Availability
Showing In Stock Items. Show All 30 Items.
Lokar column shift linkage kits simplify connecting your column shift to your transmission. They're fabricated from billet aluminum or steel (depending on application) and are adjustable. The kits include all hardware, including column bushing and rod ends. Order the model recommended for your application.
( 189 )
$118.95
B&M Shift Improver kits are the easiest way to get the stout performance you've always wanted out of your automatic transmission. All you need are some hand tools and an afternoon, and you can turn your transmission into a B&M-tuned unit. Each kit has two stages to fit your needs: RV/Towing and Street/Strip.
( 106 )
$85.05
TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools. TransGo even has kits for computer-controlled, 4-speed automatics. Their performance shift kits can be installed with the transmission in the vehicle and they come with complete instructions. Some kits even include a step-by-step video to walk you through the installation process.
( 500 )
$69.19
These TransGo automatic transmission shift valves will provide maximum throttle between the 3-4 gear shift. During highway speeds, the TransGo automatic transmission shift valves will keep the transmission in 4th gear, so there are no downshifts while at cruising speeds.
( 5 )
$63.00
Lokar floor mount cable conversion kits facilitate changing your automatic transmission shifting style from rod linkage to cable operation. These components allow the cable to be routed around obstacles and mounted in virtually any location. When paired with Lokar's durable push/pull 1/4 in. cable and spherical rod ends, your shifter will rise to the next level of performance. Make your conversion an easy process with shift assembly parts from Lokar.
( 5 )
$118.95
TCI TH700-R4 kickdown kits prevent a forced part throttle kickdown from fourth to third gear, to allow cruising at high speeds in overdrive. With the kits installed, the transmission will only kick down from fourth to third at 3/4 throttle.
( 1 )
$95.95
Is your shifter cable worn or damaged? ACDelco GM Genuine Parts shifter cables provide reliable shifting performance. Manufactured from top-quality materials, these shifter cables fit your stock shifter assembly and install in the stock location. They are a GM recommended replacement for your vehicle's original component and are manufactured to offer you the same performance, durability, and service life you expect from General Motors.
( 37 )
$99.99
Service your automatic transmission with quality parts from ATP. Their shifter cables are available for many applications and meet or exceed OE standards. They are offered in more than a dozen lengths and configurations. Order the replacements recommended for your vehicle.
( 63 )
$56.99
—
$67.99
Pioneer offers replacement shifter cables for a wide range of automatic transmission vehicles. When changing gears becomes more difficult or altogether impossible, a new cable may correct the problem. They're made from quality materials with the correct fittings on each end for fitment on specific year/make/model cars and trucks. Match your specs to the Pioneer automatic transmission shifter cable engineered for flawless performance.
( 12 )
$52.99
—
$61.99
Upgrade your automatic transmission with ATP shift improver kits. Sluggish shifts are replaced with faster shifts and the strong performance that you expect from your vehicle. ATP shift kits improve performance and extend the life of your transmission. Make your healthy transmission healthier with the addition of ATP automatic transmission shift improver kits.
Not Yet Reviewed
$64.99
Lokar LED dash indicators will tell you what gear your transmission is in. Made from billet aluminum, these functional accessories offer your truck, street rod, or muscle car a stylish, custom look. Available in horizontal or vertical mount versions, the indicators can be purchased with or without the sensor kit (however, a sensor kit is required for operation). Order the model recommended for your transmission application.
( 16 )
$76.95
On Sale
Know what gear you are in with Classic Instruments gear selector sending unit kits. These kits include a transmission-mounted sensor and interface module that works with Classic Instruments' gear selector gauges or individual LED indicator lights. Features: * Kit includes mounting hardware * Works with most 3- and 4-speed automatic transmissions * Easy push-button calibration * Also works as backup light trigger or neutral safety switch
( 4 )
$178.95
$98.95
Lokar Midnight Series LED dash indicators will tell you what gear your transmission is in. Made from black anodized billet aluminum, these indicators offer your truck, street rod, or muscle car a custom look. They're available in horizontal or vertical mount versions, and can be purchased with or without the sensor kit. (However, a sensor kit is required for operation.) Order the model recommended for your transmission application.
