Availability
Showing In Stock Items. Show All 92 Items.
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
$538.95
—
$655.95
FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.
( 64 )
$649.00
—
$799.00
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$556.95
—
$692.95
$501.26
—
$623.66
Summit Bucks
Sonnax heavy-duty automatic transmission output shafts allow energy to be absorbed via their torsional design, reducing peak power loads to critical areas. This, in turn, prevents shaft failure common in certain GM units. These steel output shafts are precision engineered and manufactured for unbeatable performance in high-horsepower street and strip builds. They're available in various lengths, and feature many unique refinements available only from Sonnax.
( 2 )
$722.91
—
$774.01
Don't leave anything on the table at your next race! Step up to a Summit Racing™ billet aluminum trans-brake valve body—and take full advantage of your race car's ability. These automatic transmission units are lighter than OEM steel versions; and their solid design is more rigid than veined factory models, improving strength. Summit™ valve bodies also omit the unnecessary fluid channels found in OE-style units, providing a more direct fluid path. This improves trans-brake performance and shift quality. Increase your transmission performance with the billet aluminum trans-brake valve body recommended for your application. Other benefits: * Achieve maximum torque converter stall * Quicker and more consistent reaction times and 60 ft. times * Prevents engine torque load from transmitting thru drivetrain prior to launch * Trans-brakes perform in much the same way as a manual clutch
( 9 )
$535.99
—
$544.99
Summit Bucks
Sonnax heavy-duty remanufactured valve bodies are built to overcome chronic shift and converter clutch apply complaints. It provides firmer shifts and a moderately increased pressure curve to improve performance, especially in truck and towing applications. Numerous Sonnax valve upgrades are included to restore hydraulic clearances that lead to shift complaints, clutch distress, converter complaints and codes, solenoid issues and pressure problems. Line pressure rise has been moderately increased to overcome shift complaints, delayed engagements, and to increase holding power to the clutches. To guarantee the highest level of operational performance, this remanufactured valve body is tested on state-of-the art equipment to verify that solenoid feed, clutch, converter, and line pressures match or exceed OE specifications. Choose your preferred kit packaged for your transmission. The valve body includes the following: * Oversized TCC regulator valve and sleeve, and limit valve spring for firmer TCC application * O-ringed bore plugs and abuse plugs * New accumulator control valve and sleeve with spring * Oversized AFL line up * New forward accumulator piston and seal * New pressure switch manifold * New EPC solenoid * New TCC PWM solenoid Kit contents: * Remanufactured valve body * Separator plate * Upper case gasket plate * Lower valve body gasket plate * 1-2, 3-4 accumulator springs * EPC solenoid harness adapter for 2003 to later units * Sonnax line pressure booster kit
( 3 )
$563.04
—
$582.46
FTI Performance MR Series torque converters are specifically designed for mud boggers needing an incredibly strong spragless unit without draining the bank. They're ideal for 400 to 1,200 hp weekend runners—and still perform well during occasional races. Features include a forged billet steel front cover, a billet spragless center, a hardened flanged impellor hub, and a steel anti-ballooning plate. Triple Torrington bearings, computer balancing, and furnace-brazed and heli-welded fins add to the list of reliable bulletproof MR Series parts. These converters provide excellent torque multiplication, better heat-dissipating oil flow, and impressive performance. Order the parameters desired and the model recommended for your transmission application.
( 2 )
$799.00
—
$849.00
If you use your ride as both a daily driver and weekend racer, you'll want the strength and reliability of FTI Performance SR Series torque converters. They're engineered entirely in-house at FTI and built to handle above-average power. These units feature TIG-welded furnace-brazed fins, a heavy-duty race sprag, and a hardened steel impellor. SR Series non-lockup converters include Triple Torrington bearings and a billet front cover for extra toughness. Each completed torque converter is pressure-checked and computer-balanced to ensure quality. Order the parameters desired and the model recommended for your transmission application.
( 14 )
$769.00
—
$819.00
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$1,349.95
$515.95
—
$749.95
On Sale
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$559.00
—
$884.82
$503.10
—
$796.34
ACT Sport clutch kits optimize the road to high performance by meshing solid products, outstanding quality, and exceptional value. They're crafted from CNC-machined parts and computer-balanced with no loose pieces to wear out or rattle for quiet, trouble-free operation. These Sport clutch kits with street discs are based on solid engineering principles, affording a clamp load increase of 20 to 40 percent with moderate pedal feel, and many of these new, not rebuilt units are SFI-certified to ensure safety. Get the power of your engine in motion with the smooth, precise feel and longer life of the ACT Sport clutch kits.
