugs * New accumulator control valve and sleeve with spring * Oversized AFL line up * New forward accumulator piston and seal * New pressure switch manifold * New EPC solenoid * New TCC PWM solenoid Kit contents: * Remanufactured valve body * Separator plate * Upper case gasket plate * Lower valve body gasket plate * 1-2, 3-4 accumulator springs * EPC solenoid harness adapter for 2003 to later units * Sonnax line pressure booster kit
( 3 )
$563.04
—
$582.46
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$799.95
$529.95
—
$749.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$502.16
—
$748.72
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$555.99
—
$1,002.99
$500.39
—
$731.69
Behind the scenes, but still important—McLeod's 1400 Series hydraulic throwout bearings play a special role in the optimal performance of your vehicle. Their most versatile choice to fit most applications, the 1400 bearings slip right over the front collar of your transmission. They're self-adjusting, meaning that you'll never have to adjust them as your clutch wears—and they can be set for the proper mounting clearance needed. The bearings are made of the finest hard-anodized billet aluminum, and equipped with quality elbow swivel fittings and high-pressure stainless steel lines for extreme durability. What happens backstage is just as crucial as what happens out front to bring about a rousing performance. You can't see McLeod 1400 Series throwout bearings as they work, but the part they play is vital to optimize the performance of your mean street or strip vehicle.
( 37 )
$635.00
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$500.40
—
$747.00
TCI automatic transmission front pump assemblies are a direct bolt-in replacement for the stock piece, and they ensure proper fluid circulation and consistent line pressure in many performance applications. These easy-to-install units are precision machined, inspected, and tested for quality. TCI front pumps are available for a variety of transmission types. Choose the model that's designed for fitment on your vehicle.
( 9 )
$556.95
—
$587.95
Bowler Performance Tilton hydraulic master cylinder kits include the components to produce proper pressure and smooth shifting. Each kit contains a Tilton master cylinder, fittings, braided stainless steel line, billet aluminum or plastic remote reservoir, and hardware to attach to OE/factory clutch pedal or Bowler aftermarket pedal. Choose the clutch master cylinder kit designed for your vehicle.
( 1 )
$655.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$525.99
—
$746.99
Ford Performance Parts clutch kits are available in several diameters and a wide variety of configurations to meet the specific requirements of your street, street/strip, or race vehicle. Depending on the application, available features include: * Heavy duty-organic linings * Carbon/copper linings on flywheel side and carbon linings on pressure plate side * Heavy-duty diaphragm kits with approximately 40 percent more capacity than stock clutches * Heavy-duty diaphragm-types with centrifugal assist and approximately 25 percent more capacity than OE units * Stronger covers and revised internal geometry to reduce clutch pedal effort by 10 percent * Nodular iron and cast iron plates * Some installations require new flywheels * Metric fasteners and dowel pins must be used with some clutches * Note: May mix and match Ford Performance Parts clutch discs and pressure plates, but do NOT install a FPP pressure plate with a stock disc or vice-versa as disengagement problems may occur
( 39 )
$559.99
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$500.17
—
$749.16
Hays Classic clutch kits are the original Hays clutch! These conversion kits are the newest 26-spline version in the Hays clutch lineup, and are designed to work in conjunction with a modern 5-speed or 6-speed transmission swap. They feature an organic disc with an upgraded pressure plate for increased holding power over stock. They're designed for stock cars and trucks, or ones with minor performance bolt-ons, such as headers, intake, and exhaust. For clutch kits that are street-friendly, smooth, and reliable, consider the Hays Classic line of clutches—they're a great choice for your favorite muscle car, Jeep, or truck! Order the kit recommended for your vehicle application. Hays Classic conversion clutch kit features: * Includes 26-spline clutch disc for use with most 5-speed and 6-speed conversions * Steel back clutch disc features heavy-duty hub spring assembly for increased load capacity * Great drivability for power levels up to 400 hp * Clutch kit is painted signature Hays Classic orange color * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded pressure plate gives you increased holding capacity over a stock clutch * Clutch kits come complete with pressure plate, disc, release bearing, and alignment tool (unless otherwise noted)
( 1 )
$515.95
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$500.40
—
$742.50
On Sale
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
$573.95
—
$749.95
UMI Performance 1978-88 GM G-Body brake conversion kits include laser-cut UMI conversion brackets, lightweight aluminum hubs, and premium bearings—everything needed to adapt the C5/C6 abutment brackets, calipers, and rotors to the G-Body spindles. The hub features 5 x 4 1/2 and 5 x 4 3/4 bolt patterns and is intended to face mount the C5/C6 brake rotor in exact factory location (front track width is unaffected). Each kit includes premium bearing cups and cones, along with the correct rawhide seal for great performance and reliability. These conversion kits are the choice for UMI's Green Machine and have been thoroughly tested to withstand road race and Auto-X competition. They fit a wide range of Chevrolet, GMC, Buick, Oldsmobile, and Pontiac vehicles from the 1970s and '80s. Kit includes: UMI conversion brackets, driver and passenger side aluminum hubs, correct bearings and seals to mount the C5/C6 calipers and abutment brackets. Additional details: Wheel studs are not included. 1/2 in.-20 threaded studs will be required to complete installation. Determine stud length after choosing wheel and considering offset, whether or not spacers are required, and after determining wheel flange thickness. Kit requires C5 or C6 calipers, rotors, brake pads and brake lines. A detailed list of GM part numbers is included. Now fits Wilwood SLC56 caliper. Does NOT fit Blazer spindle. Requirements: C5 brakes require a minimum of a 17 in. wheel for clearance, while C6 requires an 18 in. wheel. Please research wheel fitment before purchasing.
Not Yet Reviewed
$579.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
