Availability
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$78.99
—
$98.99
Summit Racing™ torque converter lockup kits are a simple way to control converter clutch lockup in 4th gear when swapping a GM 700R4 or 200-4R transmission in an early non-computer controlled vehicle. The adjustable vacuum switch will hold the clutch on during steady state cruising and disengage when accelerating or downshifting. Summit Racing™ torque converter lockup kits are available in automatic (+12V applied via vacuum switch) and manual (+12V applied via toggle switch) versions. Choose the one preferred for your application.
( 6 )
$89.99
Listen up, performance enthusiasts—if you prefer automatics, you'll be interested in these torque converter lock-up kits from Chevrolet Performance. They're designed to adapt the 4L60 or 700R4 transmissions (non-electric version) in early-model GM vehicles. These transmission performance kits include a throttle valve spring for carbureted engines, a normally closed fourth gear clutch switch, a wiring connector for the torque converter, and an instruction sheet to facilitate the installation.
( 5 )
$85.70
Keep your lockup kit operating smoothly with B&M torque converter lockup kit components. These replacements, such as the speedometer cable and generator, are designed specifically for use with the B&M torque converter lockup kit.
( 4 )
$55.59
These TransGo torque converter conversion kits are designed to correct converter fluid flow to the primary pump area so the torque converter will stay full under high load conditions. They are designed for use with non-lock up torque converters and will help to increase the reliability of your automatic transmission. Available for multiple transmissions, the TransGo torque converter conversion kits will get your transmission performing correctly again.
( 7 )
$66.56
These TransGo lockup valve kits contain new parts to maximize torque converter life in high-mileage OEM transmissions. They will help your transmission to operate more efficiently and improve overall reliability.
( 6 )
$52.99
—
$64.29
BD Diesel lockup conversion kits convert long soft pulse width modulation (PWM) torque converter lock-ups to short crisp On/Off lockups for longer torque converter life. Features: * Require removal of the transmission for installation * Installation by an experienced technician is recommended * Kits include new On/Off valve assembly to replace OEM PWM valve assembly in pump * Convenient drop in valves, no special tooling or machining necessary * Should be used in conjunction with BD Diesel #1600410 Tugger shift kit
Not Yet Reviewed
$98.95
Max Torque Box Stock/Clone clutches was designed for the Clone engine market. They are very similar to the SS-Series clutch but are able to withstand the rigorous requirements of the Clone racing engine. They are offered in different chain sizes and sprocket tooth counts. Choose the proper Max Torque Box Stock/Clone clutch for your Kart.
Not Yet Reviewed
$56.50
—
$88.99
Max Torque SS-Series clutches are the most popular styles used by the OEM since its introduction in 1970. The clutch comes in many different styles and configurations to meet any OEM requirements. The secret to Max Torque's SS (Six Shoe) Series success is their ability to take heat without ruining the garter spring. The spring is made from 302 stainless steel and it can take more than twice the heat of music wire used in similar clutches. Choose the appropriate one for your Kart.
Not Yet Reviewed
$61.99
—
$97.99
Max Torque universal D-drum clutches allow you to use your aftermarket sprockets on your Max Torque Box Stock/Clone (IK) clutch.
Not Yet Reviewed
$75.99
Summit Bucks
ACDelco GM Genuine Parts torque converter pulse width modulation valves are manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended to deliver the peace of mind that fit, form and function is of the highest standards. Get the factory parts you need from the same source as General Motors with ACDelco GM Genuine Parts. Order the model designed for your vehicle application.
Not Yet Reviewed
$61.99
Dorman automatic transmission torque converter lock-up solenoids are engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles. On certain Subaru vehicles, when varnish buildup or a short circuit causes the torque converter clutch solenoid to fail, the dealership requires replacing the entire valve body assembly. This Dorman OE FIX automatic transmission torque converter lock-up solenoid allows replacement of just the solenoid, instead of the entire valve body assembly, saving you a significant expense.
