Availability
Showing In Stock Items. Show All 111 Items.
4x4 Posi-Lok Perm-Lok systems permanently engage the central axle disconnect (CAD) system and couples both front axles. Once installed, the front axles will not pull until the transfer case is engaged. They are ideally suited for fleet operators, and emergency vehicles. Plus, installation is easy and can be completed in approximately 10 minutes.
( 20 )
$94.99
Yukon Gear & Axle Dana 30 disconnect block-off plates are needed when you want to remove your troublesome 4WD disconnect and convert to one-piece axles. These plates are designed to cover the hole in your axle housing left when you remove the vacuum motor. Yukon Gear & Axle Dana 30 disconnect block-off plate kits include: * Block-off plate * Block-off plate gasket * Inner axle seals
( 2 )
$92.99
—
$110.99
Spicer Drivetrain Products front axle stubs are available for a range of applications. These quality-built steel components fit both right and left sides. When you need replacements, these front axle shafts offer a premium, competitively priced option from a name you know and trust—Spicer.
( 8 )
$61.99
—
$99.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 129 )
$94.99
—
$101.99
In late 1980s to mid 90s, Jeep used a vacuum actuator to shift the transfer case and corresponding front axles in and out of 2WD, and high or low 4WD. Crown Automotive 4WD front axle actuators will replace faulty vacuum switches to improve your vehicle's get-up-and-go, no matter the terrain.
( 8 )
$68.99
—
$90.99
Artec Industries 1-ton APEX front differential top caps are included in swap kits with the Daystar bushings or RockJock Johnny Joints UCA brackets, but not with the single adjustable truss upper link mount kits. Artec conveniently offers the APEX front differential top caps individually. These heavy-duty caps are CNC-cut and bent from thick mild steel and will weld directly to the differential casting, allowing the mounting of driver side upper control arm brackets. Choose the one designed to match your vehicle's application.
Not Yet Reviewed
$71.49
—
$76.99
Keep your 4WD working properly with these Standard Motor Products 4WD actuators. They are designed to be direct replacements and meet or exceed OEM specifications. They come available for a variety of applications.
( 4 )
$93.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 218 )
$50.50
—
$113.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 95 )
$56.99
—
$114.99
Crown Automotive axle locker sensors ensure that the axle locks are fully engaged for proper operation. When front or rear axles are locked, both wheels move at the same speed with the same amount of force—for improved handling in slippery or off-road driving conditions. These replacement sensors are crafted from original materials and specs for proper fit and performance. They're used on many Jeep applications with Tru-Lock differentials from the early 2000s and up.
( 1 )
$50.99
You never compromise performance when choosing Spicer direct-fit axle shaft assemblies. Quality materials, precision manufacturing, and controlled testing deliver strong, safe axles that meet high standards—even by OE criteria. So, when you need to refit an axle shaft assembly, choose the direct fit of Spicer Drivetrain Products—assemblies engineered to work together.
( 7 )
$76.99
—
$104.99
Alloy USA differential Perma-Lock kits are designed as replacements for the failure prone OE vacuum disconnect system. They permanently engage the central axle disconnect (Cad) and couples both front axles. Once installed the axles will automatically engage as soon as the transfer case is placed into 4WD.
( 3 )
$81.99
Whether starting a new project or replacing an old part, you'll find what's needed with Spicer Drivetrain Products differential carrier cases. Spicer supplies carriers to many OE manufacturers, so the replacement units are every bit as tough as the originals. They'll accept all factory and most aftermarket internal parts, allowing for modifications. Going mild or wild … Spicer Drivetrain differential carrier cases are the place to start. Order the model recommended for your vehicle and axle application.
( 20 )
$99.99
—
$103.99
When you need parts and components for your American V-Twin, HardDrive can deliver. They offer front and rear axles for a long list of Harley® motorcycles. The steel axles feature a chrome plated finish and will include hardware, as well as spacers where noted. Select the front and/or rear axle designed for your motorcycle.
Not Yet Reviewed
$59.36
—
$104.36
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$52.99
—
$106.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$55.99
—
$109.99
Summit Racing™ offers cast aluminum differential covers for most case design applications. They feature thick gasket rails to resist oil leaks, as well as cast-in ribs for added strength and heat dissipation. Some models include a drain plug and/or filler plug. Choose from Natural Aluminum with machined rib edges, Black Powdercoated with machined rib edges or Highly Polished finishes. These differential covers include a gasket and mounting bolts for a complete installation.
( 108 )
$92.99
—
$93.99
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$58.99
—
$132.99
Motive Gear light-duty axle shafts are designed as direct replacements for OE axle shafts without modifications. They're made from quality materials and heat treated for strength and durability. The axle shafts are available for thousands of vehicles from 1965 and up. They are offered in various lengths, wheel stud patterns, and splines—for different positions and differential case design applications. Experienced installers know Motive Gear and trust them for the best quality and value in drivetrain components. Order the light-duty axle shaft model recommended for your ride.
( 38 )
$65.99
Rebuild the inner workings of your differential with a new spider gear kit from SVL Drivetrain. These assemblies include side gears, cross shaft, thrust washers, and hardware for fitment with most popular carrier applications. Engineered for performance, SVL drivetrain components are backed by the industry leader—Dana. The inner gear kits are engineered and tested to ensure quality case depth, core hardness, microstructure, materials, and coatings. Additional lubrication benefits protect against spinout. Avoid premature failure inside your diff with SVL Drivetrain spider gear kits.
( 5 )
$95.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 69 )
$69.89
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 87 )
$50.50
—
$108.99
Clearance
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$121.99
$81.50
Clearance
Cardone remanufactured CV drive axles have neoprene boots ensuring excellent ozone resistance, which eliminates cracking, a leading cause of boot failure. Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing. High-quality grease withstands high-temperature and pressure extremes, which extends joint life. High-tech grinding machines maintain the original design of the outer housing, race, and cage to guarantee reliable performance. Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles. Their threads are chased to ensure proper fit when the axle nut is installed.
( 26 )
$123.99
$50.50
—
$108.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