( 8 )
$590.00
—
$603.00
Summit Bucks
Failure of the intermediate stub shaft and direct drum are almost inevitable when transmissions are pushed to the limit. To maximize durability and improve clutch capacity in heavy-duty/performance vehicles, Sonnax offers Smart-Tech direct clutch drum and shaft kits, the first upgrade to eliminate every critical weakness. Most failures in these units occur where the direct drum and stub shaft connect. Even other aftermarket upgrades that rely on a heavy-duty shaft will sheer in this area under extreme conditions. Unlike two-piece assemblies, the all-in-one Smart-Tech easily handles the highest horsepower/torque levels. The unique one-piece clutch drum with integrated stub shaft is precision machined from high-strength steel to guarantee there are no splines to strip from the drum or weaken the shaft. The shaft itself is significantly thicker and 2 times stronger than the original. Due to its larger diameter, the integrated shaft must be used with the kit's custom, heavy-duty sun gear. Insufficient holding power is another area where many transmissions fall short, but installing thinner aftermarket steels and backing plates to increase clutch capacity isn't ideal. Those components increase clutch pack flex and heat build-up, making them the primary cause of repeat burn-up. To improve both performance and long-term reliability, the Smart-Tech's custom drum and piston hold an OE backing plate and seven OE frictions for 17 percent more clutch capacity than the six-friction stack-up. Sonnax Smart-Tech direct clutch drum and shaft kits feature: * One-piece design that eliminates weak point where drum splines strip and shafts break * Rugged shaft is 50 percent thicker and twice as strong as OE * Custom drum and piston deliver 17 percent more clutch capacity with optimum protection against burn-up * High-strength drum and shaft are precision-machined from hardened 8620 steel * Unique sun gear is precision-machined from 9310, heat-treated steel
( 1 )
$754.00
—
$770.64
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$526.95
—
$855.95
On Sale
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$699.00
—
$799.00
$629.10
—
$719.10
On Sale
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$558.04
—
$799.00
$502.24
—
$719.10
TCI automatic transmission front pump assemblies are a direct bolt-in replacement for the stock piece, and they ensure proper fluid circulation and consistent line pressure in many performance applications. These easy-to-install units are precision machined, inspected, and tested for quality. TCI front pumps are available for a variety of transmission types. Choose the model that's designed for fitment on your vehicle.
( 9 )
$556.95
—
$587.95
Ford Performance Parts clutch kits are available in several diameters and a wide variety of configurations to meet the specific requirements of your street, street/strip, or race vehicle. Depending on the application, available features include: * Heavy duty-organic linings * Carbon/copper linings on flywheel side and carbon linings on pressure plate side * Heavy-duty diaphragm kits with approximately 40 percent more capacity than stock clutches * Heavy-duty diaphragm-types with centrifugal assist and approximately 25 percent more capacity than OE units * Stronger covers and revised internal geometry to reduce clutch pedal effort by 10 percent * Nodular iron and cast iron plates * Some installations require new flywheels * Metric fasteners and dowel pins must be used with some clutches * Note: May mix and match Ford Performance Parts clutch discs and pressure plates, but do NOT install a FPP pressure plate with a stock disc or vice-versa as disengagement problems may occur
( 39 )
$559.99
Summit Bucks
ACDelco offers transmission bellhousings for a wide range of vehicles from the 1990s and up. Built from aluminum, these GM-recommended replacements deliver the quality and durability of original equipment, plus a factory fit and solid performance. The bellhousings are available for nearly two dozen transmission models. Order the unit designed for your application.
( 8 )
$628.99
—
$659.99
On Sale
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
$573.95
—
$749.95
For high performance parts and excellent workmanship, trust FTI Performance automatic transmission input shaft and drum kits. With options like steel, Ermet, or 300M input shaft and drum kits, FTI has units available for various racing needs.
( 2 )
$679.00
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$602.10
—
$686.70
RAM 7.25 Stock Car Series clutch kits are specifically designed for Circle Track use. They feature a new internal drive mechanism that provides smooth, drivable engagement, a billet aluminum diaphragm pressure plate, a steel floater plate, and a 4-paddle metallic disc design with twice the friction material of other similar units. The discs have an 8-rivet hub assembly for added durability for 6-rivet hub discs. These kits will bolt directly to most existing 7.25 in. flywheels.
Not Yet Reviewed
$699.00
—
$799.00
ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. You've spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.
( 16 )
$592.00
—
$652.00
ATS Diesel Performance flexplates are SFI-approved, meaning that they stand up to the most demanding race application standards. These one-piece units are constructed of strong billet steel, allowing you to shift harder and faster without damage. A great deal of pressure is placed on your flexplate when racing. These ATS parts are able to endure the high-performance situations to increase horsepower to your wheels.
Not Yet Reviewed
$804.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
