Availability
Showing In Stock Items. Show All 77 Items.
Bearings and races go together like hamburgers and buns; one isn't complete without the other. Anytime you're replacing bearings, you should also replace the races with units from Crown Automotive. They are designed and built to OEM specs for excellent fit and reliable performance. Their smooth, machined inner surface provides minimal drag for the bearings. When your vehicle's carrier bearings and races need replaced, look to Crown for quality replacement products..
( 1 )
$87.99
Moser Engineering high-quality Timken pinion bearings are the perfect match for Moser Engineering's pinion supports.
( 3 )
$65.00
—
$100.00
Motive Gear differential pinion bearing kits are designed and assembled to make your repair, installation or complete differential overhaul as smooth and trouble-free as possible. These kits include high-quality pinion bearings, crush sleeve, marking compound, a brush, pinion nut, pinion seal, pinion shims and thread locking compound. Order the kit that is best suited to fit your application.
( 2 )
$52.99
—
$80.99
A perfect match for your Strange Engineering pinion supports, Strange offers Timken pinion bearings. They are high-quality units that will make the most of your Strange setup.
( 12 )
$62.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$55.99
—
$91.99
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$55.99
—
$88.99
Summit Racing™ offers cast aluminum differential covers for most case design applications. They feature thick gasket rails to resist oil leaks, as well as cast-in ribs for added strength and heat dissipation. Some models include a drain plug and/or filler plug. Choose from Natural Aluminum with machined rib edges, Black Powdercoated with machined rib edges or Highly Polished finishes. These differential covers include a gasket and mounting bolts for a complete installation.
( 108 )
$92.99
—
$105.99
Rhodes Race Cars rear axle housing ends are offered in most popular styles. Whether you're narrowing an axle housing for bigger tires, or just building a new housing for your street car, you'll need housing ends to complete the project. New forged, CNC-machined housing ends are available separately or on any housing that Rhodes sells. These housing ends accept stock bearings and seals, and are versatile for most applications. For instance, the 8.8 in. Ford ends accept the small 9 in. Ford-style bearing, but still work with most 8.8 in. Ford brake set ups. The Chevrolet ends accept the large Ford-style bearing, but still utilize most Chevy drum and disc brake set-ups.
( 4 )
$90.00
—
$95.00
These Summit Racing™ differential support covers have a heat-treated re-enforced aluminum body which helps keep bearings and ring gears in place. The incorporated, adjustable load bolts support the cap which helps prevent cap deflection and breakage, and also ensures pinion depth and backlash remain correct.
( 196 )
$153.99
Summit Racing™ has just what you need for the fast installation of your ring and pinion and to keep you on budget. Our Basic kits contain differential bearings, front and rear pinion bearings, crush sleeves, pinion seals, marking compound, a brush, and a threadlocker. Get the key components to get the job done with Summit Racing™ Basic ring and pinion installation kits.
( 101 )
$96.99
—
$110.99
Machined on state-of-the-art CNC machines from 1045 chromoly steel, Summit Racing™ mini spools will take racing abuse. They replace the side and spider gears in your factory open differential carrier and lock your axles together for positive traction, making them perfect for Circle Track racing. Summit Racing™ mini spools are recommended for dirt track use only.
( 33 )
$86.99
—
$101.99
Rhodes Race Cars fabricated 9 in. rear-end back braces give your housings extra reinforcement to prevent bending under hard conditions. These RRC braces feature heavy-duty steel construction, and are made specifically to fit their fabricated 9 in. mild steel housings with 3 in. axle tubes, and chromoly housings with 3 1/2 in. axle tubes.
( 5 )
$99.95
Strengthen your differential housing with Summit Racing™ axle housing braces. They are made from steel and are specially-shaped to fit the back of your differential housing. Simply weld them in place and you're ready to go!
