Availability
Artec Industries Ford SuperDuty front axle trusses deliver a revolutionary low-profile design. They take the years of race and recreational abuse of Artec's first generation of trusses and add additional strength and functionality. Their key feature is how the truss top now bends around the differential for a better fit and clearance, making them ideal for vehicles needing more up-travel or for those building low center of gravity vehicles. The overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components. Features: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel ram mount and gussets * Precision CNC-cut and bent for great fitment * Truss has super low-profile allowing better clearance for oil pans * Truss spans entire length of axle for complete reinforcement of the axle tubes * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss * Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity * Truss is clearanced for differential breather tube
Not Yet Reviewed
$319.99
Moser Engineering profiled spools are the lightest and most efficient steel performance upgrade spools offered. These differential carrier components will also extend the life of your rear-end by reducing deflection in the case and eliminating the possibility of side gear failure. Order the profiled spool recommended for your axle model.
Not Yet Reviewed
$370.00
The next generation of Artec Industries trusses are here! This low-profile truss design takes the years of race and recreational abuse of first generation trusses—and adds additional strength and functionality. Most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more up travel or those building low center of gravity vehicles. Order the model recommended for your application.
Not Yet Reviewed
$319.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
Meziere true billet flexplates are the superior choice for quality and precision. These key engine components are machined to exacting tolerances from 4340 round bar steel. Meziere's proprietary manufacturing process ensures the strongest gear teeth, the least runout, and best longevity on the market. All of the replacement flexplates are certified to at least SFI 29.2, and they're available for fitment on vehicles from 1955 and forward.
( 20 )
$495.77
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$263.99
—
$532.99
These Fidanza short-throw shifters feature aluminum and hardened steel construction. They are machined using 3-D imaging to get the finest profile for fit and functionality. The shifters can use the stock knob or include a new knob, depending upon your vehicle model.
Not Yet Reviewed
$251.99
—
$367.49
American Powertrain Hydramax master cylinder kits are made ready for you to utilize with existing slave or concentric hydraulic bearings. The clutch units are highlighted by a patent-pending Hydramax bracket which mimics the original clutch rod angle for perfect linear actuation. This well-designed component features an integrated pedal stop, 90-degree adjustability, and a durable nickel finish with a low-profile master cylinder. Also included in the kits, you'll find a model-specific pedal push rod kit, flexible reservoir for remote or local mounting, PTFE-lined steel braided line—plus hardware, lines, and fittings. Order the assembly recommended for your vehicle application.
( 8 )
$359.95
—
$489.95
Tilton 8000-Series hydraulic release bearings offer low-profile mounting. They feature a flush-mount, 2-bolt mounting pattern, along with a constant-contact design for immediate response, and are self-adjusting for clutch wear. Machined from billet aluminum for strength and weight savings, Tilton HRBs also have proprietary low-friction coatings, providing longevity and consistency. Plus, they are incorporated with their unique multi-edged quad-tension seal, to ensure consistent feel, long term wearability, and lasting reliability. Tilton 8000-Series hydraulic throwout bearings are available in multiple configurations to help you get back in the race.