Not Yet Reviewed
$68.99
On Sale
Clearance
Seals-it torque tube seals prevent rear-end lube from traveling up the torque tube and leaking out the bell. The seals consist of aluminum housings with three O-rings on the outer diameter and two patented, grease-resistant, high-temperature seals on the inside. The housings are available in anodized colors and in four sizes to fit most open wheel race cars.
Not Yet Reviewed
$70.99
—
$78.99
$63.89
—
$71.09
On Sale
Seals-it Torque Ball seals keep the dirt out and the lube in! These neat, simple, and winning solutions from Seals-it will ensure that your Sprint car remains intact by keeping debris and other elemental factors out of the torque ball area. They will not interfere with fast and efficient engine removal, which helps for easy access and installments, plus there is no contact between the seal and crankshaft, so there is no added drag. The rubber seal is bonded by a special process to precision-machined anodized aluminum.
Not Yet Reviewed
$61.99
$55.79
Quicksilver Flo-Torq II propeller hub kits can improve the performance of your Quicksilver propeller. These durable modular hub systems cushion and protect the drivetrain from most impacts. Select the hub kit designed to fit your marine engine.
Not Yet Reviewed
$61.50
—
$69.15
Quicksilver Flo-Torq propeller hub kits are designed for use with many of the most popular Quicksilver and Mercury props on the water. Quicksilver Flo-Torq SSR propeller hub kits offer quieter shifting and smoother operation than traditional hub kits, while protecting the drive unit from damage. SSR hub kits feature Soft-Shift rubber technology that helps prevent shifting noise and propeller rattle to deliver a quieter, smoother, delivery of your engine's power to the propeller. Each kit includes the thrust washer, SSR drive sleeve, drive sleeve adapter, tabbed lock washer, and locking prop nut.
Not Yet Reviewed
$93.05
Max Torque offer kart clutch components for a variety of applications. These parts include: backing plates, crank hardware, driveplates, drums, drum bushings, dust covers, washers, hub assemblies, keys, rotors, shoes, snap rings, weight kits, and more! Order the replacement parts recommended for your vehicle.
( 1 )
$89.99
—
$94.99
Mate your Max Torque clutch with the proper Max Torque chain sprockets. These steel choices are available for all their clutches in several different tooth counts to fit your application needs.
Not Yet Reviewed
$60.99
—
$67.99
Dorman automatic transmission torque converter clutch (TCC) solenoids are engineered and extensively tested to match the exact fit, function, and performance of the stock solenoid on specific vehicle years, makes and models. These Dorman components are a direct replacement for an original part that has failed due to wear or fatigue. They're durably constructed from high-quality materials to ensure reliable performance and a long service life.
Not Yet Reviewed
$56.99
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 188 )
$80.95
—
$89.95
Pioneer transmission overhaul kits are available in four levels: Overhaul, Banner, Master and Super kit. Each of these overhaul kits offer a premium pre-packaged solution for a comprehensive transmission service. The kits include friction clutch plates, steel plates, gaskets, seals, O-rings, pan gasket, rubber lip seals, metal clad seals, sealing rings--and other components specific to the application condition to remedy heavy slipping, such as worn clutches, worn/damaged steel plates, and reseal transmission, due to leaks or disassembly. Order the model designed for your application.
( 3 )
$77.99
Motive Gear offers a full line of manual transmission replacement components. From hubs to shafts, and gaskets to bearings, Motive Gear has what you need for your manual transmission repair or rebuild!
( 25 )
$82.99
Summit Bucks
ACDelco transmission solenoids help restore overall performance with the proper fit, form, and function for your vehicle. They feature high-quality materials and strict design requirements that match OE specifications—critical to ensuring an easy installation and dependable drivetrain operation. Choose the replacement transmission solenoids designed for your application so you and your vehicle can go the distance!
( 5 )
$63.99
Clearance
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 702 )
$165.99
$50.99
—
$99.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