( 6 )
$62.99
Our Summit Racing™ pinion supports are CNC-machined from forged 7075 T6 aluminum and then finished with a durable black anodizing. The aluminum construction removes weight from your differential and will accept 28-spline pinions.
( 5 )
$104.99
PEM Racing offers axle drive flanges in different wheel bolt patterns, designed primarily for Grand National hubs. They include a 3/4 in. bolt-on cap, O-ring, and hardware. These drivetrain components transfer power from the axle to the wheels. They're essentially a plate with splines on one side that mate with the splines on the axle—and studs or bolt holes on the other side that allow the wheel to be attached. Axle drive flanges are commonly used on Dana 60 axles and other similar axle types, particularly in off-road applications.
Not Yet Reviewed
$66.99
Complete OE-style axle housing fastener kits that contain most everything needed for your axle housing in one package--Summit Racing™ restoration axle housing fastener kits.
Not Yet Reviewed
$99.99
Summit Racing™ Ultralight spools shave some pounds from your setup. They are crafted from steel but are designed with more lightening holes and a narrower ring flange to weigh in lighter than our full spools, yet will deliver equal power and strength. When weight is an issue, and it usually is, Summit Racing™ Ultralight spools are your solution.
( 1 )
$99.99
PEM's weld-on snouts offer a robust and reliable solution for attaching components to thin metal sheets and are primarily used for repairing or modifying rear axles, typically in racing or performance applications. The snouts serve as a way to attach the axle to the axle tube, often for wider axles or custom builds. They are CNC-machined from alloy steel and have step for axle snout seal, and utilize a welding process to create a strong, permanent bond, ensuring that components stay securely attached. Choose the snouts that match your axle configurations and vehicle requirements.
Not Yet Reviewed
$65.99
PEM Racing offers Wide 5 double-spline solid floater axles for a variety of applications. These steel axles are machined from durable steel and are heat-treated for longer life. They feature 28 or 31 splines on the inner spline, and the 24-spline drive spline fits all standard drive flanges. The axles are available in multiple lengths. * Axles come with 4 in. of inner spline, so they may be cut to length. May cut up to 1 in. off the spline and still have the threaded hole for spacing. * 9 in. Ford floater rear ends and quick changes
( 1 )
$96.99
—
$113.99
Summit Racing™ offers the Circle Track parts that you need, like Grand National drive flange kits. Available in two bolt circles, these axle drive flange kits include a dust cover, O-rings, tapered screws, and Allen head screws. And, as always at Summit Racing™, the price meets your budget. You enjoy racing and we want to help keep you on track with our Circle Track axle drive flange kits.
( 3 )
$77.99
—
$78.99
PEM Racing axle housing back braces are machined from steel, designed for 9 in. Ford rear-end applications. They fit the PEM floater housing with new stamped center housing and 3.00 in. tubes. The parts are manufactured in accordance with factory specifications to ensure proper fit and performance. Braces meet or exceed OE quality standards.
Not Yet Reviewed
$66.99
PEM Racing's standard quick-change gears offer the ability to rapidly adjust gear ratios, allowing for quick adaptation to different driving conditions and track types. This is particularly beneficial for racers and hot rodders who need to fine-tune performance for specific events or situations. For those who regularly need to change gear ratios, quick-change gears can be a more cost-effective solution than purchasing multiple rear ends with different gear ratios. Order the standard quick-change gears for your application.
Not Yet Reviewed
$78.99
—
$104.99
PEM Racing Ford 9 in. bearing kits include premium pinion bearings and races, carrier bearings and races, pinion seal, and pilot bearing. Available in different inner diameter sizes, select the correct kit for your Ford rear-end.
Not Yet Reviewed
$87.99
JOES Racing Products quick-change gear cover fasteners are made from 7075 billet aluminum. One-piece design means no washer to smash or mushroom and fall off. Their cross-drilled design makes them the lightest cover nuts available and allows for safety wiring. JOES quick-change gear cover fasteners are available in sets of 2 or 10.
( 1 )
$64.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