( 1 )
$335.75
—
$361.25
Mevotech offers TTX wheel bearing and hub assemblies for a wide range of applications, from the 1990s and up. TTX parts are engineered with cutting-edge technology to be the strongest, most durable parts on the market. Built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks, these hub bearing assemblies deliver extreme performance. Plus, their innovative Labor Saver designs and hardware make installations faster and easier. TXX components excel in the most demanding operating environments. Order the assemblies recommended for your vehicle. Additional details: * ENGINEERED INTERNALS FOR OPTIMUM PERFORMANCE: Precision-engineered higher grade rolling elements and optimized geometry to minimize rolling resistance and maximize load distribution. * ENHANCED SEAL FOR CONTAMINANT PROTECTION: Low-friction, heavy-duty Advanced Quantum Sealing System with a multi-lip profile that provides layers of defense to keep contaminants out and vital grease in. * PRE-FILLED WITH EXCLUSIVE LUBRICATING TECHNOLOGY: NanoCeramic lubricant withstands extreme temperatures, resists corrosion, and retains viscosity; particles act as microscopic bearings to reduce friction. * ZERO-FAULT WHEEL SPEED SIGNAL: A molded, abrasion-resistant cord guards against perforation and contaminants at the sensor and plug ends to ensure a faultless signal for ABS and vehicle safety systems. * QUICK AND EASY INSTALLATION: Make your installation faster and easier with fastening hardware and torque specifications right in the box. * CORROSION PROTECTION: Repel-TEK anti-corrosion coating is applied to every surface, including studs and hardware, to prevent buildup and contaminant intrusion for a longer part life. * INCREASED PART DURABILITY: Designed with roll forming to lock internal components for a set preload right out of the box; increased assembly stiffness reduces vibration and improves part life.
( 6 )
$259.99
—
$454.99
Get your transmission in gear with one of these American Powertrain White Lightning shifters. They feature a billet aluminum base plate and tower with billet steel center core, plus an independent bias adjustment—an industry exclusive that significantly improves 2-3 shift action and overall shift feel with the simple turn of a screw. Their low-profile design is perfect for increased tunnel clearance, and the short throw action provides for accurate shifts. Dozens of models are available, for universal or transmission-specific applications.
( 9 )
$339.95
—
$425.99
Artec Industries JL/JT APEX front axle armor kits include everything you need to make your factory housing the strongest it can be—including APEX front axle truss, front LCA skids, and inner C-gussets. Order the armor recommended for your Jeep application. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 6 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours both the cast steel differential and FAD (front axle disconnect) and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 40 in. tires on stock JL axles * Bridges the front axle disconnect (FAD/CAD), shown to be one of the weakest sections of the front axle * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids and optional JL Shield are made from 1/4 in. steel * Inner C-gussets are made from 3/16 in. steel
Not Yet Reviewed
$274.99
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$369.99
—
$429.99
Make your animal of an axle even better with Artec Industries AAM 11.5 rear axle trusses. These heavy-duty truss systems reinforce your American Axle Manufacturing axle to take on serious abuse, while also providing a flat surface to mount your upper links. The 3/8 in. thick truss top and 1/4 in. thick gussets incorporate a unique design to strengthen both the axle and the link mounting surface. Artec trusses feature a low-profile so your link joints can be mounted with the ideal geometry, and they allow for a selection of pinion angles. Support your AAM 11.5 rear axle with Artec Industries trusses.
Not Yet Reviewed
$399.99
Artec Industries JK APEX front axle ultimate armor kits furnish everything you need to make your axle the strongest it can be. These packages include an APEX front axle truss, heavy-duty front LCA brackets, heavy-duty shock brackets, inner C-gussets, and APEX heavy-duty tracbar bracket. Armor kits are available for a variety of specific Jeep applications, in both stock and raised track bar height models. How is the ultimate armor kit better than the regular armor kit? This kit includes entire replacement LCA brackets and shock brackets, whereas the regular armor kit just adds a skid plate to the factory LCA brackets. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA brackets, shock brackets, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Gussets and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$406.99
—
$439.99
When you've exceeded he limits of your Dodge 60 front axles, Artec Industries has the solution--heavy-duty trusses. Built from 3/8 in. thick mild steel truss tops with 1/4 in. mild steel ram mounts and gussets, these trusses are precision CNC-cut and bent for maximum strength. They are low-profile and span the entire length of your axle for complete reinforcement. Larger tires and aggressive driving ... maybe it's time to support your Dodge 60 front axles with trusses from Artec Industries.
Not Yet Reviewed
$359.99
More strength is a good thing! Artec Industries Dana 60 rear axle trusses beef up your axles to handle all kinds of abuse. They're built from 3/8 in. thick truss tops with 1/4 in. thick gussets to strengthen both the axle and the link mounting surface. The trusses span the entire length of the axle with their low-profile design that allows link joints to be mounted with ideal geometry. Install complete reinforcement that bolsters your axle's performance—Dana 60 rear axle trusses from Artec Industries.