( 2 )
$80.95
Summit Racing™ Corvette-style servo piston kits allow you to swap out your OEM servo on your 700R4 or 4L60E/4L65E automatic transmission and improve shift quality and firmness. They have a larger piston area which increases band-apply pressure and holding power. These kits are drop-in upgrades and will really firm up the 1-2 shift. Includes both pistons and all necessary O-rings.
( 17 )
$74.99
Summit Racing™ Governor recalibration kits allow you to raise or lower, relative to vehicle speed, the points where your transmission shifts. This is accomplished by a system of combining a variety of weights and springs in your governor, modifying the vehicle speed signal your transmission's shift valves receive. These kits can greatly improve the peak performance and enhance the drivability of the vehicle. They are very useful for transmission swaps, or if you have a car that is very light or has a low rear gear ratio. These kits also work great for bracket cars retaining an automatic 1-2 shift.
( 3 )
$87.99
TCI Red Eagle automatic transmission bands are 18 percent wider than original equipment bands, providing greater torque capacity and more positive 1-2 shifts. They feature an anchor area that is extra-thick, heat-treated, and is constructed of high-carbon steel to eliminate the stretching and breakage associated with stock bands.
( 1 )
$89.95
TCI high performance automatic transmission bands will provide greater torque capacity and more positive 1-2 shifts than OEM stock bands. They feature a steel construction and will replace existing bands without any modifications.
( 5 )
$54.95
TCI Kevlar® automatic transmission bands will provide greater torque capacity and more positive 1-2 shifts. They feature an anchor area that is extra-thick, heat-treated, and constructed from Kevlar® to eliminate the stretching and breakage associated with stock bands.
( 15 )
$78.95
Gennie Shifter transmission dipsticks are available for most popular Ford, GM, and Chrysler automatic transmissions. They feature PTFE-lined stainless steel braided housings, anodized aluminum fittings, and OEM-recommended compression fittings (double O-ringed at the transmission). The dipsticks are offered in transmission-mount or firewall-mount styles and provide a clean, stable, universal way to keep up with your hot rod's transmission fluid level—while adding that super attention to detail that Gennie Shifter products are known for. The firewall-mount dipsticks require drilling two holes into the firewall for installation. Order the Gennie shifter transmission dipstick recommended to fit your application requirements.
Not Yet Reviewed
$103.95
These Sonnax 2nd Gear Corvette ratio servo kits provide increased apply area resulting in improved holding power for firmer 1-2 and 3-4 shifts in 4L60 (700-R4) and 4L60-E transmissions. The servo piston features D-rings in place of the OE seal rings for improved sealing during apply and release. They are compatible with Sonnax 4th Gear Super Hold dual servo kits. Sonnax 2nd Gear Corvette ratio servo kits include: * Piston * 2 Piston D-Rings * Housing * Housing O-Ring
( 2 )
$57.53
Lokar backup light and neutral safety switch kits will function as either a single-trigger backup light switch or a double-trigger neutral safety switch. Mounting hardware is included. Order the kit recommended for your application.
( 75 )
$58.95
Sonnax Super-Hold servo kits offer increased apply area over the OEM servo for more holding force between shifts. They are manufactured from anodized aluminum and include mounting seals and hardware for your specific transmission model. Their improved seal design will conserve pump volume.
( 25 )
$91.85
TCI gate plates are bolt-on options to convert your standard-pattern shifter. They will allow for the use of reverse-style transmission valve bodies or switching from a 3-speed to a 4-speed. Best of all, no modifications are required for installation. Order the gate plate recommended for your Chevy, Ford, or Mopar transmission model.
( 7 )
$64.95
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$62.99
—
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
