Availability
Showing In Stock Items. Show All 21 Items.
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 16 )
$689.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$741.99
On Sale
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$623.99
—
$837.99
$530.39
—
$712.29
On Sale
Exploring off-road trails can be challenging, scenic, and highly pleasurable, but your vehicle's axles and driveshafts are constantly battling enemies intent on breaking them. Spicer Drivetrain Products performance driveshafts come ready for the onslaught, with shafts that are 50 percent thicker than stock and have a smaller diameter for increased clearances. These driveshafts are designed for vehicles with either short or medium lifts and have longer travel slip yokes. They are available either with or without a new transfer case yoke and hardware. Bending a driveshaft on the trail leads to all kinds of issues. For a heavier duty shaft, go with Spicer Drivetrain Products performance driveshafts.
( 3 )
$754.99
—
$848.99
$729.59
—
$764.09
No matter how tough driveline parts are, there's a good chance they'll eventually need replaced. When age, rough terrain, or too much right foot comes to bear, you'll need Spicer Drivetrain Products external spline yoke shafts. These shafts are designed for long-lasting performance and are built to exacting tolerances. They're direct replacements for OEM parts with many upgrades available. For drivetrain components you can trust, use Spicer external spline yoke shafts.
( 2 )
$612.99
—
$697.99
Summit Bucks
Sonnax splined stub and sleeve kits make it easy to build, balance, and service a rugged performance driveshaft. These high performance, heavy-duty kits have unique features to dramatically raise the torque capacity of the driveshaft while guaranteeing hassle-free assembly. Every yoke/stub shaft and splined sleeve is carefully machined from 6061 T-6 aluminum and matched during manufacturing to deliver the most precise and uniform spline fit available. Sonnax also uses more spline teeth than other aftermarket slip and stubs. You can overcome many driveshaft problems by converting from a 2-piece shaft to a one-piece aluminum build outfitted with a Sonnax slip and stub. From eliminating critical failure points to adding great flexibility in customization, they offer the best way to reliably drive horsepower from the engine and transmission to the differential in today's performance vehicles. Kits may also contain boot and boot clamps. For a strong, lightweight and durable driveline ideal for upgrading muscle cars and adapting powertrains to custom street/strip vehicles, select the Sonnax splined stub and sleeve kit designed for the U-joint and tube diameter ideal for your vehicle.
Not Yet Reviewed
$520.53
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 30 )
$761.99
Sierra Marine offers a wide range of watercraft drive unit replacement parts, including U-joint assemblies for various GLM, Mallory, OMC, Volvo Penta, and Mercruiser stern drive applications. Each component is manufactured with factory materials in accordance with OE specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$804.99
On Sale
Clearance
Yukon Gear & Axle differential pinion yokes offer precise fit and strength for many applications. The yokes are manufactured from cast steel, forged steel, billet steel, and aluminum—and are available for fitment on dozens of specific axle applications. Choose the high performance strength of Yukon Gear & Axle differential pinion yokes for your build.
( 85 )
$601.99
$511.69
On Sale
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$761.99
—
$768.99
$647.69
—
$653.64
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