Not Yet Reviewed
$389.99
A better fit to make your axle stronger and sleeker—Artec Industries Chevy 60 front axle trusses fortify your axle and are less likely to interfere with other vehicle components. Artec trusses are built with 3/8 in. thick mild steel tops and 1/4 in. mild steel ram mount and gussets. They feature a low-profile design and span the full length of your axle for complete reinforcement of the tubes against abuse. Enhance your rig's muscle with the support of Artec Industries Chevy 60 front axle trusses.
( 1 )
$324.99
These Yukon Gear & Axle locking hubs feature all-steel construction, including chromoly internals, for the ultimate in durability and strength. They will not disengage under high-torque applications and default to the locked position under use. Engagement comes from just a 1/3-turn of the all-steel, low-profile bezel that offers improved ground clearance. The Yukon Gear & Axle locking hubs feature a proprietary coating on the locking gears for decreased friction and long life.
( 15 )
$434.99
All Balls Racing complete 8-ball extreme-duty CV axles are designed for more aggressive applications. They'll take on the rough terrain and abuse you put your ATV/UTV through on a frequent basis. These CV axles are static torsion and fatigue-tested, as well as built in facilities that are certified and meet the ISO 9001 quality manufacturing standard—providing you with peace of mind when you're out on the trail. Key features and benefits: * Eight precision ball bearings deliver smoother operation and increased joint strength * Larger chromoly axle shaft * 35 percent larger bearing cages and races * Increased load capacity * 10 to 40 percent stronger the OE and competitor axles * Last up to 12 times longer * Precision-machined for precise OEM fitment * Black oxide coating with a matte finish that covers both joints for ultimate rust and corrosion protection * High performance molybdenum grease reduces heat and friction * Heavy-duty neoprene boots create a waterproof seal * Low-profile stainless steel clamps
( 1 )
$259.30
Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.
Not Yet Reviewed
$259.99
Artec Industries 14-bolt modular trusses yield stronger, sleeker axles that are easier to fit into most any vehicle. If you're doing a swap these modular units are perfect. The heavy-duty trusses are designed to reinforce your axle for serious abuse, plus they provide a flat surface to mount your upper links. Their beefy, low-profile build features 3/8 in. thick truss tops fortified with 1/4 in. thick gussets—a unique design that strengthens both the axle and the link mounting surface. They're also shorter, allowing use with factory leaf spring perches or Artec add-on coil or leaf spring perches. For more muscle with added versatility, choose the quality of Artec Industries 14-bolt modular trusses.
( 1 )
$279.99
Frame your Dana 44 with the strength of Artec Industries 44 rear axle trusses. These heavy-duty units fortify your entire axle to take on and survive off-road abuse. They also provide a low-profile, flat surface to mount your upper control arms in a 4-link setup. Artec 44 rear axle trusses feature precision CNC-cut and bent 1/4 in. thick truss tops and interlocked gussets for maximum strength. Tie your axle to Artec 44 rear trusses and gain the stamina to crawl, climb, and conquer any off-road terrain.
Not Yet Reviewed
$291.99
What is your suspension built on? Artec Industries 8.8 in. modular axle trusses provide the supportive framework and a good foundation for success. Manufactured from precision CNC-cut and bent 1/4 in. mild steel and reinforced with interlocking 1/4 in. thick gussets, these 8.8 in. trusses beef up your axles and the link mounting surface for maximum strength. They have a low-profile design, allowing link joints to be mounted with ideal geometry—and they're shorter, so you can mate them with factory or Artec leaf spring perches. Trusses include trim-to-fit bridges that tie into a flange off the pinion of the axle and fortify the might of the whole truss. Build a system designed to take serious abuse; start with 8.8 in. modular axle trusses from Artec Industries.
( 5 )
$259.99
—
$439.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
