Availability
Our Summit Racing™ SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Available in several internally and externally balanced applications. NOT FOR MARINE APPLICATIONS.
( 496 )
$51.99
—
$108.99
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 62 )
$76.99
—
$111.99
Summit Racing™ speedometer gear kits are designed to recalibrate the gauge back to normal after changing rear axle ratios or tire diameters from stock. We give you a new "bullet" and a nice assortment of drive and driven gears to accommodate most street gear ratios and tire sizes. All you need to know are the tire diameter and rear gear ratio--and you can dial in the speedometer (and try to avoid those unwanted speed violations). Select the kit that's compatible with your transmission application.
( 17 )
$59.99
Strange heavy-duty U-joint girdles are the ultimate in U-joint retention. Designed to withstand the high stresses of racing and off-road abuse, these fasteners are built using a stud-and-nut method versus the traditional U-bolt. Providing a 360 degree clamping area prevents needle bearing damage and journal brinelling—which translates to less heat and longer life. Features include: * Heat-treated, chromoly steel straps * ETD 150 steel studs * ARP distorted thread, 12-point nuts * Designed for use with Strange pinion yokes
( 28 )
$99.99
Wilwood compact remote flange-mount master cylinders are precision-machined from high-strength aluminum. They're designed for limited space applications requiring the output capacity of a full-size master cylinder. These units can be mounted virtually anywhere for convenient service access. A standard mounting flange provides easy installation in any vehicle.
( 73 )
$106.64
Summit Racing™ Corvette-style servo piston kits allow you to swap out your OEM servo on your 700R4 or 4L60E/4L65E automatic transmission and improve shift quality and firmness. They have a larger piston area which increases band-apply pressure and holding power. These kits are drop-in upgrades and will really firm up the 1-2 shift. Includes both pistons and all necessary O-rings.
( 16 )
$74.99
Summit is proud to offer our Summit Racing™ Transmission Yokes. Built from quality materials these are offered in various Lengths and common U-joint sizes to allow you to replace your bent, rusted, or worn factory yoke or finish up a swap where the driveshaft is just a touch too short. Eliminate that last weak spot in your driveline with Summit Racing™ transmission yokes.
( 59 )
$79.99
—
$85.99
Summit Racing™ steering joints are the perfect components to finish your race vehicle's steering system. Available in steel and stainless steel, these joints feature staked bearing caps to prevent loosening and adjustment malfunction. They're available in multiple shaft and spline types/sizes to suit your application.
( 90 )
$68.99
You can get Summit Racing™ transmission pans in plain or finned styles. We offer stock depth or deep pan styles and come with a drain plug.
( 303 )
$97.99
—
$107.99
Hardcore Super Duty race shifter cables from B&M have less than .015 in. per foot of backlash--up to 50 percent less backlash than competitive cables! They feature rotary swaged ends and are prelubed for smooth operation. These cables are supplied with the Pro Ratchet, Pro Stick, and Pro Bandit shifters, and can be used on all B&M shifters (except Unimatic).
( 149 )
$63.19
—
$103.95
Summit Racing™ bellhousing separator plates are designed for Ford small block engines. These plates are precision-cut from aluminum or steel for durability and also feature special ventilation holes for improved air circulation. They provide the correct fit in small blocks to locate the engine components in just the right place. Summit Racing™ bellhousing separator plates are engineered to work with automatic transmissions, and fit both 157-tooth and 164-tooth flexplates.
( 82 )
$52.99
—
$61.99
Lokar column shift linkage kits simplify connecting your column shift to your transmission. They're fabricated from billet aluminum or steel (depending on application) and are adjustable. The kits include all hardware, including column bushing and rod ends. Order the model recommended for your application.
( 188 )
$118.95
ATP offers replacement flexplates in a variety of sizes, shapes, and configurations. The steel plates are manufactured to exacting tolerance for precise fit. Order the model recommended for your year/make, engine, and transmission application.
( 194 )
$50.79
—
$109.99
Spicer Drivetrain Products axle hub assemblies offer strength and durability to ensure longer life. They are designed, engineered, and manufactured to meet or exceed OE requirements, because they are OE parts, ensuring a perfect fit. Spicer Drivetrain Products is the name you can trust for top performance and durability.
( 18 )
$101.99
The improved design of these Hurst shifter cables incorporates a solid core with helical lay wires wrapped around it for additional strength and durability. Hurst cables have a 303 stainless steel inner wire with 120,000 psi tensile strength. The cores are lubricated with Teflon prior to assembly and then sealed in a heavy plastic outer casing for a lifetime of durability and smooth operation.
( 53 )
$99.95
—
$107.95
Machined from the finest materials, Moser Engineering axle bearings are designed to protect your axles from wear and tear. They're available in a variety of diameters for fitment on nearly two dozen axle models. Choose the style and quantity needed for your vehicle application. With Moser, you can be sure that you're getting a quality product made to the highest standards.
( 192 )
$60.00
—
$98.00
Summit Racing™ LS flexplate spacers are designed to achieve proper spacing when you're installing an older GM automatic transmission to a LS engine. These spacer and bolt kits are manufactured from high-quality steel and correct the crank to transmission spacing differences between LS and early Chevrolet small block engines.
( 26 )
$60.99
These performance shifter cables are supplied with most B&M shifters (except for race shifters). They're properly clearanced to reduce backlash, and are available in several lengths to suit your application.
( 74 )
$71.45
—
$99.95
Summit Bucks
ACDelco GM Genuine Parts flexplates are designed, engineered, and tested to rigorous standards and backed by General Motors. They're true OE parts that will replace your originals with the same fit and performance, and are updated to integrate new materials and technologies. Order the flexplate model recommended for your vehicle.
( 7 )
$54.99
—
$103.99
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 335 )
$98.99
—
$102.99
No one knows transmissions like Sonnax, which is why their primary and secondary pressure sensors work exactly like your OEM parts. Gearbox pressure sensors determine the hydraulic oil pressure in various applications and help to specify the shifting pressure more accurately. This type of sensor may fail to function under hostile conditions or simply wear over time. When that happens, help keep your drivetrain running optimally with the Sonnax primary and secondary pressure sensors designed for your application.
( 1 )
$93.90
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 39 )
$55.49
—
$107.91
Age, miles, and abuse take their toll on drivetrain parts, making rebuilds and new parts a necessity. When you're seeking direct replacements for OEM, you need Spicer Drivetrain Products slip yokes. Spicer products are used in the production of many vehicles and are well-respected for quality, innovation, and value. These slip yokes are produced with the same high standards as the originals for reliable service. When rebuilding a transmission, use the parts that made it great. Go with Spicer Drivetrain Products slip yokes.
( 124 )
$54.99
—
$109.99
Ideal for drag racing, Circle Track, Pro Street, or off-road, these slave cylinders from Wilwood feature a longer-than-normal stroke to ensure full clutch release. Made from billet aluminum for high strength, and plated with a tough anti-corrosion finish, the cylinders are pull-types and have a stainless steel pushrod.
( 21 )
$103.33
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
