Availability
Showing In Stock Items. Show All 23 Items.
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel wheel hub assemblies come complete with Timken USA bearings and races and a corrosive-resistant coating. In these front hubs, the races will be installed along with new stock size wheel studs, and a new castle nut, cotter pin, washer, and grease cap are included. Each hub is inspected after the races are installed for proper run-out spec to ensure optimal braking performance and no pad knock. Choose the kit specified for your Corvette.
( 2 )
$316.99
Van Steel offers X-Tracker wheel bearing and hub assemblies for a variety of vehicles—including Chevrolet Corvette applications from 2010 and up. These replacement units are manufactured to precision specifications using premium heat-treated high-carbon steel for superior strength and problem-free performance. Order the front or rear model recommended for your vehicle.
Not Yet Reviewed
$399.99
ATI torsional input shafts work like a torsional spring bar--twisting and returning to totally eliminate breakage, while reducing shock loads to the gear train. They are manufactured from top-quality 300M or Vasco for maximum durability. Available for GM Powerglide or TH400 splines, these ATI torsional input shafts will add some reliability to your drivetrain.
( 11 )
$324.99
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
ATI Compu-Flow reverse manual valve bodies shift opposite of the OEM units, away from neutral when up-shifting (P-R-N-1-2-3). There is no automatic shifting. They will remain in the selected gear, allowing street-driven cars to move off in 2nd or 3rd gear in slippery conditions. The governor and related components are eliminated, as well as throttle pressure, cables/vacuum lines, and linkages. All units freewheel if you lift in low gear; there is no engine breaking. (Note--all turbo units freewheel in 2nd gear, except #353400 for the T-350.) These valves are not recommended for the Powerglide, since it must pass through low to get to neutral.
( 1 )
$308.99
On Sale
Transmission Specialties billet aluminum TH400 valve bodies use zero OEM stock parts—everything is brand new! Unlike many production builders, TSI's valve bodies are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product each and every time. The valve body has undergone over 40 years of contiguous, rigorous R&D and on track testing. For over 40 years, Transmission Specialties has been the trusted name in the performance automatic transmission industry. They have pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket straight cut Powerglide planetary, TSI is known worldwide for manufacturing the highest quality transmissions and components. Product features: * Billet 6061-T6 main and small valve body construction, no steel * Laser-cut aluminum separator plate * TransGo custom heat treated, USA Made valves * TransGo custom springs * Proprietary hydraulics and worm tracks * Proprietary TransGo Pressure Regulator valve train assembly * Bores are concentric to .0003 in. insuring perfect valve operating * All parts of the valve body are within .001 in. flat and parallel * Micro RA finish ensures zero leaks and maximized fluid movement * Custom bolt pattern eliminates leaks that are common in PG valve bodies * Weighs less than 8 lbs. fully assembled * Ultra-Fast brake release is achieved with our custom hydraulic and plate design * Includes NEW transbrake Solenoid * Includes 17 precision matched reverse release springs * Best fitting and performing valve to bore design in the industry resulting in near perfect vacuum test results * Grade 8 fasteners
Not Yet Reviewed
$563.28
$535.12
ATP automatic transmission master repair kits enable you to conveniently rebuild and restore performance. They include everything needed to give your transmission new service life—including clutch plates, gaskets, seals, O-rings, and (depending on your application) they may include an oil filter, bushings, or even a vacuum modulator. If you have transmission work to perform, let the pros at ATP furnish the master repair kit designed for your model.
( 45 )
$255.99
—
$323.99
Clearance
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$282.99
—
$310.99
Replace your worn-out or damaged transfer case housing with one of these Dorman transfer case housings. They're made from durable OEM materials, built to factory specifications and tolerances to ensure a direct fit installation. The housings are available for a wide variety of transfer case models, so we're sure to have your application covered.
( 32 )
$258.95
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$316.47
Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.
( 138 )
$186.29
—
$426.99
TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools. TransGo even has kits for computer-controlled, 4-speed automatics. Their performance shift kits can be installed with the transmission in the vehicle and they come with complete instructions. Some kits even include a step-by-step video to walk you through the installation process.
( 507 )
$287.61
These TCI hardened input shafts have increased lubrication, flow, and strength, a resized diameter that provides optimum stress lubrication along the entire length of the shaft, and extended high-gear splines to the oil ring. They will require some minor machining of the stator support.
( 8 )
$298.95
—
$307.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
